Rev limiter

Reply Subscribe

Thread Tools

Search this Thread

12-17-2003, 01:36 PM

#11

projekteg

3.0 BAR

Join Date: Apr 2003

Posts: 11,058

Re:Rev limiter

Quote:

Originally Posted by crx88Si

check the codes.. can't hurt, then reset ecu.

Reset ecu: In the engine fuse box pull the fuse labelled hazard to 15-20 sec. Re-insert fuse, and voila! ecu is reset.

right, just check your codes, and fix whatever it tells you is the problem, then reset the ecu. do you know how to check your engine codes to see what cel it is throwing??

12-17-2003, 01:52 PM

#12

2genCRX

1.0 BAR

Thread Starter

Join Date: May 2003

Posts: 339

Re:Rev limiter

Yeah, I know ho to check for engine codes, got the list and everything.

12-17-2003, 01:59 PM

#13

projekteg

3.0 BAR

Join Date: Apr 2003

Posts: 11,058

Re:Rev limiter

well do that and tell us what you get.......

12-17-2003, 02:17 PM

#14

turboDXcoupe

1.5 BAR

Join Date: Mar 2003

Posts: 1,134

Re:Rev limiter

for those of us that dont how do you chek?

12-17-2003, 02:21 PM

#15

projekteg

3.0 BAR

Join Date: Apr 2003

Posts: 11,058

Re:Rev limiter

Quote:

Originally Posted by turboDXcoupe

for those of us that dont how do you chek?

holy ----, it's been posted a million times :P, look in the tech section under any topic that has to do with "CEL", all you do is use a jumper wire (paper clip), to jump the 2 prong "service wire" behind the passenger side kick panel, then you turn you ignition "on" and read the codes, this is a brief "how to", but you can find step by step detailed instructions in the tech section.......

12-17-2003, 02:58 PM

#16

Turbo90Accord4DR

Guest

Posts: n/a

Re:Rev limiter

most likley its because you have the HF engine, and those ******* are 8 vavle pos's, so its not reving high because of its inafficiency (i can spell) i had an 88 hf with a a6 ecu. bwhahahahahah peice of should wouldnt rev over 5800

12-17-2003, 03:04 PM

#17

turboboy

Guest

Posts: n/a

Re:Rev limiter

he doesnt have the hf engine

12-17-2003, 04:14 PM

#18

2genCRX

1.0 BAR

Thread Starter

Join Date: May 2003

Posts: 339

Re:Rev limiter

Yeah what he said, I have a JDM D15b 16 valve.

12-17-2003, 04:42 PM

#19

Honda16hb

3.0 BAR

Join Date: Jan 2003

Posts: 7,082

Re:Rev limiter

is your pr4 obd1 or 0, if it's 0 (for those who don't know) a light inside will flash the number of the problem code, very simple.

12-17-2003, 04:51 PM

#20

HMT-Admin

Administrator

Join Date: Dec 2002

Posts: 13,991

Re:Rev limiter

Try swapping the distributor.. more than likly the problem. Your Crank positon sensor is in their, and if it isnt reading right, you will get a low rev limit. The Cylinder sensor looses its output to the ECU, and it just cuts out. I've never heard of limp mode on a OBD0/1 car not letting you rev past a certain amount.

Reply Share

First
Prev
2 / 5
Next
Last