what mess up the gas in cars
09-02-2005, 06:30 PM
#31
0.0 BAR
Join Date: Dec 2003
Posts: 0
Re: what mess up the gas in cars
Originally Posted by BlackDragon
if i found out my car got fucked up by sugar cubes...i know who to go after..
but they poured that all over his truck... about a week later i roll by, the truck is on jackstands, he's putting in a new gas tank (which was good payback I think) but then I look at this paint and it ate all of the paint off.. brand new paint job I think that was a bit too far but whatever, whats done is done..
Originally Posted by hotrex
or you could be like me, and just beat the ---- out of it with a baseball bat.
09-02-2005, 08:50 PM
#34
0.0 BAR
Join Date: Oct 2004
Posts: 0
Re: what mess up the gas in cars
Damn, sucks to hear about that man.
I would loosen all of his lug nuts, crimp his brake lines and smash one window.
He'll be so pissed about the smashed window he won't notice any of the other stuff. Then, right as he drives away, his life goes right down the hole.
I would loosen all of his lug nuts, crimp his brake lines and smash one window.
He'll be so pissed about the smashed window he won't notice any of the other stuff. Then, right as he drives away, his life goes right down the hole.
09-02-2005, 11:47 PM
#37
1.0 BAR
Join Date: Dec 2004
Posts: 551
Re: what mess up the gas in cars
Originally Posted by hotrex
um, you guys are stupid. sugar doesnt ---- your engine. it just settles to the bottom of your tank.
if you want to ---- with him. put bleach in his tank. or draino. something that pits metal. why not just crimp his brake lines.
or you could be like me, and just beat the ---- out of it with a baseball bat.
if you want to ---- with him. put bleach in his tank. or draino. something that pits metal. why not just crimp his brake lines.
or you could be like me, and just beat the ---- out of it with a baseball bat.
09-03-2005, 01:10 AM
#38
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 2,949
Re: what mess up the gas in cars
Or you can send his car to hell with some home made explosives, or make some thermite and light that ---- on fire and run away, Thermite is the same ---- they made in the movie the 6th day with Arnold Scwartziganer...---- I cant spell it, anyway, you get the point if you watch the movie.
Here is step by step instructions on how to make Thermite. Enjoy.
Here is step by step instructions on how to make Thermite. Enjoy.
Thermite II... by Jolly Roger
Thermite is nasty ----. Here is a good and easy way to make it.
The first step is to get some iron-oxide (which is RUST!). Here is
a good way to make large quantities in a short time:
- Get a DC convertor like the one used on a train set. Cut the
connector off, seperate the wires, and strip them both.
- Now you need a jar of water with a tablespoon or so of sodium
chloride (which is SALT!) added to it. This makes the water
conductive.
- Now insert both wires into the mixture (I am assuming you
plugged the convertor in...) and let them sit for five minutes.
One of them will start bubbling more than the other. This is the
POSITIVE(+) wire. If you do not do this test right, the final
product will be the opposite (chemically) of rust, which is RUST
ACID. You have no use for this here (although it IS useful!).
- Anyway, put the nail tied to the positive wire into the jar. Now
put the negative wire in the other end. Now let it sit overnight
and in the morning scrape the rust off of the nail & repeat until
you got a bunch of rust on the bottom of the glass. Be generous
with your rust collection. If you are going through the trouble of
making thermite, you might as well make a lot, right?
- Now remove the excess water and pour the crusty solution onto a
cookie sheet. Dry it in the sun for a few hours, or inside
overnight. It should be an orange-brown color (although I have
seen it in many different colors! Sometimes the color gets fucked
up, what can I say... but it is still iron oxide!)
- Crush the rust into a fine powder and heat it in a cast-iron pot
until it is red. Now mix the pure iron oxide with pure alluminum
filings which can be bought or filed down by hand from an aluminum
tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3
grams.
- Congrats! You have just made THERMITE! Now, to light it...
- Thermite requires a LOT of heat (more than a blow torch!) to
ignite. However, a magnesium ribbon (which is sorta hard to find..
call around) will do the trick. It takes the heat from the
burning magnesium to light the thermite.
- Now when you see your victim's car, pour a fifty-cent sized pile
onto his hood, stick the ribbon in it, and light the ribbon with
the blow torch. Now chuckle as you watch it burn through the hood,
the block, the axle, and the pavement. BE CAREFUL! The ideal
mixtures can vaporize CARBON STEEL! Another idea is to use
thermite to get into pay phone cash boxes. HAVE FUN!!
Thermite is nasty ----. Here is a good and easy way to make it.
The first step is to get some iron-oxide (which is RUST!). Here is
a good way to make large quantities in a short time:
- Get a DC convertor like the one used on a train set. Cut the
connector off, seperate the wires, and strip them both.
- Now you need a jar of water with a tablespoon or so of sodium
chloride (which is SALT!) added to it. This makes the water
conductive.
- Now insert both wires into the mixture (I am assuming you
plugged the convertor in...) and let them sit for five minutes.
One of them will start bubbling more than the other. This is the
POSITIVE(+) wire. If you do not do this test right, the final
product will be the opposite (chemically) of rust, which is RUST
ACID. You have no use for this here (although it IS useful!).
- Anyway, put the nail tied to the positive wire into the jar. Now
put the negative wire in the other end. Now let it sit overnight
and in the morning scrape the rust off of the nail & repeat until
you got a bunch of rust on the bottom of the glass. Be generous
with your rust collection. If you are going through the trouble of
making thermite, you might as well make a lot, right?
- Now remove the excess water and pour the crusty solution onto a
cookie sheet. Dry it in the sun for a few hours, or inside
overnight. It should be an orange-brown color (although I have
seen it in many different colors! Sometimes the color gets fucked
up, what can I say... but it is still iron oxide!)
- Crush the rust into a fine powder and heat it in a cast-iron pot
until it is red. Now mix the pure iron oxide with pure alluminum
filings which can be bought or filed down by hand from an aluminum
tube or bar. The ratio or iron oxide to aluminum is 8 grams to 3
grams.
- Congrats! You have just made THERMITE! Now, to light it...
- Thermite requires a LOT of heat (more than a blow torch!) to
ignite. However, a magnesium ribbon (which is sorta hard to find..
call around) will do the trick. It takes the heat from the
burning magnesium to light the thermite.
- Now when you see your victim's car, pour a fifty-cent sized pile
onto his hood, stick the ribbon in it, and light the ribbon with
the blow torch. Now chuckle as you watch it burn through the hood,
the block, the axle, and the pavement. BE CAREFUL! The ideal
mixtures can vaporize CARBON STEEL! Another idea is to use
thermite to get into pay phone cash boxes. HAVE FUN!!
09-03-2005, 01:38 AM
#39
0.5 BAR
Join Date: Apr 2005
Posts: 147
Re: what mess up the gas in cars
here is a better one buy some valve grinding compound sit it out in the sun let it dry then add it to his oil two weeks later the car will be smoking and using so much oil or you could put some acatone in his gas tank make sure its like a gallon or so is car will get it on for a while till he burns up the motor
09-03-2005, 03:25 AM
#40
1.0 BAR
Join Date: Aug 2003
Posts: 316
Re: what mess up the gas in cars
what ***** up the gas in cars cause he are haveing a sienour lock in and all and wont to mess this kid gay *** neon that all ricerd out
cause he keyed my stang
cause he keyed my stang
