HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   ram horn manifold installed (dyno update) (https://www.homemadeturbo.com/general-discussion-6/ram-horn-manifold-installed-dyno-update-35062/)

98ctr 02-14-2005 10:01 AM

ram horn manifold installed (dyno update)
 
well some of you might have seen the new manifold I was making for the new set up im going to run this year. here is a link to it.
http://www.draglab.com/fr/index.php?...threadid=35375

and now for the update, the swap got done a few days ago, I still need to tune the set up.

there are a few changes that im hoping it will improve the set up. we will see when ill get it tuned. here are a few new pics to hold you guys over untill after the tune.

http://memimage.cardomain.net/member...2_144_full.jpg

I spend a whole day cleaning the eng bay, I wanted to get it as clean as posible

http://memimage.cardomain.net/member...2_146_full.jpg

ACT 12lbs flywheel

http://memimage.cardomain.net/member...2_147_full.jpg

ACT clutch with 6 puck disk

http://memimage.cardomain.net/member...2_148_full.jpg

http://memimage.cardomain.net/member...2_149_full.jpg

http://memimage.cardomain.net/member...2_152_full.jpg

http://memimage.cardomain.net/member...2_150_full.jpg

http://memimage.cardomain.net/member...2_151_full.jpg

And now for the finish product. ;D

http://memimage.cardomain.net/member...2_145_full.jpg

and now the dyno update

http://memimage.cardomain.net/member...2_153_full.jpg

AgentMurdoc 02-14-2005 10:04 AM

Re:ram horn manifold installed
 
that ---- looks like ass, I'll take it off your hands for free! ;D


looks good though man! :)

SkunT 02-14-2005 10:24 AM

Re:ram horn manifold installed
 
I had to look for the intake mani. :P



looks good though! any more specs...

beerbongskickass 02-14-2005 10:25 AM

Re:ram horn manifold installed
 
Looks good. :) You sure do like red. ;D

Spenser 02-14-2005 10:27 AM

Re:ram horn manifold installed
 
lol, that looks ------- fast man. Although it does look like your smeared ketchup all over everything. ;)

98ctr 02-14-2005 11:29 AM

Re:ram horn manifold installed
 

Originally Posted by junkyard racer
looks good though! any more specs...

same set up as before except the turbo, turbo mani and new intercooler.


Originally Posted by beerbongskickass
Looks good. :) You sure do like red. ;D

Me like red alot. :P I think it looks good with white especially. And since my charge piping was allready painted red, I thought I would add a bit more. :o ;D

D16Y7-T 02-14-2005 11:33 AM

Re:ram horn manifold installed
 
Nice man, that is crazy clean!

It has the cool gold color, just like that manifold on Ebay, once you start it and drive it for an hour it turns that cool gold color. ::)

BoosTedZSix 02-14-2005 11:35 AM

Re:ram horn manifold installed
 
what happened to the purple hatch? looks good ;)

ibassez 02-14-2005 11:59 AM

Re:ram horn manifold installed
 
looks really really clean

HMTguy 02-14-2005 12:02 PM

Re:ram horn manifold installed
 
Mmmmm pretty. What are those orange things by your strut bar? Gloves?

Masta 02-14-2005 12:02 PM

Re:ram horn manifold installed
 
Sweetness, I like red too. Looks great, should be damn fast!

D.

SkunT 02-14-2005 12:02 PM

Re:ram horn manifold installed
 

Originally Posted by ibassez
looks really really clean

i would hope, he said he spent a full day cleaning it! :P

rollmodel 02-14-2005 12:13 PM

Re:ram horn manifold installed
 
what.. no pvc or flex pipe charge piping.. it almost brings a tear to my eye. ;)

looks pretty nice..



the cleanest my engine will get is with a garden hose... :'(

Jeter2Karaffa 02-14-2005 12:44 PM

Re:ram horn manifold installed
 
it looks really good man. nice work on it

98ctr 02-14-2005 01:06 PM

Re:ram horn manifold installed
 

Originally Posted by BoosTedZSix
what happened to the purple hatch? looks good ;)

The purple hatch got sold. But I keept my motor and all my set up. he he. ;D

whiterice 02-14-2005 01:11 PM

Re:ram horn manifold installed
 
It looks to me that the timing belt is red?

98ctr 02-14-2005 01:14 PM

Re:ram horn manifold installed
 

Originally Posted by whiterice
It looks to me that the timing belt is red?

it is :)

alfaaay 02-14-2005 04:27 PM

Re:ram horn manifold installed
 
Clean engine bay you got there! Did you do a wire tuck on it? Looks a lot less messy than normal

98ctr 02-14-2005 08:26 PM

Re:ram horn manifold installed
 
yes I did tuck the wire harneses lower and away from view. ill post more pics later, but now im going to take my lady out for Valentines.

Dr.Boost 02-14-2005 10:22 PM

Re:ram horn manifold installed
 

Originally Posted by 98ctr

Originally Posted by whiterice
It looks to me that the timing belt is red?

it is :)


Tweeker. :P Looks nice. That's the manifold you made, right? Looks very nice. :)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

djfob 02-15-2005 01:30 AM

Re:ram horn manifold installed (now with update)
 
that setup looks mint with the huge snail 8)

BLUEHATCH 02-15-2005 02:36 AM

Re:ram horn manifold installed (now with update)
 
That ---- looks pipm, man... very clean... i like that mani

hotrex 02-15-2005 06:21 AM

Re:ram horn manifold installed (now with update)
 
stock block? i dont remember

BLUEHATCH 02-15-2005 12:02 PM

Re:ram horn manifold installed (now with update)
 
^^^ i don't think so... i don't think you could put down 400hp on a stock block

98ctr 02-15-2005 01:20 PM

Re:ram horn manifold installed (now with update)
 
stock gsr block sleaves. 81.5 mm pistons at 9.2 cr, eagle rods and honda bearings.

Dr.Boost 02-15-2005 06:10 PM

Re:ram horn manifold installed (now with update)
 

Originally Posted by BLUEHATCH
^^^ i don't think so... i don't think you could put down 400hp on a stock block

Did you miss the dyno thread?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

98ctr 02-15-2005 09:50 PM

Re:ram horn manifold installed (now with update)
 
ok biatches, I just got back from tunning the car. ;D

453.4 whp & 281.7 wtq


BLUEHATCH 02-15-2005 09:52 PM

Re:ram horn manifold installed (now with update)
 

Quote from: BLUEHATCH on Today at 10:02:25am
^^^ i don't think so... i don't think you could put down 400hp on a stock block



Did you miss the dyno thread?


---- i must have... 8)

FooK 02-15-2005 09:58 PM

Re:ram horn manifold installed (now with update)
 
nice work stefan, laying it down as usual.

98ctr 02-15-2005 10:32 PM

Re:ram horn manifold installed (dyno update)
 
thanks guys, I worked hard for this one. And I am verry happy with the results. O ya, and that 453 whp was SAE corrected. ;D

djfob 02-15-2005 10:44 PM

Re:ram horn manifold installed (now with update)
 

Originally Posted by 98ctr
ok biatches, I just got back from tunning the car. ;D

453.4 whp & 281.7 wtq


very impressive.....congrats man

Jeter2Karaffa 02-16-2005 01:07 PM

Re:ram horn manifold installed (dyno update)
 
definatly some impressive numbers! good job man

98ctr 02-16-2005 01:07 PM

Re:ram horn manifold installed (dyno update)
 
thanks. that was at 15psi boost. 98ctr

BoosTedZSix 02-16-2005 01:15 PM

Re:ram horn manifold installed (dyno update)
 
a/f ratio looks a bit lean in a few places. but nice number's nonetheless

projekteg 02-16-2005 01:22 PM

Re:ram horn manifold installed (dyno update)
 

ketchup and mayonaise ???


http://memimage.cardomain.net/member...2_145_full.jpg



nice numbers ;)

leed 02-16-2005 01:37 PM

Re:ram horn manifold installed (dyno update)
 
Holy crap! Super sexy tq curve
Nice work man, Im jealous. :)

W O T 02-16-2005 01:48 PM

Re:ram horn manifold installed (dyno update)
 
Look a that ------- power band, smooth as butter

You got balls for running with no timing cover

HMT-Admin 02-16-2005 03:19 PM

Re:ram horn manifold installed (dyno update)
 
haha.. must be all that headwork ;)

nice work stefan



98ctr 02-16-2005 05:26 PM

Re:ram horn manifold installed (dyno update)
 

Originally Posted by BoosTedZSix
a/f ratio looks a bit lean in a few places. but nice number's nonetheless

the a/f ratio its about 12.5 for the most part. the dyno o2 sensor is the sniffer type so it will read leaner than what the acctual car runs, because it has to go through a filter and a bunch of hoses.

so the rear a/f ratio its about high 11 to low 12 a/f.

98ctr 02-16-2005 05:28 PM

Re:ram horn manifold installed (dyno update)
 

Originally Posted by AbaZ
haha.. must be all that headwork ;)

nice work stefan

shhhhh don't tell anyone. lol. thanks Jeff. we gots to go racing one of these days, so we can practice. :D


All times are GMT -5. The time now is 01:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands