HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   trying to paint civic (https://www.homemadeturbo.com/general-discussion-6/trying-paint-civic-60593/)

bigciv 04-30-2006 06:57 PM

trying to paint civic
 
im gonna paint my 2dr 95 civic.... how much paint do i need? 1 gallon? or more

tranceminister 04-30-2006 07:17 PM

Re: trying to paint civic
 
What type of paint are you using? Normally one gallon will do. You figure you'll end up reducing it to maybe just less than 2 gallons but it's better to have more paint than not enough and run out during your spray job.

91backinblack 04-30-2006 07:23 PM

Re: trying to paint civic
 
How many coats are you doing? I would go with 2 to be on the safe side. Like tranceminister said, you want to avoid having to go buy paint in the middle of your spray at all costs.

bigciv 04-30-2006 08:21 PM

Re: trying to paint civic
 
im getting this enamel paint ---- from this ---- online and it comes w/ 1 gallon of paint and pint of reducer and a pint of thinner or something like that.....i plan to just prime it, 1 time coat it, and than clear coat it....so a 2 stage paint job i guess you can say

BoosTedZSix 04-30-2006 08:27 PM

Re: trying to paint civic
 
1 gallon would be more than enough. I used one gallon of single stage paint to paint a 4 door accord and a 240 ;)

CRXDrew 04-30-2006 08:51 PM

Re: trying to paint civic
 
lol, 2 gallons?

You would probably be able to get away with 2 QUARTS! I bought a gallon and had plenty left. Remember, you're not just spraying straight paint, its gonna thinned down quite a bit before it goes in the gun.

bigciv 04-30-2006 08:55 PM

Re: trying to paint civic
 
right on...yea i didnt figure it could take more than a gallon at the most....does anybody know anthing about acrylic paint and enamel paint?....and what the differences are? its gonna be just jet black so i dont think it will matter

91backinblack 04-30-2006 09:19 PM

Re: trying to paint civic
 

Originally Posted by CRXDrew
lol, 2 gallons?

You would probably be able to get away with 2 QUARTS! I bought a gallon and had plenty left. Remember, you're not just spraying straight paint, its gonna thinned down quite a bit before it goes in the gun.

Well ---- fuckers... i didnt know you were talkign about a 1 coat deal.

1991civicsi 04-30-2006 09:50 PM

Re: trying to paint civic
 

Originally Posted by bigciv
right on...yea i didnt figure it could take more than a gallon at the most....does anybody know anthing about acrylic paint and enamel paint?....and what the differences are? its gonna be just jet black so i dont think it will matter

USUALLY enamel is an oil based paint, and acrylic is a water clean-up. Urethane is my favorite.

bigciv 04-30-2006 10:46 PM

Re: trying to paint civic
 

Originally Posted by 1991civicsi
USUALLY enamel is an oil based paint, and acrylic is a water clean-up. Urethane is my favorite.

using enamel would be fine right?


All times are GMT -5. The time now is 12:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands