HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   pics of my b16 crx (https://www.homemadeturbo.com/general-discussion-6/pics-my-b16-crx-42120/)

bob06 07-03-2005 01:09 PM

pics of my b16 crx
 
I know they aren't rare and this one is no where near the cleanest but her are some pics anyway.
This is the car. It was kind of an impulse "I'm bored let's go take some pictures of the car," so i just pulled it out in the street.
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
Pic of the swap. Did all the wiring myself after someone else messed it up.
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
Hardcore fender damage from a front end collision before i got the car. Front end is all fuct up so to compensate for the gap between the headlights and corners, i push the fenders all the way back. The door hits it and crushes it in but i'm too lazy to fix it.
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
headlight/cornerlight gap... result of front end crash
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
I always have been more of an assman myself and i love the way these cars look from the back
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
Hasport mounts own. My motor doesn't move at all yet i don't get a shitload of vibration in the car either. The motor dropped right in. We didn't have to wiggle it or anything. It fit PERFECT.
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
My alternator went bad about a week after i got the swap in and i didn't have the $110 to shell out for a new alternator so a friend gave me an old d series he had layin around and i ghetto rigged it. It's the d series bracked bolted to the b series and then the alternator is bolted the b series. I had to shave the alternator where the screw goes and buy a slightly longer belt but it works perfectly.
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
I also modified my stock clutch cable to work to save money instead of buying an integra one. all you do is pull the adjuster back, cut off about 8 of those coils with a hack saw, put the adjuster back, adjust the cable and your done. It took me about 20 minutes.

warric_k 07-03-2005 01:17 PM

Re: pics of my b16 crx
 
haha, your car is wicked. it's more ghetto rigged than any of mine have been. love it.

daubleaaron 07-03-2005 01:26 PM

Re: pics of my b16 crx
 
Im loving it! that ---- is totally my style. IM fighting the old fender crush with my door right now. good ---- man

96dx 07-03-2005 05:04 PM

Re: pics of my b16 crx
 
both my fenders are like that in my crx..just not as bad..scares the ---- outta the GF all the time when she opens or closes the door...

FooK 07-03-2005 05:06 PM

Re: pics of my b16 crx
 
hood optional...lol

bob06 07-03-2005 05:23 PM

Re: pics of my b16 crx
 
Yeah I've been rockin no hood for the past couple days. Background: one of the holes in the hood is striped so i drilled it through and zip-tied it. Story: While fixing my clutch cable, a friend leaned on the hood and broke the zip-ties so i said ---- it, just take the bitch off. I'm also runnin an integra axle on the passenger side and whatever axle came with the swap on the drivers side, coilovers in the front, but not in the back, and no sunroof. I have a piece of plexi cut but it is so damn hot here that i am procrastinating putting it in cause i don't wanna kill my airflow.

NBLKID 07-03-2005 05:36 PM

Re: pics of my b16 crx
 

Originally Posted by daubleaaron
Im loving it! that ---- is totally my style. IM fighting the old fender crush with my door right now. good ---- man


Darkelvis 07-03-2005 06:31 PM

Re: pics of my b16 crx
 
Well, that car fits in perfectly here at HMT.


All times are GMT -5. The time now is 03:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands