Radiator Shops, How extensive of modifications?
 

Well my car is just about done, one thing that didn't pan out as i would have liked, i have a aluminum dual core radiator in the crx.
Can a radiator shop cut 2 inches off of the drivers side of it and 2 inches off the top then reweld it? How much would something like that cost?

Re: Radiator Shops, How extensive of modifications?
 

2 inches off of the drivers side to clear my downpipe and 2 inches off the top so i can tuck it under the T bar

Re: Radiator Shops, How extensive of modifications?
 

you might be able to get away with cutting down the width but not the height. if you look at the rad core, and visualize what youd be cutting off you would understand why it isnt possible.

Re: Radiator Shops, How extensive of modifications?
 

is this a EG radiator? and like corey said u can cut the height.

Re: Radiator Shops, How extensive of modifications?
 

just lean the hell out of it and make it fit...

Re: Radiator Shops, How extensive of modifications?
 

do the custom rad hit............... plywood and a hammer. Give that ---- a diet

Re: Radiator Shops, How extensive of modifications?
 

Ron Davis radiators will custom build one to your specs. All tig welded, nice stuff. Pretty cheap as well. My buddy got one for his SR20DET swapped 510 ratsun.

Re: Radiator Shops, How extensive of modifications?
 

I don't understand why they can't cut the top down. Yea it is a EG all aluminum radiator.

Re: Radiator Shops, How extensive of modifications?
 

get a nice crosssmember and a little lean to fit that. way better to spend $$ on a decent crossmember than a radiator

Re: Radiator Shops, How extensive of modifications?
 

Am rocking a jk motorsports cross member rite now with the 2nd gen heim's and lca connectors. It still sits two inches high and needs about 2 inches cut off driver's side.