Oil inlet hole on a 14b
#8
Re: Oil inlet hole on a 14b
well, i just wanted to take it there to find out what the threading was.
Steve at Stealthmode sent me what looks like an M8x1.5, but the threading is off and the diameter is too small. he's going to send me the right one, just have to find out what it is.
that's why im guessing an M10x1.25, but am not 100% positive.
Steve at Stealthmode sent me what looks like an M8x1.5, but the threading is off and the diameter is too small. he's going to send me the right one, just have to find out what it is.
that's why im guessing an M10x1.25, but am not 100% positive.
#10
Re: Oil inlet hole on a 14b
Originally Posted by BoosTedZSix
are you sure your not trying to put the oil line in the water coolant passage :P
this being that they are standard, and you will probably never find the correct fitting.
just use the stock banjo bolt fitting (built in restrictor) and weld the stealthmode fitting to the end of it.