HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Sell out... My little Rant (https://www.homemadeturbo.com/general-discussion-6/sell-out-my-little-rant-6860/)

HMT-Admin 06-30-2003 11:42 PM

Sell out... My little Rant
 
Well, alot of you may know I do have a race car, with a built engine and such.. And I have been putting it off and off, for this entire year. I no longer can afford it. Bills are stacking up and I need to liquidate my go fast parts. I have no desire to have a drag race car, my street car is more than adequate for my needs. Drag racing has never been a big deal to me anyways, anyone can drive in a straight line, anyone can build a 10 sec car... that ---- is no brainier stuff. The only thing that I was trying to prove, was that I could do a 10 sec car, with a 10 grand budget and still be D-series. Which I probably could, but I know how I act.. and lets say I got it done, It would probably be fine for a season, then something would blow up, tranny take a ----, break some axles.. Something, then I would get really pissed off because the lack of tuning with zdyne and upgrade to AEM, then.. spend more and more money on the chassis, then what would I have? a big empty pocket. So I honestly don’t think I would ever stop spending money on it. I look at Nick, and the guy cannot stop spending money on his car... I look at beau, and he is just in the early stages of this process, but he will end up just like him... Money money money, car parts car parts etc etc.. I'm ------- selling out! I'm going to take a fatty loss, I don’t care... Time for change 8)

So whats on the market?!...

ZC Engine 1.6l DOHC (fully rebuilt)
Port & Polish Head w/ fresh 3way valve grind
Crower Cams (custom spec 20 D Dura/lift)
Endyn Roller Wave Pistons/Rings/Pins 9.5 {c/r}
Crower I-Beam Rods
Factory Ported ZC intake manifold (no TB or Fuel setup)
Posting/Block Support by Endyn
Machine Work Block Decked/Bored/Tanked
Block O-Ringed (With Steel Rings)
SCE Copper Head Gasket
STR Cam Gears
New Tbelt/Waterpump/Oil pump
Factory Bearnings & Seals
Magnacore 8mm Spark Plug Wires
ARP Stud Kit
ZC Distributor/Alternator also come with it..
https://www.homemadeturbo.com/tech_p...ne-paint_P.jpg

I have well over 3 grand in this engine. If I get $2000 out of it I'll be happy. The engine has only break in miles on it roughly 500 miles, and 5 1/4 mile passes at low boost.

https://www.homemadeturbo.com/tech_p..._ZC/index.html

Now the stuff that I am selling separately...

ZC Tranny w/ Welded Diff & ZC intermediate shaft $150
MSD 6BTM w/ MSD Coil $225
Homemade Saab Air-water IC w/ 3.3gpm Inline Pump $200
Missing Link Bypass (92+ civic) $40
1 gallon Fuel Cell $75
Custom ZC intake manifold/ 78mm GMC tbody $350
60-1 T4 turbo (35 passes) $500
Equal length Race T4 (D-series/ZC) manifold w/ Downpipe $500
25.8x13 M&H Slicks on Lenso 13 white Drag wheels (5 passes) $500
5in Monster (aluminum) tach w/ shift lt $50

I have more ---- later, I highly doubt anybody here will buy this stuff, I'm going to try most of the local boards and do everything else Ebay :)

btw, all prices are negotiable, and I'm even considering just tearing apart the ZC and selling it piece by piece.



Jeff Frank

Xgenturbo 06-30-2003 11:47 PM

Re:Sell out... My little Rant
 
how much do you want for just the block and head with intake manifold?

HMT-Admin 06-30-2003 11:51 PM

Re:Sell out... My little Rant
 
The block alone has about 1000 bucks in it.. Not including parts,

I'd like to get 2000 grand, for a long block, and maybe if I'm nice I'll throw in some ---- ;)

Remeber dont low ball the admin, he might get pissed :-X

Dr.Boost 07-01-2003 12:03 AM

Re:Sell out... My little Rant
 
Sorry to hear you go. I know what you mean though. I have been trying to cut back ever since I started, but it's addicting. I can't stop spending money on something that will never pay itself off. I know it's a waist of money and I still do it. ::) I guess I don't have a lot of other hobbies so I decided to wasit all my money on this.


With that out of the way, to bad that clutch won't fit my tranny. :'( What else ya got? ;D
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

BLACKSI 07-01-2003 12:08 AM

Re:Sell out... My little Rant
 
its a shame :(

Beau

OnYx 07-01-2003 12:12 AM

Re:Sell out... My little Rant
 

Originally Posted by BLACKSI
its a shame :(

Beau

Yes it is. If i had the cash ATM i woud buy the entire car.

JHill 07-01-2003 12:46 AM

Re:Sell out... My little Rant
 
Jeff, I can completely relate to this, as you know...

There is no end in sight in the quest for 1/4 mile times and speed. The technology in this area also moves at a pace that no wallet can keep up with hardly. Once you get to where you wanted to be, its already Old School. :(

I am certain you will have fun in motorsports, perhaps in a different way though.

Jim

shortyz 07-01-2003 01:11 AM

Re:Sell out... My little Rant
 
yeah hobbies always get boring man, especially when you work on cars all day long..

are you just getting outta honda's or outta anything to do with cars? sorry to hear that.

hope u get some money for the ZC cause i know thats a badass built motor.

quickcrx702 07-01-2003 01:11 AM

Re:Sell out... My little Rant
 
first of all, you aren't selling out. you still have another crx. selling out would be getting an suv and talking ---- about racers. anyways, you are just realizing that hitting 10's isn't as important as other things in life(eating, having a place to sleep, etc.). also, i am sure that your stuff will sell quickly. i know i must have read a bunch of post like "i have five thousand bucks can somebody tell me what to spend it on." ----... if i had the money i would buy your stuff. maybe if you sell the whole car on ebay somebody might buy it for a lot of money. well...good luck. also, keep HMT alive! peace

Todd 07-01-2003 01:12 AM

Re:Sell out... My little Rant
 
I know someone who WANTS that engine... dunno what his timeframe on money is, though.

I get back to Asheville the 4th, and get drunk at his house that night... I'll let you know.

- Joseph


All times are GMT -5. The time now is 03:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands