HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   what 2 look 4 (https://www.homemadeturbo.com/general-discussion-6/what-2-look-4-a-337/)

gasser 12-22-2002 11:31 PM

what 2 look 4
 
I just picked up an ihi turbo off an Isuzu I-mark for $50. I really want to know if its in good shape before I use it. I already checked for shaft play and that was non exsistent. what else should I check for.

J-SMITH69 12-23-2002 12:47 AM

Re:what 2 look 4
 
those turbos aren't supposed to have any shaft play ever i believe, only ball bearing turbos are supposed to have play, it lets oil into the bearings or something

its really hard to tell unless you run it on a car. if it blows oil or something then its bad. or you can take it apart and look at the seals... but if you mess with that you'll ---- up the seals taking it apart.

Johnny

mike 94sc2 12-23-2002 01:33 AM

Re:what 2 look 4
 
No, shaft play is normal. When oil is pumped in and the turbo is spinning it rides on a film of oil, it needs some play in order to function.

HMT-Admin 12-23-2002 10:04 PM

Re:what 2 look 4
 
You guys would be suprised, lots of brand new turbos, and reman turbos have shaft play right out of the box.. Its very minor, and nothing to worry about (up and down shaft play) its the in and out shaft play that is the worst.

Jeff

wildman 12-24-2002 08:07 AM

Re:what 2 look 4
 
i bought a brand new core for mine. it has end play..
The oild pressure will pin the shaft to the center of this gap.. that is a normal situation, at some point the play becomes more than the seal can handle, then is when oil will blow out of it. The core's are cheap! look on ebay, got mine for $125 :o


All times are GMT -5. The time now is 04:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands