Re: Skinny E Turbo Almost done 56k eat a cookie
good ----, i did an install like that a few months ago with legacyf22 and midniteracerx, it was a bitch with the ic in the engine bay, good job
|
Re: Skinny E Turbo Almost done 56k eat a cookie
Is that a DSM T25? Bet that ---- blows off with an idle rev
|
Re: Skinny E Turbo Almost done 56k eat a cookie
ok we are working on the IC problem with it getting hot
we have 3 options 1) hood scoop 2) cut a hole in the headlight where the brights are and run a PVC pipe with a scoop underneath the IC 3) a fan its more an likely going to be a fan, probably a couple computer fans. Fuel is Uberdata and some DSM injectors (I don't know what size have to wait until Skinny E replies) and yes the turbo is t25 off a DSM. like i said in my first post it spools quickly most of the technical stuff your going to have to wait for Skinny E to reply. I don't know which parts are from what car or what he used, I just helped install it (since no one else would) |
Re: Skinny E Turbo Almost done 56k eat a cookie
About time he got that done. Why did he decide to mount the intercooler in the engine bay ??? I'm not big on Hondas, but is it hard to do that with the F22?
|
Re: Skinny E Turbo Almost done 56k eat a cookie
why didnt you mount the smic in the pass side fender and behind the bumper etc, RENR stylez... i bet it would work great like that
|
Re: Skinny E Turbo Almost done 56k eat a cookie
The setup is as follows
dsm manifold dsm 450's saab intercooler 1g bov 2'' and 2.5'' mandrel t25 I know its too small but I needed something good for cheap 2.25'' exhuast from turbo back stealthmode oil lines gauges autometer and a ricer flashy light for sunpro uberdata p06 I put the intercooler there because it looked like it could be done so I did it, I bought a fan today for it as well, the hyundai is my pizza delivery car/winter beater, I don't know if I should mod it or not, I've already elimated powersteering on accident. The pump seized, got rid of ac, cone filter cause I had an extra one, and I may do exhaust. I'm waiting for a turbo model to come into the junkyard so I can swap engines. If I can ever find one. Oh yeah I beleive the car won't rev past 3500rpm cause the map sensor is either bad or can't take boost, so I'm going to the junkyard tomarrow to take as many as can fit in my pockets. ;D |
Re: Skinny E Turbo Almost done 56k eat a cookie
Good to see someone found a use for my old parts. :)
For the IC heres what I'd do; make an air duct from the bumper up to the IC. You could cut a hole in the bumper and run big hose from there right up to where the intake resinator came through the metal into the engine bay. Then I'd make an IC sprayer and THEN raise the back of you hood w/a few washers/longer bolts to allow the air to escape. Oh, when you go to the track, bring plenty of ice/ice water so in between runs you can cool that puppy down. |
Re: Skinny E Turbo Almost done 56k eat a cookie
Thanks for selling me your old parts^
|
Re: Skinny E Turbo Almost done 56k eat a cookie
Yeah if you don't already have the Uberdata running in there then it'll go into limp mode (I think). I think it also does the same thing if you go above 10psi on a stock MAP...somebody who knows for sure should chime in here.
|
Re: Skinny E Turbo Almost done 56k eat a cookie
skinnye, marry me. your accord is sex.
|
All times are GMT -5. The time now is 08:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands