HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Speed Bleeders FTW (https://www.homemadeturbo.com/general-discussion-6/speed-bleeders-ftw-82107/)

jinxy 09-02-2007 03:27 PM

Re: Speed Bleeders FTW
 
I'm talking about the guy ho used normal bleeders but hooked an air compressor with a spare reservoir to the master cylinder

Tom-Guy 09-02-2007 03:30 PM

Re: Speed Bleeders FTW
 
That's interesting. In fact, I think I remember the thread linked to on HT.

You think that'd strain the seals in any unwanted way?

jinxy 09-02-2007 03:37 PM

Re: Speed Bleeders FTW
 
depends on how much pressure you set the regulator to. the only think i'd worry about is the reservoir on the master cylinder blowing off or cracking.

Tom-Guy 09-02-2007 04:36 PM

Re: Speed Bleeders FTW
 
Cracking? I thought Toyotas got good Nissin stuff that wouldn't do that.

Scott-EP 09-02-2007 04:46 PM

Re: Speed Bleeders FTW
 
front brakes have around 250psi with a good pedal stomp and the rears are around 150psi. the only worry you would have would be messing up the reservoir. but you really only need about 20psi to bleed brakes. i have bled brakes with a big tank of fluid and an air compressor plenty of times. i have always done it backwards though. they make fittings that will connect with the bleeder. then you pump the fluid backwards. you can get an old cap and put a fitting in it with a hose and let that dump into another container.

i hope all of that makes sence

Jmunk 09-02-2007 05:16 PM

Re: Speed Bleeders FTW
 
Speed bleeders are bleeder screws with a built in check valve. Open the bleeder screw up 1/2 turn, pump breaks, fluid comes out and the valve doesn't let air in. You can do a corner in a min or so. www.speedbleeder.com I bought mine at the local parts store for cheaper, but same concept.

jinxy 09-02-2007 10:46 PM

Re: Speed Bleeders FTW
 

Originally Posted by Joseph Davis
Cracking? I thought Toyotas got good Nissin stuff that wouldn't do that.

the cars 21 years old, so I try not to count little things out like that.

joebowlr21 09-02-2007 11:04 PM

Re: Speed Bleeders FTW
 
http://www.matcotools.com/ProductImages/mv6830a.jpg
I use air to bleed brakes with this bad lil bitch...

Thats what i use at work to flush and bleed brake systems......works tits on cars with abs also.comes with an additional resevior u place on top of the master cylinder that keeps the brake fluid topped off so you get no air pockets. cost me about 160 i think.....but with all the brake flushes i did last month it paid for itself already.

using air to bleed brake = ftw! :6


All times are GMT -5. The time now is 02:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands