Shit I've been working on... Pics
 

Been doing lots of side jobs and working overtime at work but I got a few pics today of some ---- that I ended up doing last week and this week.

Starting off with this nice blown LS swap I did

https://www.homemadeturbo.com/misc/ted/blownls.JPG

Ended up swapping in a B16a in the g2 integra. (oh and this is the 2nd engine job I did for this guy, remember guys change your oil) ;)

https://www.homemadeturbo.com/misc/ted/bentrod.JPG

Heres a GSR I'm working on, dude was using the NAWZ! and burnt up 4 valves and bent a rod, (remember guys the nawz is bad!)

https://www.homemadeturbo.com/misc/ted/cage1.JPG

Few pics of leia's cage/roll bar that we forget to take.

https://www.homemadeturbo.com/misc/ted/cage2.JPG

Most of the interior is still in, still need to put in the backseats. Oh and yesterday we got to make the test & tune event at Pacific raceways, first 2 passes leia made, 1 the charge pipe blew off, and the 2nd one the engine overheated and the tps fell off since the tps touches the firewall. I made the last run, @ 12psi I ran a 11.8 @ 119

https://www.homemadeturbo.com/misc/ted/hornet1.JPG

Here's a pic of me and ted's project for next spring. Hornet racing, its basically a stock 4 cylinder class of oval track & road racing. Its really a LOW budget type of racing, so we are just looking going into it for fun.

https://www.homemadeturbo.com/misc/ted/hornet2.JPG

little messy inside.

https://www.homemadeturbo.com/misc/ted/hornet3.JPG

the shell is a 91 Crx SI, got it for free.

https://www.homemadeturbo.com/misc/ted/teg11.JPG

a very very LOW budget GSR turbo setup ted is doing. I'll get a full write up in a couple days.

https://www.homemadeturbo.com/misc/ted/sbc1.JPG

Now onto the SBC project upgrade... Out with the Old Trailerpark 283

https://www.homemadeturbo.com/misc/ted/sbc9.JPG

Ted put his new turbo on without hooking the wastegate up before he pulled the engine. As you can see it blew the living ---- out of the air cleaner/bonnet box.

https://www.homemadeturbo.com/misc/ted/sbc2.JPG

the fresh SBC 350. Forged pistons 11.1 Dart heads, all new valve train. Blah blah, ted can tell you more about it.

https://www.homemadeturbo.com/misc/ted/sbc3.JPG

The old turbo setup modified with a external Tial 35mm gate

https://www.homemadeturbo.com/misc/ted/sbc6.JPG

Sporting teds new T04.

https://www.homemadeturbo.com/misc/ted/sbc4.JPG

Me working on the SBC

https://www.homemadeturbo.com/misc/ted/sbc5.JPG

New air cleaner lid welded on, and the new 350 installed.

https://www.homemadeturbo.com/misc/ted/sbc7.JPG

Nothing like breaking in a fresh cam on a v8 with open exhaust at 3am. HAHA, ted's neighbor came over and was like wTF?! ;D

https://www.homemadeturbo.com/misc/ted/burnoff2.JPG

"Hey Ted, I'm gonna go give mike a quick ride in your truck" LOL, of course I had to do a burnoff ;)

Is it fast? ehhh, I'll just say it needs more tuning and I think it is going to have alot more potential than the other engine. It's been really tricky trying not to get this thing to ping. 0 degrees base and 2.5 retard on the btm and ya... still pings in 3rd!

My crx, next week me and beau will be doing the Grassroots project on it and get it back on the road. Should be fun


Jeff

Re:Shit I've been working on... Pics
 

Yay For jeff...


:)

Re:Shit I've been working on... Pics
 

---- side jobs....just be a post ----- here on hmt

Re:Shit I've been working on... Pics
 

8)

Re:Shit I've been working on... Pics
 

Looks good, I like the HMT SBC setup. Also, you suck for getting a CRX shell for free :-\ But good luck with it all

Re:Shit I've been working on... Pics
 

cool

Re:Shit I've been working on... Pics
 

Haha, nice pics :)

Congrats on the 11.8 at 119!!!


LMAO,
https://www.homemadeturbo.com/misc/ted/burnoff2.JPG

Deff. front page material :)

Re:Shit I've been working on... Pics
 

i love how much room in the engine bay there is in those trucks

Re:Shit I've been working on... Pics
 

you always amaze me. good stuff 8)
nice pass on the hatch

Re:Shit I've been working on... Pics
 

Nice started to get a little woriied no pics in almost a month

Re:Shit I've been working on... Pics
 

i agree

https://www.homemadeturbo.com/

Re:Shit I've been working on... Pics
 

hey... thats my gsr! yea i was using the nawzzz yo! haha o well now ive gone another direction with a hmt'd crx...

Re:Shit I've been working on... Pics
 

heheh.

-PHiZ

Re:Shit I've been working on... Pics
 

wanna sell the heater controls out of that there black CRX?

Re:Shit I've been working on... Pics
 

no kidding...


and i love the SBC set-up! one day....one day....

