HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   snapping axles (https://www.homemadeturbo.com/general-discussion-6/snapping-axles-90333/)

accordepicenter 03-23-2008 03:54 PM

Re: snapping axles
 
somtimes over time the metal fatigues and they just snap, but thats only the case for the outer cv's usually, if your breaking the actual shaft and not the joint then your just overpowering them

rudebwoy 03-23-2008 04:51 PM

Re: snapping axles
 

Originally Posted by accordepicenter
somtimes over time the metal fatigues and they just snap, but thats only the case for the outer cv's usually, if your breaking the actual shaft and not the joint then your just overpowering them

the shafts are not broken, the joints that goes into the hubs are.
I am thinking of getting some dss level 2.9 can't afford anything higher. I would love to get some autozone lifetime warranty, but I am out of warranty zone I think. gonna try though.

JonDouglas 03-23-2008 10:29 PM

Re: snapping axles
 

Originally Posted by bigdaddyvtec
STOCK OEM Honda Prelude axles taking over 600 WHP RELENTLESSly beaten.

Too bad the trans breaks before you can truly stress the axles to the point of failure.

:P

Zeniceguycrx 03-23-2008 10:41 PM

Re: snapping axles
 

Originally Posted by highroller54
I dont see why they both would break at those speeds, nothing locked up or anything?

thats what happens when u seeeeeeeeZ the engine at 260

rudebwoy 03-24-2008 04:46 AM

Re: snapping axles
 
the engine did not seized, still running strong as ever. its just stress on old axles thats all.

J-MAN 03-24-2008 04:51 AM

Re: snapping axles
 

Originally Posted by snm95ls
Too bad the trans breaks before you can truly stress the axles to the point of failure.

:P

hahaha kinda along the lines i was thinking.

back on topic, wtf never heard of axles breaking anytime other then launching

must have done some solid work last year with them.

nicko360 03-24-2008 05:13 AM

Re: snapping axles
 
your lucky that just one axle didnt snap, you would have been fucked

J-MAN 03-24-2008 05:17 AM

Re: snapping axles
 
i was thinkign it would be worse at those speed if just one snapped ???, wouldn't that pretty much jerk you to one side?

rosario4124 03-24-2008 12:21 PM

Re: snapping axles
 
pics of your face when it happened? :o haha

rudebwoy 03-24-2008 04:08 PM

Re: snapping axles
 
it was very scary, but I kept control and did not panic , good thing I had 4 lanes to swerve in. I stoped 25m in front of a 300m tunnel.


All times are GMT -5. The time now is 12:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands