Re: Picked up my motor today, a few pics
Dirty fuckers. Heh. Your 4 door is gona rock!
|
Re: Picked up my motor today, a few pics
lol, i was talken to henry on the internet when u were on your way, and he was like, i have to get my ---- ready for somone to pick my motor up lol, i was like k, didnt kno it was you thow, how long did it take to pull?
|
Re: Picked up my motor today, a few pics
Took like an hour and a half to 2 hours. We were stuck for almost half an hour on one of the axle nuts. After that though it went pretty smooth.
|
Re: Picked up my motor today, a few pics
The clutches from stealthmode, LSDmotorsports come with a new pilot bearing and throw-out bearing and install tool thing.
Otherwise you could go to Vatozone and get one. Is that a 96 Accord Wagon your rockn' there? My dad has one. |
Re: Picked up my motor today, a few pics
lol all your perfectly fine clothes are fucked.
|
Re: Picked up my motor today, a few pics
Yea man, Nice Valve Cover ;), remind me of jeffs b16.
Anyways all of the clutch kits come with pilot and throwout bearings. If you need a separate one for something else, we have them available on the site as well. http://www.lsdmotorsports.com/drivetrain.aspx |
Re: Picked up my motor today, a few pics
sweet. whats done to the motor?
|
Re: Picked up my motor today, a few pics
The car is a 97 Subaru Impreza wagon. Those were my dirty clothes already :P
Hmm thinking about getting the 6 puck unsprung clutch, I have just never driven one before and don't know if it's gonna be a pain to drive for a daily driver. |
Re: Picked up my motor today, a few pics
Originally Posted by jagojon3
The car is a 97 Subaru Impreza wagon. Those were my dirty clothes already :P
Hmm thinking about getting the 6 puck unsprung clutch, I have just never driven one before and don't know if it's gonna be a pain to drive for a daily driver. |
Re: Picked up my motor today, a few pics
Originally Posted by Cray91
Originally Posted by jagojon3
The car is a 97 Subaru Impreza wagon. Those were my dirty clothes already :P
Hmm thinking about getting the 6 puck unsprung clutch, I have just never driven one before and don't know if it's gonna be a pain to drive for a daily driver. |
Re: Picked up my motor today, a few pics
nice, very nice. That motor looks pretty enough to jizz on... which I'm sure you have :P
You shoulda just drove your car up there and swaped it out then and there. But nice stuff man... I'm soooooo jealous :-\ |
Re: Picked up my motor today, a few pics
tit for tat bro
https://www.homemadeturbo.com/forum/...?topic=26867.0 you know what to do. stillnoturbo will hook you up every time. Good job fellas. |
Re: Picked up my motor today, a few pics
why use a hoist then drop the motor? looks like u guys had fun tho. good luck on the next boosted motor.
|
Re: Picked up my motor today, a few pics
Cause my garage isn't very tall to pull it out the top and it's so much easier to drop it out the bottom cause you don't have to worry about smashing into ---- trying to angle that ---- for it to come out. Plus there put in from the factory from the bottom so why not take it out from the bottom? ::) Everything went pretty smooth besides the axles nuts were a nightmare. Took alil longer then I expected and hell we just drove the car minutes before and everything still hot as ----. Plus we decided to do this on an extreme hot and humid day so that didn't help out.
A bonus for me was John was a virgin at pulling a motor so I got to pop his cherry! lol. 8) Now it's time for me to finish my LS build and build my manifold and get this fucker in!! Here's a some eye candy on the build up. B18a1 longblock from my local pick and pull for 150. They pulled it and loaded in my car. :) I took her home stripped her down and cleaned her up and painted it with high temp paint. Bought a ebay crank pulley since the stock one was chipped up pretty good and I've never had any problems with lightweight crank pulleys on my other engines. https://img.photobucket.com/albums/v...n/142dd620.jpg After I got my engine I'm like ahh ---- this is all downhill from here. It took me forever to find a reasonable price tranny. Found this hydro GSR tranny for 500 shipped and even got a shift linkage and starter too! Can't pass that ---- up. https://img.photobucket.com/albums/v...n/1be31daa.jpg Finally all the goodies I've picked up for this build. My forged internals I won on ebay a couple of weeks ago for 230 shipped! Eagle rods and SRP pistons. Blox manifold, act unsprung 6 puck, aasco 8lb flywheel brand new I picked up just the day before locally for 100! Two DSM T25's that are going on. Not pictured are ARP head studs also for some more icing on the cake. Just gotta start on my manifold now. Plan to run 15psi on this engine. Should be a nice grocery getter in my 4dr :P https://img.photobucket.com/albums/v...n/91a16f95.jpg |
Re: Picked up my motor today, a few pics
TT B18....sweet.
|
Re: Picked up my motor today, a few pics
fucken sweet!!! did you blow your motor jago?? is that why your getting another one? ;)
|
Re: Picked up my motor today, a few pics
Originally Posted by BoosTedZSix
fucken sweet!!! did you blow your motor jago?? is that why your getting another one? ;)
|
Re: Picked up my motor today, a few pics
I was just alil dirty but ran fine and we even took out and he got to drive it around so he got to see what he was getting and no surprises. Though if anything happens I told him I got his back and do whatever to help him out.
|
Re: Picked up my motor today, a few pics
go with a sprung clutch disc, just alot easier on the drivetrain and holds the power just fine.
Twin T25's eh?... take it from someone who has already done it, not worth the time. Buy a fatty single and call it a day. |
Re: Picked up my motor today, a few pics
Is there going to be a burnout video on the B7 >:D
|
Re: Picked up my motor today, a few pics
Yeah but I just like being different. I'm not looking for neck snapping power or to be chasing down vipers or some crazy ---- and I got the t25's for cheap and will cost me 130 to make my manifold. If I don't like it I just want to see what it's like. You can tell someone in word but sometimes people just have to experience for themselves.
|
Re: Picked up my motor today, a few pics
Yea my b7 isn't gonna last too much longer. It has a pretty loud knock and just seems to get louder and louder. It was tuned perfectly so I am assuming it was just too much power for the motor. After I clean up this engine and tranny and get the new clutch it goin right into the 4 door. Maybe I will get a quick burnout vid on the b7 before I pull it...
|
Re: Picked up my motor today, a few pics
haha i have that same motor hoist too
|
Re: Picked up my motor today, a few pics
take out the rev limiter via uberdata and make a video of how high you can rev the b7 before she pops
|
Re: Picked up my motor today, a few pics
Originally Posted by scottsi
take out the rev limiter via uberdata and make a video of how high you can rev the b7 before she pops
|
Re: Picked up my motor today, a few pics
Originally Posted by AbaZ
Twin T25's eh?... take it from someone who has already done it, not worth the time. Buy a fatty single and call it a day.
|
Re: Picked up my motor today, a few pics
Hey sweet you got the turbos, i lost the tracking. Wondered if you had them yet or not.
|
Re: Picked up my motor today, a few pics
Originally Posted by scottsi
take out the rev limiter via uberdata and make a video of how high you can rev the b7 before she pops
|
Re: Picked up my motor today, a few pics
I dont think a stock b7 could even rev to 9.5k. It would wheeze out by atleast 9000; in neutral even. lol
|
Re: Picked up my motor today, a few pics
Are you half asian? who takes engines out with ------- sandels on? :o
|
Re: Picked up my motor today, a few pics
and who`s Sarah :D
|
Re: Picked up my motor today, a few pics
Originally Posted by Donald125
and who`s Sarah :D
|
Re: Picked up my motor today, a few pics
Originally Posted by jagojon3
Originally Posted by Donald125
and who`s Sarah :D
|
Re: Picked up my motor today, a few pics
if ihad a shitty engine i'd definately see how high i could rev it before something broke, i wonder if the valves would float ad bend or if it would throw a rod
|
Re: Picked up my motor today, a few pics
Originally Posted by scottsi
if ihad a shitty engine i'd definately see how high i could rev it before something broke, i wonder if the valves would float ad bend or if it would throw a rod
|
Re: Picked up my motor today, a few pics
put er NA and rev it
|
Re: Picked up my motor today, a few pics
Originally Posted by AbaZ
Are you half asian? who takes engines out with ------- sandels on? :o
|
Re: Picked up my motor today, a few pics
lol, I just thought it was werid.. I thought asians were the only ones who did everything in sandels ;)
|
Re: Picked up my motor today, a few pics
I'm so injen I bored out Juilo's injector seals for his 450's sitting indian style in his garage and didn't even realize it till he started laughing at me. He was like "wow you really are injen. Your sitting cross legged indian style Henry! lol". I don't ---- around with ---- like this. 8) Jeff that gold valve cover was in honor of you! The LS's valve cover is getting painted gold too. I was testing it out first on that one to see if it was worthy enough. :P
|
All times are GMT -5. The time now is 11:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands