Re:small radiator for CRX?
 

http://www.shortyz.net/radiator1.JPG
http://www.shortyz.net/radiator2.JPG
http://www.shortyz.net/radiator3.JPG

how much u pay?
turbohf u got msn or someshit?

Re:small radiator for CRX?
 

k, now im seeing X's...

Re:small radiator for CRX?
 

what..
i aint seeing X's
i fixes it :D

Re:small radiator for CRX?
 

It is a '94 Del Sol DOHC VTEC radiator to be exact.

It sits low, because of my custom brackets... it's the only way that it won't hit the hood in my car. Fortunately, it won't be there much longer... i'm going to be switching to a custom setup in the next couple of months ;) And yea, it does suck ass that the manifold is hitting that POS VIS hood... it's only going to get worse before it gets better. There is a taller deck height engine going in, which means the manifold is "movin' on up"... maybe time to cut the bottom of the hood completely out ;D

Nope... stock crossmember. I'm just using custom radiator mounts :)

Re:small radiator for CRX?
 

john you should try shimming the engine mounts with some washers. i have never tried this but have heard of it gotta be wourth a try.

Beau

Re:small radiator for CRX?
 

If i shimmed it, it would wind up needing some thick-ass washers to do it... the head is already sitting higher on the block because of the thicker headgasket (thats why the valve cover hits... the manifold would have hit either way), and the engine that will be going in is going to be MUCH taller than this engine, so shimming is pretty much out of the question for anything long-term... but yea, until i get the other engine in there, shimming it would probably be a good thing :)

Re:small radiator for CRX?
 

take the hood off and drive around like they do in the fast and ferious

Re:small radiator for CRX?
 

Dont you remember, we had to shim my old ZC motor? it use to rub really bad. I should probably shim my motor right now, since it rubs incredibly bad..

Btw, thanks John for checking out the new board.

Jeff

Re:small radiator for CRX?
 

take the hood off and drive around like they do in the fast and ferious

Actually, it probably wouldn't look too bad like that... hehe. :P

Btw, thanks John for checking out the new board.

Jeff

Not a problem Jeff ;) It's definately looking good. I was wondering when you'd be taking this step, since it seems only logical for a how-to type site to have some sort of forum. Anyhoo, maybe i'll be able to lend a hand every now and then over here as well as at that "other" board... haha ;D

Re:small radiator for CRX?
 

we dont talk about the "other" board here ;)

Mind posting your pics to your setup in our FI section? I am sure some guys would appricate it.

Jeff