HomemadeTurbo - DIY Turbo Forum - Shit I've been working on... Pics

Been doing lots of side jobs and working overtime at work but I got a few pics today of some ---- that I ended up doing last week and this week.

Starting off with this nice blown LS swap I did

https://www.homemadeturbo.com/misc/ted/blownls.JPG

Ended up swapping in a B16a in the g2 integra. (oh and this is the 2nd engine job I did for this guy, remember guys change your oil) ;)

https://www.homemadeturbo.com/misc/ted/bentrod.JPG

Heres a GSR I'm working on, dude was using the NAWZ! and burnt up 4 valves and bent a rod, (remember guys the nawz is bad!)

https://www.homemadeturbo.com/misc/ted/cage1.JPG

Few pics of leia's cage/roll bar that we forget to take.

https://www.homemadeturbo.com/misc/ted/cage2.JPG

Most of the interior is still in, still need to put in the backseats. Oh and yesterday we got to make the test & tune event at Pacific raceways, first 2 passes leia made, 1 the charge pipe blew off, and the 2nd one the engine overheated and the tps fell off since the tps touches the firewall. I made the last run, @ 12psi I ran a 11.8 @ 119

https://www.homemadeturbo.com/misc/ted/hornet1.JPG

Here's a pic of me and ted's project for next spring. Hornet racing, its basically a stock 4 cylinder class of oval track & road racing. Its really a LOW budget type of racing, so we are just looking going into it for fun.

https://www.homemadeturbo.com/misc/ted/hornet2.JPG

little messy inside.

https://www.homemadeturbo.com/misc/ted/hornet3.JPG

the shell is a 91 Crx SI, got it for free.

https://www.homemadeturbo.com/misc/ted/teg11.JPG

a very very LOW budget GSR turbo setup ted is doing. I'll get a full write up in a couple days.

https://www.homemadeturbo.com/misc/ted/sbc1.JPG

Now onto the SBC project upgrade... Out with the Old Trailerpark 283

https://www.homemadeturbo.com/misc/ted/sbc9.JPG

Ted put his new turbo on without hooking the wastegate up before he pulled the engine. As you can see it blew the living ---- out of the air cleaner/bonnet box.

https://www.homemadeturbo.com/misc/ted/sbc2.JPG

the fresh SBC 350. Forged pistons 11.1 Dart heads, all new valve train. Blah blah, ted can tell you more about it.

https://www.homemadeturbo.com/misc/ted/sbc3.JPG

The old turbo setup modified with a external Tial 35mm gate

https://www.homemadeturbo.com/misc/ted/sbc6.JPG

Sporting teds new T04.

https://www.homemadeturbo.com/misc/ted/sbc4.JPG

Me working on the SBC

https://www.homemadeturbo.com/misc/ted/sbc5.JPG

New air cleaner lid welded on, and the new 350 installed.

https://www.homemadeturbo.com/misc/ted/sbc7.JPG

Nothing like breaking in a fresh cam on a v8 with open exhaust at 3am. HAHA, ted's neighbor came over and was like wTF?! ;D

https://www.homemadeturbo.com/misc/ted/burnoff2.JPG

"Hey Ted, I'm gonna go give mike a quick ride in your truck" LOL, of course I had to do a burnoff ;)

Is it fast? ehhh, I'll just say it needs more tuning and I think it is going to have alot more potential than the other engine. It's been really tricky trying not to get this thing to ping. 0 degrees base and 2.5 retard on the btm and ya... still pings in 3rd!

My crx, next week me and beau will be doing the Grassroots project on it and get it back on the road. Should be fun

Jeff