Re:Shit I've been working on... Pics
 

cool picks, now it's time to ----- up the forum eh?

Re:Shit I've been working on... Pics
 

should really strip the ---- out of that crx...

Re:Shit I've been working on... Pics
 

Truck doing a burnout with with a dude hanging out the window.....Sure yall dont have a lil country in ya? If not want some? :-*



;D

Re:Shit I've been working on... Pics
 

^^^Are you asking them if they wanna ----????

Good to see people doing ---- just to do it.

Re:Shit I've been working on... Pics
 

How much boost are you running on the Chevy?

Re:Shit I've been working on... Pics
 

hey jeff whats up with this rumor i hear about kia giving u some money to make one of there cars fast?







"cough" "cough" turbo

Re:Shit I've been working on... Pics
 

i would serisouly like to see detail pictures of the turbo SBC. i have searched for the thread and found it, but the pictures didnt work anymore.

if anyone has pictures, i would like to see them.

Re:Shit I've been working on... Pics
 

Re:Shit I've been working on... Pics
 

heh, ya that rumor is true. They are still trying to find me the car to do it to. Its going to be a 04 spectra with a custom turbokit and a budget around 2500-3000 bucks. I'm really looking forward for it. :)

Re:Shit I've been working on... Pics
 

haha, a kia spectra, can't they just pull one off the lot for you to destroy? what size snail are you planning on using?

Re:Shit I've been working on... Pics
 

The guys from sparks racing, did a turbo Kia I believe. I'm guessing some kind of MAP clamp with FMU.
-PHiZ

http://honda-tech.com/zerothread?id=828814

Pics are down.

Re:Shit I've been working on... Pics
 

lol Jeff, that'll be pretty pimp. Good luck with it.

Re:Shit I've been working on... Pics
 

Just let me know an i got all the info an pics you are interested in.Most of those pics where on Draglab.
Yeah i hear my tires squalling from 10 blocks away while i was in my garage doing the gsr turbo kit.Got to get new trans cuz 3rd gear cant hold when boost comes in.Was Running 5 psi but borrowed Leah`s boost controller an we pumped it up to 10psi an it liked it.I am still dialing in the fuel,we jetted up the carb 4 sizes in the rear an 3 in the front an it still laying down @5200 an above.Gonna put the niagra jets back in an see where she goes from there.Think i need to get a vid of it doing a HUGE smokey burnout.Anyone interested?Think what a 520 cube cadillac engine will do with dual quads an twin CT26 turbos.Thats whats gonna replace the SBC.I beleive its gonna rock next year i hope

Re:Shit I've been working on... Pics
 

Re:Shit I've been working on... Pics
 

holy ----! that thing would be nuts.

and email some of those pictures to
lcplvest@yahoo.com really just the way you attached it to the exhaust mani, and how you did all of that work.

Re:Shit I've been working on... Pics
 

LMAO that was awsome we come back to the house and your like you guys did 2 burn outs! I could ------- hear you!!! ;D

Re:Shit I've been working on... Pics
 

nice cant wait for the low budget gsr setup

Re:Shit I've been working on... Pics
 

you are running 11.1 compression heads??? that is prolly why you are knocking so much.... especially when the boost hits.... why dont you try lowering the cr... or raising the octane level.... just a thought

Re:Shit I've been working on... Pics
 

do you realize who your talking too? ABAZ knows all... respect the man who made this place...

Re:Shit I've been working on... Pics
 

We wanted more power.Yes we know what were doing.I have like 5 engines sitting in my garage so if i blow one ill just swap in another.Just now getting the tunning part down so we will keep you posted on how well the high compression turbo setup runs.Dont worry dude i got the good fuel we will use for tunning.

Re:Shit I've been working on... Pics
 

Well you really must use the same fuel when tuning as when driving normally. Anything else is a potential liquid disaster.

Re:Shit I've been working on... Pics
 

wonder what you are thinking here? Disaster? You scared gonna blow it up?Hey i got to se what they can take before granading.
Think a bone stocker smogged 350 took 425 shot nawz before it let loose wonder if a mild built can take 15psi an 11-1 comp.Gonna fix the down pipe an put the wide band in it an see where the mixture is.Thanks for your concern but i got it handled.

Re:Shit I've been working on... Pics
 

;D This is whats inspires me on my turbo charged v8 setup.
He ran 16 psi on a bone stock small block an it last a long time.
http://www.hangar18fabrication.com/swtracing

Just a word to the wise look out for those lil chevy vegas sporting sbc LOL

Re:Shit I've been working on... Pics
 

I haven't seen a blow thru like that in years, most common on that setup is the fuel pressure can't keep up with the boost, most likely the problem here. You need a boost ref. fuel pump (if mechanical) or a boost ref. regulator with a pump that can put out at least 7psi over what your max boost will be. Also any ref line needs to come from the top of the carb to get accurate boost reference.

Re:Shit I've been working on... Pics
 

ur preaching to the choir ;)