|
roll call for BOTI Seattle?!?!? check in y0!
Battle of the Imports Event Info
WHERE PACIFIC RACEWAYS 31001 144th AVE. SE KENT, WA 98042 WHEN FRIDAY NIGHT AUGUST 31, 2007 FRIDAY, AUGUST 31ST (Schedule Subject to Change w/o Notice) Vendor Setup 12:00 PM Gates Open 12:00 PM Racer Tech Inspection 2:00 PM Car Show Roll In 2:00 AM Shakedown Runs (All Classes) 4:00 PM Qualifying (All Classes) 5:00 PM, 6:30 PM Car Show Judging 8:00 PM 1st Round Eliminations (Pro and Street) 8:00 PM Finestmodels.com Swimsuit Competition 9:00 PM Awards Presentation Conclusion EVENT PRICING Adult General Admission $20.00 Adult Crew Member $20.00 Children (7-11) $10.00 Kids (6-Younger) FREE Race Entry (Car & Driver) $40.00 Carshow Entry (Car & Driver) $40.00 Fun Run (Car & Driver) $40.00 DIRECTIONS From I-5: In Federal Way take the SR 18 East exit (exit 142) toward Auburn. Go 8.9 miles and take the exit for SE 304th/SE 312th (a sign about 1/4 mile before the exit will also identify it as Green River Community College/Pacific Raceways). At the end of the exit ramp, turn left; at the next opportunity, turn right. Proceed on the track access road. From SR-167: Take the SR 18 East exit toward Auburn. Go 6.2 miles and take the exit for SE 304th/SE 312th (a sign about 1/4 mile before the exit will also identify it as Green River Community College/Pacific Raceways). At the end of the exit ramp, turn left; at the next opportunity, turn right. Proceed on the track access road. From I-405: From Northbound I-405 take Exit #2 in Renton for southbound SR 167 From Southbound I-405 take Exit #2B in Renton for southbound SR 167. Then follow the directions above for SR 167. so, whos going? we want to meet up somewhere and roll down? right now i know me and one of my buddies are gonna roll down together. havent heard back from anyone else yet... thinking we should meet up earlier than later so we dont get fucked hardcore by some seattle/south end traffic... also, make your predictions of what your gonna run... im gonna run 12s on street tires |
Re: roll call for BOTI Seattle?!?!? check in y0!
Stickman and I are gona go...... where are we gona meet up at? O0 Im predicting that I will run a camera.... lol
|
Re: roll call for BOTI Seattle?!?!? check in y0!
I'll be there.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Not sure if I can run :8 But I'll be there!
|
Re: roll call for BOTI Seattle?!?!? check in y0!
ill be their. Dustin has dibs on my helmet. I have a set of slicks someone can barrow, but ull need wheel studs/spacers 24.5/9/13. someone sneek in a cooler/beer :6
|
Re: roll call for BOTI Seattle?!?!? check in y0!
word on the streets is that "toolers" will be on the grounds... :y
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by turbohf
word on the streets is that "toolers" will be on the grounds... :y
i need slicks.. on 4x114.... ----!!! |
Re: roll call for BOTI Seattle?!?!? check in y0!
Ill be there.
We need to make sure the 'tool box' cooler makes it too. |
Re: roll call for BOTI Seattle?!?!? check in y0!
will be there also
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by leed
Ill be there.
We need to make sure the 'tool box' cooler makes it too. |
Re: roll call for BOTI Seattle?!?!? check in y0!
oh ----...i need an HMT sticker for my car, it doesnt have one :-\
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by turbohf
oh ----...i need an HMT sticker for my car, it doesnt have one :-\
|
Re: roll call for BOTI Seattle?!?!? check in y0!
:-( no wheels yet for me.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by Random Hero
:-( no wheels yet for me.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
i will be there watching...a bunch of us idaho guys are coming over...a 9second dsm looking to break 8's, an 8 second supra, a couple 10 second supras, a 10 second EK hatch, an 11 second nissan....just to name a few...i think there is going to be around 10 cars and 25 guys or so heading over...cant wait should be good times!
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by 88dx
what do you need?
|
Re: roll call for BOTI Seattle?!?!? check in y0!
I'll be there if I can get tuned and pass tech I will run other than that I will for sure have plenty of beer
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Ill be there to watch the fellow hmter's attempt to run the ---- out of their honda's.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
---- i might be getting fucked over and not get the day off... :7
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by turbohf
---- i might be getting fucked over and not get the day off... :7
|
Re: roll call for BOTI Seattle?!?!? check in y0!
They should hold a DSIN, domestics smoke imports night.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by crxtuner
my work tried to jew me over as well and i told them to ---- off.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by turbohf
yeah we will see how things go today, i just might do that... Pacific Raceways blows ass and doesnt have many events or test n tunes scheduled. so its really just about the last day to race, might see if i can get down to the TNT weds too...
After tuning, ill prob go out htere and shake it down on street tires... sweet high 12s at 130... lol |
Re: roll call for BOTI Seattle?!?!? check in y0!
welp, friend is loaning me some new 22x8x15 MT slicks....
O0 |
Re: roll call for BOTI Seattle?!?!? check in y0!
well me and Dave had fun :l
anyway, we live to fight another day... might, but probably wont go to TNT. didnt get a chance to pick up the DRs, if i get them on wed i will have to drive from everett at 6pm.. traffic should be pretty fucked all the way to Pacific :y or i roll down on strait up street tires (at around 4:30 from edmonds), torqueless B16 might handle that ok... :-\ might be the same deal for BOTI, leaving edmonds at 4:30...on a friday... should be fun with no exhaust in some of the shittiest traffic in the country :P |
Re: roll call for BOTI Seattle?!?!? check in y0!
W/ the exception of Dustin's timing belt shredding on the dyno Id say it turned out pretty good. >:D
Show me another engine that can roll into only 95ft-lbs of TQ down low, but pull the big boy #'s on pump gas. :y |
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by leed
W/ the exception of Dustin's timing belt shredding on the dyno Id say it turned out pretty good. >:D
Show me another engine that can roll into only 95ft-lbs of TQ down low, but pull the big boy #'s on pump gas. :y http://home.comcast.net/~turbohf/timing1.JPG :'( :-\ :3 :7 :-[ ??? >:( then i got RETAILED at NW Honda :7 |
Re: roll call for BOTI Seattle?!?!? check in y0!
ill be there with losesomethinbrah.
|
Re: roll call for BOTI Seattle?!?!? check in y0!
So far I dont have any wheels... I have slicks, just no wheels... so it looks like i might not make it this year :-/
i need some 15x8 4x100 wheels asap. perferable 0 offset. |
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by Random Hero
So far I dont have any wheels... I have slicks, just no wheels... so it looks like i might not make it this year :-/
i need some 15x8 4x100 wheels asap. perferable 0 offset. |
Re: roll call for BOTI Seattle?!?!? check in y0!
whats the offset?
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Jesus Josh, wait till the last minute maybe? hahaha
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by Random Hero
whats the offset?
|
Re: roll call for BOTI Seattle?!?!? check in y0!
I think it will hit with the 9 inch wide slick....
|
Re: roll call for BOTI Seattle?!?!? check in y0!
http://seattle.craigslist.org/tac/pts/406875891.html
Some drag radial 16X7's for 80 bucks if anyones looking for some. |
Re: roll call for BOTI Seattle?!?!? check in y0!
Well... My POS is alive.. It ran tonight... Didnt drive it due to the ------- queer ass water tube leaking at the thermo housing... Once again... good oil pressure, idling right around 900-950... 13.8 afrs at idle. Let it run and get warm. Thing sounds really good.... See ya in the morning Dave..... All she needs is to have the coolant topped off, we caked the ther housing side of the tube with hondabond... lettin it dry overnight, and ill probably thropw a can of bars leaks in just for good measure.
I have lots of picvtures, hbut they are on a camera i dont have the docking thing to, and I dont have a card reader... Ill get them up tomorrow after i get my camera back. Still debating running it so soon... after last time im thinking id like to put some miles on it.. LOVE the twin disk ringy rattle.. LOL. See you guys out there... |
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by turbohf
611miles....4 dyno pulls... and at 8800rpms :S
http://home.comcast.net/~turbohf/timing1.JPG :'( :-\ :3 :7 :-[ ??? >:( then i got RETAILED at NW Honda :7 |
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by bigdaddyvtec
Well... My POS is alive.. It ran tonight... Didnt drive it due to the ------- queer ass water tube leaking at the thermo housing... Once again... good oil pressure, idling right around 900-950... 13.8 afrs at idle. Let it run and get warm. Thing sounds really good.... See ya in the morning Dave..... All she needs is to have the coolant topped off, we caked the ther housing side of the tube with hondabond... lettin it dry overnight, and ill probably thropw a can of bars leaks in just for good measure.
I have lots of picvtures, hbut they are on a camera i dont have the docking thing to, and I dont have a card reader... Ill get them up tomorrow after i get my camera back. Still debating running it so soon... after last time im thinking id like to put some miles on it.. LOVE the twin disk ringy rattle.. LOL. See you guys out there... |
Re: roll call for BOTI Seattle?!?!? check in y0!
less than 650miles on mine... been to the dyno and im ------ ready...leaving to get tires right now :)
|
Re: roll call for BOTI Seattle?!?!? check in y0!
Originally Posted by turbohf
less than 650miles on mine... been to the dyno and im ------ ready...leaving to get tires right now :)
|
| All times are GMT -5. The time now is 08:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands