Turbo 5.0 Mustang sneak peak *update* x3 *update on ssauto turbo*
 

Im going to use an exhaust clamp at the bottom portion. it should be here monday.

The upper portion on the merge... i had it real pretty. then leeann comes out takes one look at it and is like... is that going to hit the radiator? sure as ---- it did and i have to redo it now its been fluxor'd.

The paint was still kinda wet cause i found some bare spots while i was putting them back on for the picture

I still need to buy a 3" vbang flange for the exhaust, and some injectors and a maf. probably get it running with the fmu and then buy the injectors and maf next paycheck.

I have all the intercooler piping and the fmic ready to go. i have to do some chopping hopefully no welding on the charge pipes.

ssauto hks knockoff is set at 8psi.

almost finished. should've started a long time ago but the stang has sat for about 2 months.

https://www.homemadeturbo.com/jbliss...mustang214.jpg

https://www.homemadeturbo.com/jbliss...mustang213.jpg

https://www.homemadeturbo.com/jbliss...mustang215.jpg

https://www.homemadeturbo.com/jbliss...mustang216.jpg

https://www.homemadeturbo.com/jbliss...mustang217.jpg

https://www.homemadeturbo.com/jbliss...mustang218.jpg

https://www.homemadeturbo.com/jbliss...mustang212.jpg

Re: Turbo 5.0 Mustang sneak peak
 

What turbo is that? And whats the goals for this guy.

Re: Turbo 5.0 Mustang sneak peak
 

T70 one million horsepower

Re: Turbo 5.0 Mustang sneak peak
 

Finally!

Re: Turbo 5.0 Mustang sneak peak
 

looks much better than the previous setup so far, nice job

Re: Turbo 5.0 Mustang sneak peak
 

how is that turbo bike doing.

Re: Turbo 5.0 Mustang sneak peak
 

very nice driveway decoration

Re: Turbo 5.0 Mustang sneak peak
 

DP looks likeits gonna be a tite bitch... Ive got a 3" vband flange laying around...no clamp thpough

Re: Turbo 5.0 Mustang sneak peak
 

where's the DP headed?

this thing is gonna rip tits! O0

Re: Turbo 5.0 Mustang sneak peak
 

do is just going to be straight pipe'd exit out of the bottom

Re: Turbo 5.0 Mustang sneak peak
 

That DP really looks like it wants too make a exit out the side of the fender :6

Re: Turbo 5.0 Mustang sneak peak
 

I'm surprised you didnt get flamed for posting this on honda-tech lol

Re: Turbo 5.0 Mustang sneak peak
 

link to h-t thread?

Re: Turbo 5.0 Mustang sneak peak
 

Your sig pic doesn't hate on H-T enough. It looks like a ------ gay dee em wing advertisement.

Re: Turbo 5.0 Mustang sneak peak
 

Run that ---- straight out the fender!!!

Awkward ------- position for it though

Re: Turbo 5.0 Mustang sneak peak
 

its abotu ------ time :y

Re: Turbo 5.0 Mustang sneak peak
 

looks kinda slow
how many liters of t70 powered ford is it going to take to beat a stock dseries?

Re: Turbo 5.0 Mustang sneak peak
 

uhhh... lol

Re: Turbo 5.0 Mustang sneak peak
 

looks good...thers a local around where i live who has a similar setup and runs a holset bigger injectors, fmu and a dsm bov and the damn thing rips ass ...it should be fast :y

Re: Turbo 5.0 Mustang sneak peak
 

after yuriy rode in my ford, he got to see the lack of balls it had. 4.9l, 140hp, and can't break 90 floored :S

Re: Turbo 5.0 Mustang sneak peak
 

4.9 I6 in F150 VS. 5.0 V8 Turbo in Mustang

I wonder if theres a difference there, yuriy :S

Re: Turbo 5.0 Mustang sneak peak
 

nope 1.6l sohc vtec = best motor ever made

Re: Turbo 5.0 Mustang sneak peak
 

damn right it is...

Re: Turbo 5.0 Mustang sneak peak
 

GOoks engineer better than us dumb hicks right?

Re: Turbo 5.0 Mustang sneak peak
 

Looks better because he let me do part of the welding on it ;)

Re: Turbo 5.0 Mustang sneak peak
 

Wow.Theres as much space in there as an EJ1.Looks good.

Re: Turbo 5.0 Mustang sneak peak
 

just throw non-wastegated holset at the 4.9, lets see how you melt cast iron pistons

Re: Turbo 5.0 Mustang sneak peak
 

lol

Re: Turbo 5.0 Mustang sneak peak
 

Your neighbours must hate you
https://www.homemadeturbo.com/jbliss...mustang212.jpg

Re: Turbo 5.0 Mustang sneak peak
 

they do but this is the real reason. they are trying to sell their house too. and the funniest part is that it has looked the same since the day i put the headgaskets and studs in lol (which was about 2 months ago)
https://www.homemadeturbo.com/jbliss/350x/350x_66.jpg

Re: Turbo 5.0 Mustang sneak peak
 

Its still gonna be as slow as ever, why would single turbo make you faster? better have some replacement headgaskets ready. put some heads on it and some arp headstuds and then it'll be worthwhile.

Re: Turbo 5.0 Mustang sneak peak
 

dumb wannabes never listen, read, or learn.

it has MLS solicor gaskets and ARP studs.

Re: Turbo 5.0 Mustang sneak peak
 

power to weight ratio owns. :y

Re: Turbo 5.0 Mustang sneak peak
 

yea but wheres the power part? ;D

Re: Turbo 5.0 Mustang sneak peak
 

my mustang weighs 3100lbs stock

and it has no interior no backseat etc... it probably weighs 2800lbs which is as much as my old integra and pretty much any civic thats not gutted

it doesnt weigh a lot.

Re: Turbo 5.0 Mustang sneak peak
 

My crx only weighs 2,000 and it has full interior :6

Re: Turbo 5.0 Mustang sneak peak
 

my motor weighs that much

Re: Turbo 5.0 Mustang sneak peak
 

Looks good.Im seriously impressed by the fact you actually made a atempt at something looking good what's next gas mig welds :o cant wait to see it done should be a beast.What is going on with the T5 swap?I cant remeber if you got that done or left it for later?

Re: Turbo 5.0 Mustang sneak peak
 

Lemme know how the Chinese HKS holds up, my buddy has one lying around and I'd throw it on something if it works.

Re: Turbo 5.0 Mustang sneak peak
 

i ditched the T5. if and when i go to a manual its going to have to be something strong. like a tremec or tko

ive seen them used a few times with no problems. its hard to find a decently big wastegate for a decent price