Stroke your D16!!
 

d17 crank fits!

http://honda-tech.com/zerothread?id=711756&page=2

Re:Stroke your D16!!
 

hummm...I dont know if I buy this.... ???

its bacially a D17 Crank/Rods/Pistons...in a D16. No need to bore or mill or anything??? just put it in and your stroked? --nice wording...I would like someone to brake this down 'barney style'. Any one have anything else.

Re:Stroke your D16!!
 

yes.. the d17 crank has longer throws. the rods are the same length as d16a6/z6/y8. but the d17 pistons are shorter (so u dont go through the head with the pistons at TDC) The d17 block is the same height as d16.

read that thread. he already did it and it's running.

Re:Stroke your D16!!
 

nice for stock NA
good torque,

Re:Stroke your D16!!
 

That got me thinking...The Old one destroked his D16 to 1.5 liter for a better R/S ratio 1.70 ..
Over here we have D13 and D14's running around...Maybe their have shorter stroke crank's.....but I think they won't fit like the D15's :(

Re:Stroke your D16!!
 

so a D17 crank, and D series rods and D17 pistons.

Re:Stroke your D16!!
 

the d17 rods are a little thinner than the d16 rods, and need to be machined. like putting ls rods on a d16 crank. other than that, its pretty straight foward.

i have been tossing the d17 turbo idea around for a while now.

Re:Stroke your D16!!
 

use d17 crank w/ d17 rods w/ d17 pistons.. ;) no machining needed.

keep on reading that thread i linked.. I asked him to break it down ..

Re:Stroke your D16!!
 

He'll be at the Niagara meet, ask him about it then ;)

Re:Stroke your D16!!
 

Theres a junkyard around here, its the kind where the old guy sits in his chair under the tree and says yea the cars are over there, go find it. He has 2 older tegs with D17 (usZC) one had 14X,XXX and the other like 80XXX miles. He wants $200 for each, and that price usally changes every time I go. Im gonna have to go get them I think...
No turbos though. Someone already got em all...
DAM IT! >:(

Re:Stroke your D16!!
 

uhm, those are d16a1 motors. d17's are in the 2001+ Civic EX (canadian Si).

Re:Stroke your D16!!
 

thats amazing. i want to see the dyno result asap. I would have never thought of that

Re:Stroke your D16!!
 

no ---- huh. what was I thinkin ::)
i still might get one of those motors though

Re:Stroke your D16!!
 

d16's have shitty R/s ratios and this just makes it worse:-\. IMO I don’t think it’s worth it.
steve

Re:Stroke your D16!!
 

i know what he used, but the d17 rods are poopy like d15b7 rods. i would rather toss in some d16 rods and just have them shaved. or eagle d16 rods and have them shaved.

Re:Stroke your D16!!
 

not a bad thought but for 600 throw forged internals in your d16 and roast his tits

Re:Stroke your D16!!
 

No worse then a stock d17 engine.. they rev to 7.2k (like a z6)

Re:Stroke your D16!!
 

Honda stroker.. they have thought of everything.

Anyone know of any other blocks that can be stroked out? N/A Dyno results on the D16/17 would be nice to see.

Re:Stroke your D16!!
 

eagle (i think) has a stroker kit for b16/b18.

Re:Stroke your D16!!
 

Yeah but it cost like two grand. Everything is forged and it comes with the crank pistons rods and basicly everything you need to put it in.

Re:Stroke your D16!!
 

there are lots of stroker kits out there. toda has a bad ass one. toda has bad ass everytihng (for all motor, but they arent about HP and time slips)

http://www.todaracing.com/products/h...roker_kit.html

that is for all of those rich kids whose dads pay for everything

Re:Stroke your D16!!
 

Yea in this business, toda and all those fuckers dont keep in mind the broke street racer, but they would be stupid if they did, they couldnt stay in business without rich boy

Re:Stroke your D16!!
 

You know, I can honestly say I think I would be jelious if I came accross anyone with an all motor spoon civic, or Jun or Toda or anything like that. But then I would think about it again, and I would think what a ------ idiot. I couldve built something way faster for like 1/8th of the cost! It all goes back to the sayin
dont hate the player, hate the game

This CRX im always ------ with, this kid paid someone 5300 bucks for someone to install an all motor, (I H E)with all LS ----, ECU, Tranny, Intake M, and axles. We were all so pissed at him when he had it done.--even longer story, the kids a frickin idiot. Now I gotta ---- with it all the time cause its such a pile. Hey, once again, hate the game.