well--I think he's back at it
 

j-g fab, I should have been leary when he came back but thought I would give him the benifit of doubt. bought a mani last month and still getting excuses. Noticed all of his posts in all fourms have been deleted. I did talk to him on Thursday and hopfully he will not let me down

update vvv down below

Re: well--I think he's back at it
 

Dang. You knew you were rolling the dice on this one. So don't get all pissy when it never comes

Re: well--I think he's back at it
 

damn...i deleted his posts in the sponsors forum after he never got back to me about his sponsorship and didnt log in for over a month. Consider him banned from being a sponsor again.

Re: well--I think he's back at it
 

Re: well--I think he's back at it
 

I did see that earlier

Re: well--I think he's back at it
 

i waited five months for my manifold downpipe setup from him and it never came, i finally got a refund out of his cheap ass after i had my legal office contact his father. next morning my paypal had 1200 in it or somethin.

Re: well--I think he's back at it
 

Well, since he is gone. Check this out. I posted this in the mod forum when James became a sponsor.

I had a customer of mine buy one for his friend because I didn't want to build it for a number of reasons. I am way too busy and I personally don't like building them. He contacted me stating it was fucked and nows hes screwed. I told him to send it and I could see what I could do.

Here is the PM.
top mount
« Sent to: CSaddict on: April 06, 2008, 02:57:44 PM »
« You have forwarded or responded to this message. »

--------------------------------------------------------------------------------

Hey Dave I just wanted to let u know about the top mount go to for sale in the forum and go to 2nd page Apr 1st "bad ass top mount' there i got this thing from BMc race .com.I got for my friends crx i didn"t notice the cuts in the flange I would have got one from u bit I new you where going through a hard time at the moment.So now i feel responsible for this and I told him that the guy who built the ram horn on my civic could probably weld e new flange on it please tell me what u think could it be done I promise dave I will not ask for anything more lol.But if u can fix this or i know u can do it u are a grate welder and fabricator.And your manifolds. are the best.please let me know thanks Shane

Notice how he butters me up. lol Here is the carnage.
Attachment 16436
Attachment 16437
Attachment 16438
Other end.
Attachment 16439
LOL didn't weld inside the collector.
Attachment 16440

Re: well--I think he's back at it
 

tell him you will fix it then just send it to somebody he owes a manifold too

Re: well--I think he's back at it
 

I find this thread funny. One of the first 5 posts in his new sponsorship thread was me telling everyone that they were going to have problems with James and guess what happened.....

Re: well--I think he's back at it
 

Carnac?

Re: well--I think he's back at it
 

I got warned about buying a mani from bmc. Sucks. Dude used to have some real nice work.

Re: well--I think he's back at it
 

Look at that top mount cs posted its hotrex style and thats what has been posted all over the net about this guy he sends off crap. That means his skilll level is low. Anyone can get it right once in awhile getting it right everytime is skilllz.



Hotrex made a couple solid manifolds too but when majority are crap and way delayed on getting done they both fail. The dude is a joke has a business owner and a fabricator.


I have been working alot on manifolds. I will not sell them until I feel it cant get any better. Thats how all my port work is now, I know people arent going to get anything better just equal in quality.

Re: well--I think he's back at it
 

chris do you also port young female assholes? :D :D

Re: well--I think he's back at it
 

I'm sure he does but






I could almost fit a whole fist in my last GF's cornhole. The more get got the more and more she wanted it. Her ass's limit was set at 4 knuckes and a partial thumb. LOL LATEX gloves and water based lotion FTW

Re: well--I think he's back at it
 

an inch away from glory and you didnt take it.

Re: well--I think he's back at it
 

ouch. i never cut my flanges.

Re: well--I think he's back at it
 

Well, James did call me today and assured me that he's just a little behind. waiting for some flanges to come in.
At least he's keeping in contact and did mention payment to HMT

Re: well--I think he's back at it
 

I thought he made flanges? :l

Re: well--I think he's back at it
 

he's a cock and I would never buy from him. his dad was the maker of flanges, so why the ---- can't he get any now? bullshit. his dad was the real BMC race, James is JGfab. BMC Race used to be the ---- til james came along. Now I would buy ---- from either.

