|
The Official HMT's Fastest Cars thread
Alright the old 1/4 mile thread has become a clusterfuck and I think it would be good to redo it. So here we go. To qualify to be on HMT's fastest you must meet these requirements:
1. You need 150 post minimum. The old thread was just noobs with 1 post, this is for HMT members. 2. Pics of timeslips are good but not required. Please put all the info you can from the slips and the complete setup of your car. 3. This is for only times you ran, not what it would have ran or what it could have or anything else. And please post times for only your cars, not someone else's. 4. I'd like to do a top to or top 25 so to narrow things down so only post if you ran better than a 14.0 5. If you only ran an 1/8 mile than post that if its better than a 9.0 Please be truthful, if something doesn't add up or looks like bullshit, it won't be added. I'll take all the top posts and organize them in another thread so start posting up. Old thread: https://www.homemadeturbo.com/forum/...p?topic=4513.0 |
Re: The Official HMT's Fastest Cars thread
how do you convert from 1/4 to a 1/8th? then i can post mine
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by TurbodEG
how do you convert from 1/4 to a 1/8th? then i can post mine
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by TurbodEG
how do you convert from 1/4 to a 1/8th? then i can post mine
Again this isn't a guessing thread, its only for realistic times . But you can post your 1/8th mile if its faster than a 9.0 I'll do an 1/8 mile one too. |
Re: The Official HMT's Fastest Cars thread
13.1 @ 106
1.9 - 60' Stock Block B18b, Sc34 turbo, 15-16 psi, 22" M&H Slicks |
Re: The Official HMT's Fastest Cars thread
https://img.photobucket.com/albums/v...y/Dsc00144.jpg
This is my old car but its the last one I've been to the track in. Car 134. 96' GSR, 18G turbo, street tires. |
Re: The Official HMT's Fastest Cars thread
dont lie, you know you were 135 :P , you should edit the first post and list everyones times and what not in one post rather than having to scroll through pages to see what the times are. and possibly go from fastest to slowest. just a suggestion ;)
|
Re: The Official HMT's Fastest Cars thread
1 Attachment(s)
Attachment 36430
t70 on 22psi et street 235 60 15 tires with 35 psi in them . upped boost now its time to get a run. http://i17.photobucket.com/albums/b6...Picture052.jpg |
Re: The Official HMT's Fastest Cars thread
r/t.....516
60ft...1.89 1/8....8.69 mph...81.26 1/4....13.62 mph...99.23 d16a6/z6 td04 10psi dsm 450's with uberdata dx trans with a clutchmasters stage 4 clutch |
Re: The Official HMT's Fastest Cars thread
98Ctr has the fastest hatch on here i do believe.
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by crxtuner
98Ctr has the fastest hatch on here i do believe.
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by crxtuner
98Ctr has the fastest hatch on here i do believe.
Originally Posted by FooK
actually i don't think he's passed beau's time yet.
This is why this thread is here so no more guessing, we'll know for sure who the fastest. ;) |
Re: The Official HMT's Fastest Cars thread
Originally Posted by douspray
r/t.....516
60ft...1.89 1/8....8.69 mph...81.26 1/4....13.62 mph...99.23 d16a6/z6 td04 10psi dsm 450's with uberdata dx trans with a clutchmasters stage 4 clutch |
Re: The Official HMT's Fastest Cars thread
1/8: 8.52
MPH: 81.16 60 FT: 1.78 that with the crower 404 cams, the crower valve train and the new head on...but not tuned... |
Re: The Official HMT's Fastest Cars thread
Originally Posted by BoosTedZSix
what kind of tires were you on?
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by TurbodEG
1/8: 8.52
MPH: 81.16 60 FT: 1.78 that with the crower 404 cams, the crower valve train and the new head on...but not tuned... |
Re: The Official HMT's Fastest Cars thread
Originally Posted by d0nfry
did you (or the guy that told you that) run slicks or drag radials? i really have trouble believin your car is that quick with just built head and 11-1 non vtec. any more info on ur setup?
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by TurbodEG
if u want stats on the motor...search for it :)
:-\ |
Re: The Official HMT's Fastest Cars thread
PLEASE POST UP TIMES THAT "YOU" RAN, not the previous owner :)
|
Re: The Official HMT's Fastest Cars thread
60ft: 2.4
mph:103.8 1/4:13.91 90 std hatch, gutted interior, stock y7 block, stock z6 head, ZC tranny w/exedy clutch, T3 .42/.48 @9psi, tubular manifold, 2.5 inch turbo back. 195/50/15 kumho ecsta 711s (the ones that are on hotrex's car right now) thats my old car, had SERIOUS problems with wheels hop, not the 60' time. if i had had some slicks and an aftermarket x-member, i would have went WAY into the low 13s. but thats my time, thats what i ran, and i make no excuses Brett |
Re: The Official HMT's Fastest Cars thread
12.930 @ 104.46 MPH
1.81 60' Stock Z6 T25 @ 11psi HF Manifold 22" Slicks I know I don't have 150 posts yet, but I've been a member since 2002. |
Re: The Official HMT's Fastest Cars thread
Originally Posted by TurbodEG
1/8: 8.52
MPH: 81.16 60 FT: 1.78 that with the crower 404 cams, the crower valve train and the new head on...but not tuned... 95 B18B1 swap VIS Carbon Fiber Hood Drop Zone Coilovers Front and Rear upper strut tower bars Miata Rims with Brand new Kumo 711 tires skunk2 extended lugs Auto meter 5'' tach with shift light Auto meter CF A/F meter and pod Steal Chromoly full race traction bars Clutch Masters lightweight flywheel (8.5 lbs) ACT HD/SS clutch kit Shotpinned stock rods (Hendrins racing) B18C5 P73 ITR pistons (standard bore) OEM Honda factory piston rings ARP head studs ARP rod bolts (1.8L 8MM (for LS-VTEC) 208-6001) P&P Head with 5 ang. valve job Crower 404 camshafts Crower Valvesprings Crower Titanium retainers Stone head gasket Mr. Gasket exhaust manifold gasket Hondata Heat Sheild intake manifold gasket STR adj. cam gears Skunk2 intake manifold ITR throttle cable & bracket GSR TB (Bypass coolant lines into TB) Carbon Fiber 3" intake B&M fuel presure regulator B&M fuel presure gauge AEM high flow fuel filter Taylor 10mm plug wires 99 ITR fuel injectors and fuel rail (240cc) Mugen spec chip (8500 rpm rev) JDM S-AFC (Generation 1) STR cam seal Tanabe exhaust (custom 2 1/4" no cat or resinator) DC sports 4-1 header USDM Energy suspension solid motor mount inserts Energy suspension solid Shift bushing kit OBX lightweight underdrive crankshaft pulley OBX Short throw shifter |
Re: The Official HMT's Fastest Cars thread
I hate huge mod lists like ^^^ ;)
91 CRX Stock GSR bottom end B16 Head w/ Cometic .074 HG. 9.0ish C/R ITR cams, IM. 3" DP/Exh SC61 @ 15psi 550's, GM 2bar, CROME 11.79 @ 122 (22" slicks) Update: 10.82 @ 129 (24.5" slicks) same engine as above w/ a GT35 @ 23-24psi. |
Re: The Official HMT's Fastest Cars thread
88 crx all motor
stock jdm itr motor and itr trans. stock obd-2 ecu shifting without tach cause it just bounced around. weighed 2350 with me in it. and ran 12.6 @107 22x8x13 spinning first and second. |
Re: The Official HMT's Fastest Cars thread
Immokolee Regional Raceway 1/8th mile.
.532 r/t 2.053 60' (crappy usualy 1.8's) 5.221 330' 7.948 1/8 92.36 MPH The timeslip is somewhere in my buddies trailer. Have yet to go 1/4 as I need taller slicks. My 60' times actualy dropped at this hp level due to traction loss. Yes even on slicks! Setup is in the sig. Run was made at just under 17psi full interior and my stereo system in it. |
Re: The Official HMT's Fastest Cars thread
95 Coupe EX ABS, full interior
stock z6 14b@10-12psi unsteadily 450cc/p28/crome 20x8 Mickey Thompsons 13.6@100mph 2.0 60ft 205-50-15 BFG GForce DR's 13.7@101mph 2.1 60ft |
Re: The Official HMT's Fastest Cars thread
nice times dave :6
14.1@103 2.4 60 B18b 10psi T3 stock tires 13.4@110 2.7 60 tight rollin' 5.0 5.5psi twin T3s stock tires 13.9@92 2.4 60 409cid all throttle no bottle plus broken shifter stuck in 3rd gear 255s 14.2@98 2.2 60 69 chevelle 8) bb396 th400 stock tires |
Re: The Official HMT's Fastest Cars thread
My old built D16 coupe went.
8.4 @ 8X 60ft was 2.0 Its been a while since I have seen the slip. It was on small 20" slicks. super 16G turbo, 450s and uber. Best 1/4 blowing a charge pipe off was 13.4 @ 93 I hate DSM outlet flanges. >:D |
Re: The Official HMT's Fastest Cars thread
KA24DET @ 13-14psi. Pump gas pwn3d me.
T3/T4, 480cc injectors Emanage Shitty used all-seasons 13.3@111mph |
Re: The Official HMT's Fastest Cars thread
I don't have over 150 posts, so I'll post Dustin's (turbohf) car since I did most of the work on it.
TurboHFs GTI: Best time: 13.21 @ 115 Best trap: 13.67 @ 117 on 40 series street tires |
Re: The Official HMT's Fastest Cars thread
93 civic Si
81mm B16 t3t4 62-1 full race manifold open 3 inch DP hondata 24.5x9x13 M&Hs-bogarts 11.19@129 1/8 was a 7.1 i beleive |
Re: The Official HMT's Fastest Cars thread
60ft-1.983
1/8 et-8.3 1/8 mph-88.1 not turbo... RLZ built ITR: 85mm custom weisco pistons, -1cc 85mm aebs sleeved jdm ITR block custom LS length Carrillo Pro A-beams 92mm Crower crank RLZ mild port job on 96 ITR head RLZ stage 3 cams RLZ valve train SRR cam gears S4c w/kaaz 185/65/14 Aqua Tread 3's @ 20psi tuned on...something...i think uberdata by joey d...and then fucked up by mark riley of horribly shitty turbo tune ltd. compression = mid 10:1's stock GSR throttle body 60mm espiler exhaust ---- hole JG sheetmetal intake manifold (the one from the RLZ manifold test on H-T...the GSR based ones are ------- awesome...my b16 based was crap..weird) no cam gear adjustment..just degree'd in and left no timing changes over base timing super rich jdm dc header only revving to 8300 made 214/158 |
Re: The Official HMT's Fastest Cars thread
I don't post much but I've been around here since 2003 so I'm posting anyways
The car ran 12.08 @125mph on dot tires. Obiously the launch sucked. I never got a chance to run it on slicks and get a clean pass in. As soon as I put the slicks on I ran into plug wire problems and it kept mis-firing. Next year we'll get to see how fast it will really go. Cylinder head mods- ARIZONA ZCAR - adjustable cam gear CRANE CAMS - valve springs and retainers FERREA - stock sized intake valve w/ 1mm oversized exhaust valves WEB CAMSHAFTS - Custom ground turbo cam HKS - 2mm head gasket LONEWOLF PERFORMANCE - race ported and polished P90 head w/ ceramic coated combustion chambers ARP - head studs LONEWOLF PERFORMANCE - Powder coated valve cover Engine mods- Forged pistons LONEWOLF PERFORMANCE - raceprepped and polished connecting rods ARP - main studs ARP - rod bolts ABSOLUTE AUTOMOTIVE - assembled shortblock MSA - euro single groove crank pulley Intake/exhaust- LONEWOLF PERFORMANCE - Header w/ ceramic coating (inside and out) JAMES THAGARD - custom intake manifold MASTER