Turbo 5.0 Mustang sneak peak *update* x3 *update on ssauto turbo*
#51
Re: Turbo 5.0 Mustang sneak peak
Originally Posted by random-strike
is there a reason you come into every thread just to stay stupid ---- and talk smack? don't get enough attention in real life?
#52
Re: Turbo 5.0 Mustang sneak peak
Got all my intercooler stuffs put together. This kit worked out well and there is no welds on the piping. except for the bov.
This shitty ***** pipe is really cheap and thin. its hard to weld to it when you have a welder than only has two settings nog and super nog. it burns through easy and it basically looks like ----.
Going to have to check it over for leaks and might have to use a peice of "normal" pipe there which will be kinda lame since it wont match the rest of the pipe.
almost done. still need vband for exhaust, buy a new set of header bolts, and its a pain in the *** to put on the headers cause they are the cheap bbk shitty wannabe headers with seperate flanges. I need misc bolts and nuts as you can see with the turbo, i also need some more hose for oil line into cooler then to turbo, and also plug the passenger side return and see if i can get my other side return to work.
I also have to have a key made cause i lost the keys to the damn thing about a month ago.
kinda sucks you can never see the interfooler
This shitty ***** pipe is really cheap and thin. its hard to weld to it when you have a welder than only has two settings nog and super nog. it burns through easy and it basically looks like ----.
Going to have to check it over for leaks and might have to use a peice of "normal" pipe there which will be kinda lame since it wont match the rest of the pipe.
almost done. still need vband for exhaust, buy a new set of header bolts, and its a pain in the *** to put on the headers cause they are the cheap bbk shitty wannabe headers with seperate flanges. I need misc bolts and nuts as you can see with the turbo, i also need some more hose for oil line into cooler then to turbo, and also plug the passenger side return and see if i can get my other side return to work.
I also have to have a key made cause i lost the keys to the damn thing about a month ago.
kinda sucks you can never see the interfooler
#55
Re: Turbo 5.0 Mustang sneak peak *update*
Originally Posted by random-strike
Nice work man I cant wait to see some vids of that thing rippin down some ricers!
Edit: If that turbo were any bigger you'd need a trailer!
#56
Re: Turbo 5.0 Mustang sneak peak *update*
Originally Posted by scottsi
dyno sheets? video? i wanna see 'whatedo'
i hit my goal of one million horsepower which i was happy about
but in reality i broke my timing light so its at "run and idles" time so i cant rip on it. i did get the blow off to blow off and got me wet in the pants. this turbo is a lot more laggy than the twins by a huge margin.
leeann is out of town with the camera, so i cant take any pictures till tomarrow. the engine compartments looks really good.
#59
Re: Turbo 5.0 Mustang sneak peak *update*
Originally Posted by 88dx
^^^^ drive that thing to jeffs im sure after a few beers ull be doing full rippers
#60
Re: Turbo 5.0 Mustang sneak peak *update*
Hey there i found the center caps for the rallies.Also i see the single setup is coming along.Did i read it right you are having laggy spool time? Is that the same turbo i have on the Diesel?
Some day i will get the turbo truck back on the road.
Some day i will get the turbo truck back on the road.