Re: well--I think he's back at it
 

Sad.

Re: well--I think he's back at it
 

i'm running a jg ram-horn; its about 3 years old; really nice piece but its passed hands about 10 times

Re: well--I think he's back at it
 

well a little update, James fucked me, went to paypal they closed the case, fucked me too. Went to my credit card comp.and let them know what happened, we'll see what we can do. A few days later credit card co calls me and asked if I had other info I could give them, I thought and then relized that James was using his fathers name ( BMC ) to sell things and take orders. I contacted BMC to let them know the situation and what james was doing and because of this BMC could also be lieable Guess what,yesterday when I get my credit card bill I open and to my surprise I have a 1209.61 credit. YEP, my CC comp took care of me and fucked James. I dont know who paid back the money but if it was his Dad I hope Sam WOOPED his ass It does pay to keep all conversations

Re: well--I think he's back at it
 

pretty much same thing with me along wihle ago, finally got it resolved by going through his dad.

Re: well--I think he's back at it
 

James is a ------- idiot that is my topmount that Dave fixed for me. U the man Dave, 4 manifolds later not one problem. oh yeah know one shuold deal with james . get a manifold from dave It is worth it.

Re: well--I think he's back at it
 

Quoted for correctness.

Re: well--I think he's back at it
 

Before I got into doing my own CNC milling I used Sam (BMC) for custom flanges and prototyping, he was slow as balls on shipping but the machining quality was very good and he was damn cheap. Also seemed like a good hard working guy, someone you could trust. I don't think he beat his son enough though. The kid just doesn't get it.

Re: well--I think he's back at it
 

that's shitty his dad has to take care of his son's fuckups

guess he feels bad for ejecting defective sperm

Re: well--I think he's back at it
 

I really hated ( lol ) to envolve his dad, but with him using his dads name I really had no choice if I wanted my $ back
A persons got to do what he has to do. Pretty much so that James has dissappeared from the internet

Re: well--I think he's back at it
 

The old man is of such moral character he should have been able to smell his son's shitty diaper. Maybe he let the boy run things like that so you could collect from him, because he feels bad about spawning such an incompetent fucktard.

Re: well--I think he's back at it
 

Like a case of the HotRex herp, I'm sure he will flare up in the future.

Re: well--I think he's back at it
 

not here...

Re: well--I think he's back at it
 

Not here, but he will do it on other sites until prosecuted.

Re: well--I think he's back at it
 

Children cant run a business.

Re: well--I think he's back at it
 

he did this pretty much exactly a year ago with me and miltiple others, got "into the business" again. took the money, blew it all on "other things" then never produced any product for about 4 people. Just fell off the face of the earth.

Then he came back about 6 months after that, so id say like 6 months ago or so. now looks like hes gone again with more people's money. lol

Re: well--I think he's back at it
 

WEll rule one is a succesful business always has a project car never done :y. I know myself Im too busy working/buying new tools/reordering inventory to ever get a chance to build cars. It sounds odd but really its the truth. The only shops that are succesful and have race cars running are people who have alot of backing. A 20 year old kid doesnt have any neither do I.

Re: well--I think he's back at it
 

thats why i never take money up front for manifolds. i always take payment when the manifold is done and ready to ship that way if i get backed up the person can choose to wait or go elsewhere.

Re: well--I think he's back at it
 

Alot of the time when I know something is going to take a couple weeks to do I just have them throw a small down payment and when its done I request the rest of the payment works out pretty well.

Re: well--I think he's back at it
 

that works out best when someone requests something a little uncommon and not likely to be ordered by someone else so that way they are obligated to pay or lose the deposit incase they change thier mind.

Re: well--I think he's back at it
 

Yup thats how I charge for the itb's which I only do 2 sets a year or so.

Re: well--I think he's back at it
 

yea me too when i decide to make some ultra gangster itb's for all my friends and there john deeres