POWER - T70 compressor w/ P trim wheel and turbonetics .58 exhaust housing TURBONETICS - Evolution Wastegate TURBO XS - RFL blow-off valve LONEWOLF PERFORMANCE - custom intercooler pipes with cold air intake and K&N filter SPEARCO - 1080cfm intercooler (previously owned by Lisa Kubo) LONEWOLF PERFORMANCE - 3" mandrel bent ceramic coated stainless downpipe w/ v- band connections. DYNOMAX - 3" race bullit muffler 240sx throttle body LOKAR - Stainless throttle cable LONEWOLF PERFORMANCE - fuel rail 52pph fuel injectors ACCUFAB - Adjustable fuel pressure regulator Stainless fuel lines stainless oil feed line for turbo GREDDY - Profec B boost controller Transmission/ differential- Borg Warner T-5 SUPERIOR FRICTION - custom clutch ARIZONA ZCAR - Lightweight billet steel flywheel SUMMIT RACING - Universal Driveshaft loop 300zx 3.7 LSD Interior- VICTORIA BRITISH - Full dash cap MSA - molded Carpet kit Swapped red interior to black interior MSA - Replacement floor pans (due to rust) Digital to Analog Gauge swap with 130mph Speedo PROFORM - shift light ISSPRO - EGT gauge and sender AUTOMETER - Air/fuel ratio gauge, AUTOMETER - 30psi boost gauge VDO - 25psi boost gauge INNOVATE - LM1 wideband/datalogger SONY - tape deck with 10 disc changer in glovebox PILOT - “D” shapped steering wheel Exterior- Closin pearl blue IMRON 6000 paint applied by me (Bodyshop manager at MHC Kenworth by day, part owner of Lonewolf Performance by night) Remote mount Engine oil cooler MSA - Aero II body kit with F40 spoiler M&H - drag radials on 6 spoke 14" rims for street fun M&H - Slicks on Centerline 15x9" rims for 1/4 mile track use YOKOHAMA - A550H tires in the front Misc/Other- WALBRO - 255hp (high pressure) fuel pump TCI - rollstop/linelock SDS - EM4-6F engine management system with upgraded MSD coil packs GRIFFIN - Aluminum Radiator ZIRGO - 16" electric fan with adjustable thermostat SPEARCO - methanol injection kit NGK - spark plugs ACCEL - 8mm spark plug wires semi-metalic brake pads |
Re: The Official HMT's Fastest Cars thread
^^^Yeah, but what kind of diapers did you wear when you were a baby? :S
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: The Official HMT's Fastest Cars thread
I dont have 150 but i will soon
i did a 13.72 with my crx no interior, slicks, mugen chip(no rev)b18a1 and my friends nitrous fogger but i also did a 26.somthin that day first day after mpfi swap and engine swap, coil neg was grounding out |
Re: The Official HMT's Fastest Cars thread
13.9 @ 101
1990 Civic Si Hatch D16Z6 bone stock No-name cast mani Garrett T3 .48/.42 60 trim 'modified' internal gate at 10-11psi Grip Force clutch (fuhhhhk) 2.5" open pipe exducer-->back Uber 1.7 chipped P06 / 450's BFG drag radials CCA intercooler Other ----, too... |
Re: The Official HMT's Fastest Cars thread
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by Dr.Boost
^^^Yeah, but what kind of diapers did you wear when you were a baby? :S
|
Re: The Official HMT's Fastest Cars thread
Originally Posted by random-strike
all that and it doesnt say what car or engine?
Bahaha, I didn't even notice that! :D He was too busy listing the "important" stuff like both of his boost gauges and his tape deck. :6 AUTOMETER - 30psi boost gauge VDO - 25psi boost gauge INNOVATE - LM1 wideband/datalogger SONY - tape deck with 10 disc changer in glovebox PILOT - “D” shapped steering wheel Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: The Official HMT's Fastest Cars thread
If you don't have 150 posts don't post in this thread. I'm sick of deleting posts from ------- noobs. ::)
|
| All times are GMT -5. The time now is 03:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands