took the si to the dyno.... UPDATED *w/video and dyno chart*
 

well, there was a dyno day here in town on saturday and i wasn't planning on running b/c it was 40 bucks for two pulls :-\ well, when i got there, there was no one there and i kind of felt bad for the guy for devoting his saturday at the request of local rice....... errrrrrr, i mean racers, so i decided to run. 236.5 whp 176.8 tq :P not too bad numbers i guess, this was on 12 psi with stock cat, 2.5" crush bent dp, and 2.25 after cat pipe. if i ditch the cat and run a full 2.5" mandrel exhaust, i think i'll pick up at least 10 whp, and with stock clutch too. i think with exhaust, new clutch, and some tuning, i could hit 260 whp easily on the same psi. i'll scan my dyno sheet in later and maybe even put the video if you're lucky ;)


http://www.newbieforces.com/files/dy...4444444444.jpg

you can see i went a little lean between 5 and 7k, i thought it was a lot worse for some reason, at first in boost it was staying right at around 12 i was pretty surprised when i was watching it, then it started climbing a little but dropped back down. could definitely use a little tuning. as far as the video, it prolly sucks, but it's better than nothing. you can see the afr on the bottom of the screen.

YOU MUST RIGHT CLICK AND SAVE OR IT WON'T WORK!!!!!!!!!!

http://www.gameroom.com/projekteg/dyno%20002.avi

Re:took the si to the dyno.....................
 

I wanna see the video! put some street footage in there while your at it :P

Re:took the si to the dyno.....................
 

Nice numbers. I still can't believe you're running 12psi on that stock b16. :o

Stan

Re:took the si to the dyno.....................
 

i was hoping for around 250, but considering my exhaust set up (lack of), i'm not surprised i didn't reach it. this is also with no tuning, my afr went a little lean between 5 and 7k and reache 13.5:1 at 6k, i wasn't too concerened, leaner is meaner ;D :P ---- it, i'll push 14 psi on this bitch with some tuning, i've got a spare b18 block, that will just motivate me to build it ;)

Re:took the si to the dyno.... UPDATED *w/video and dyno chart*
 

bump for video and pic :P

Re:took the si to the dyno.... UPDATED *w/video and dyno chart*
 

some dude here in winnipeg hit 344 whp on 12 psi on a mustang dyno i thing, no timing retard maybe even timing advance who knows, it granaded after 2-3 months i thing but f@ck 344@12psi on a stock b16 so they can hold alot of power turn up the boost man ;D

Re:took the si to the dyno.... UPDATED *w/video and dyno chart*
 

i plan on it as soon as i get my afr's in check, also i'm running 1* retard per psi, that's quite a bit of retard, there's a lot of power to pull out of it, i just need to get a good tune and adress the other issues i mentioned. i don't think i will have a problem reaching 300 whp safely at about 14-15 psi.

Re:took the si to the dyno.... UPDATED *w/video and dyno chart*
 

Nice #'s

I always like to see a good engine pushed to its limits!!!

Re:took the si to the dyno.... UPDATED *w/video and dyno chart*
 

Cool video. I'm still surprised with the boost. Where do you live again? it's definately projekteg vs. stan now. ;D

Re:took the si to the dyno.... UPDATED *w/video and dyno chart*
 

There are a lot of stock block B-series engines with 300 hp...It's nothing special.