site newbie

Closed Thread Subscribe

Thread Tools

Search this Thread

12-16-2002, 10:29 AM

Novtec1

0.0 BAR

Thread Starter

Join Date: Dec 2002

Posts: 15

site newbie

well gotta say this place is really gonna help me a lot. im in the military stationed in Germany...don't have access to many parts and the parts i do have come off my talon..(yea i recycle) so im gonna need you guys/gals help. i gott 91 ls i wanns boost so far i have

dropshop mani( in the mail..i hope)
14b with 20 miles (my old turbo)
starion ic
450 injectors w/ safc
jg1001 cams and ported haed
oil pan with return line
1g bov

i need:
a pump
ic piping
assorted guages
assorted line (ie oil, vac0

if you guys can help me out and point me in the right direction it would help a lot. in germany resorces are limited but i'll make it happen.... built my talon here i think i can do this integra too. im looking forward to learning and putting this kit together . thanks

12-16-2002, 01:39 PM

HMT-Admin

Administrator

Join Date: Dec 2002

Posts: 13,991

Re:site newbie

Charge piping and stuff like that you can get pretty creative on that. You can use exhaust piping, radiator hoses, plastic piping (not rec) aluminum piping etc etc. Nobdoy is just going to have a bolt on IC kit for your car. They dont even have that over here. As far as gauges goes, cant you just order through summit? wont they ship worldwide? if NOT, Demontweeks Performance is located in the UK, and have tons of turbo ----, BOV's, Turbo parts fittings etc.

You really wont need a fuel pump if you are going to use the 450's and the afc hack. The pump is good up to 10lbs.

Good luck
Jeff

12-16-2002, 03:17 PM

Novtec1

0.0 BAR

Thread Starter

Join Date: Dec 2002

Posts: 15

Re:site newbie

kool well as for guages im getting greddy ones ...i don't have a problem getting those. the biggest problem is the IC piping. but i guess im gonna have to be "creative". theres not even a place here to get piping.. thinking about calling summit and getting some and making my own. anyway...thanks for the response.

12-18-2002, 08:14 AM

purpleworm

0.0 BAR

Join Date: Dec 2002

Posts: 23

Re:site newbie

There has to be an exhaust shop in germany that sells exhaust and has a bender. If you got them to bend you up a couple piece then you would be in. I think summit also carries a couple 180 degree bends that can be cut at different spots to give you some crazy angles. Takes a bit of work but both would be cheap and it cold look great with some work.