New flanges just came in
|
Re: New flanges just came in
That is tight yo!!
|
Re: New flanges just came in
nice touch ya have there! now lets see it installed already!!!!! j/k dont wanna ruine a perfectly good flange now do we??
|
Re: New flanges just came in
I bet ull see a 30-40whp Gain :o How close is his setup from being done?
|
Re: New flanges just came in
Have you sold that one (1) flange to two or more people yet?
|
Re: New flanges just came in
About a month ish out. block was sent out today. have everything to build it, just waiting to get the block back and then 600+ whp
|
Re: New flanges just came in
Whats the setup going to be :)
|
Re: New flanges just came in
Originally Posted by Joseph Davis
Have you sold that one (1) flange to two or more people yet?
|
Re: New flanges just came in
It's okay! You can sell it to me as long as I'm the one who actually gets it. :y
|
Re: New flanges just came in
Originally Posted by SinisterCRX
Whats the setup going to be :)
Sleeved H22A Endyne Pistons Eagle 900hp rods Ported H22 head Ferrea Valves Supertech springs/Retainers PTB6168 Turbo (T4 Skunk 2 Intake manifold BDL Throttle body Precision 1000cc Injectors Golden Eagle Fuel Rail Balance Shaft Eliminator kit Comp Clutch Twin Disc Tail 44mm Vband wastegate JR Topmount (yet to be started! 3 month wait (double backorderd)) (1 order pending lolz) Quife LSD 3bar MANIFOLD ABSOLUTE PRESSURE Sensor A headgasket ARP studs No Dizzy (anyone have an h22 dizzy?) http://i44.photobucket.com/albums/f4...Picture055.jpg http://i44.photobucket.com/albums/f4...Picture032.jpg http://i44.photobucket.com/albums/f4...llerwaves2.jpg http://i44.photobucket.com/albums/f4...H22/turbo5.jpg http://i44.photobucket.com/albums/f4.../H22/mani2.jpg http://i44.photobucket.com/albums/f4...vtec/H22/9.jpg http://i44.photobucket.com/albums/f4...vtec/H22/7.jpg |
Re: New flanges just came in
but oh noez the h22 is teh suck
</average hmt user> |
Re: New flanges just came in
who did the port work on the head? Looks ------- sweet :y
|
Re: New flanges just came in
whats the h22 going in? if its the 4dr what are you doing with the old setup?
|
Re: New flanges just came in
Originally Posted by highroller54
whats the h22 going in? if its the 4dr what are you doing with the old setup?
|
Re: New flanges just came in
[img width=700]http://i44.photobucket.com/albums/f4/bigdaddyvtec/1.jpg[/img]
Nice ride :) |
Re: New flanges just came in
very custom i like it. haha i would actually buy a flange that said that on there. also sounds like a great setup.
|
Re: New flanges just came in
a nig nog flange seems really out of place for captain white power
|
Re: New flanges just came in
Originally Posted by FooK
a nig nog flange seems really out of place for captain white power
Hey Mr Lee: IVE GOT A NICE SET OF BFG G forces for you to punish while we tune it!!!! Hey fook... WHiTE POWER NAGGER!!!!! O0 I dont have a problem with black people....its ------s i cant stand... so stop being one..... LOL ------s CAN be white you know.... by the wy... Iv got some accord body ---- for a 94.. So play nice... Fucker. >:D |
Re: New flanges just came in
Originally Posted by SinisterCRX
but oh noez the h22 is teh suck
</average hmt user> |
Re: New flanges just came in
Originally Posted by bigdaddyvtec
Not Captain White power.... MR Horsepower... ---- ya had to dig forthat pic of the car :6 ...lol Gonna be NA again for a while while we put this fucker together and get it caged and ----....
Hey Mr Lee: IVE GOT A NICE SET OF BFG G forces for you to punish while we tune it!!!! Hey fook... WHiTE POWER NAGGER!!!!! O0 I dont have a problem with black people....its ------s i cant stand... so stop being one..... LOL ------s CAN be white you know.... by the wy... Iv got some accord body ---- for a 94.. So play nice... Fucker. >:D |
Re: New flanges just came in
Love the engine in the kitchen pics. lol
Gives a new meaning to, "so clean you could eat off it". Sounds like a killer setup. |
Re: New flanges just came in
Cute diet root beer :-*
|
Re: New flanges just came in
Originally Posted by Random Hero
BigDaddyVtec's new flange
Originally Posted by Random Hero
its not my setup, its for bigdaddyvtec's accord.
|
Re: New flanges just came in
Kinda hard to do H2B conversions in an Accord. How are you planning on pushing over 110 whp through a pile of piss gearbox? :(
|
Re: New flanges just came in
Originally Posted by Joseph Davis
Kinda hard to do H2B conversions in an Accord. How are you planning on pushing over 110 whp through a pile of piss gearbox? :(
|
Re: New flanges just came in
I love you, Fookster, but if I ever have the bad taste to visit a shithole like the Pac NW I'm shoving my meth pipe up your tubby ass. >:D
|
Re: New flanges just came in
Originally Posted by Joseph Davis
I love you, Fookster, but if I ever have the bad taste to visit a shithole like the Pac NW I'm shoving my meth pipe up your tubby ass. >:D
|
Re: New flanges just came in
Love the flange. ;D
|
Re: New flanges just came in
Originally Posted by Joseph Davis
I love you, Fookster, but if I ever have the bad taste to visit a shithole like the Pac NW I'm shoving my meth pipe up your tubby ass. >:D
JD, You in ???? HA HA HA. Fook is fat like me right??? Maybe he SHOULD smoke it... LOL Leed: Thanks!!! |
Re: New flanges just came in
------- Sweet.
|
Re: New flanges just came in
Eh, I worry about you F/H guys. Your transmissions fall apart a lot. :(
|
Re: New flanges just came in
Originally Posted by Joseph Davis
Eh, I worry about you F/H guys. Your transmissions fall apart a lot. :(
Thx guys..... |
Re: New flanges just came in
Originally Posted by bigdaddyvtec
Ive HERD that you can use a b tranny, but have to use the h PP and FW, with the b disks.. Thae trannys supposedly line up exept for 1 bolt. anyone know if this is true??? Otherwise im picking a M2F4 trans up tonight.... 300.
Thx guys..... |
Re: New flanges just came in
Originally Posted by bigdaddyvtec
Ive HERD that you can use a b tranny, but have to use the h PP and FW, with the b disks.. Thae trannys supposedly line up exept for 1 bolt. anyone know if this is true??? Otherwise im picking a M2F4 trans up tonight.... 300.
Thx guys..... The bolt patterns are of a family, but do NOT bolt up. It is the exact same bolt pattern as B-series with the top two botls moved ~1" vertically and the side holes moved ~1" horizontally (outward). You line the B-series trans up with the F/H, weld tabs on the B-bellhousing to run bolts into the F/H engine, use the B-trans to align the drivetrain, and fabricate driver's mount and B-intermediate shaft mount bracket. Takes about 5 hours if you can weld and stuff. |
Re: New flanges just came in
Originally Posted by Joseph Davis
The A/B/F/H flywheels interchange, and you run the B PP and disk.
The bolt patterns are of a family, but do NOT bolt up. It is the exact same bolt pattern as B-series with the top two botls moved ~1" vertically and the side holes moved ~1" horizontally (outward). You line the B-series trans up with the F/H, weld tabs on the B-bellhousing to run bolts into the F/H engine, use the B-trans to align the drivetrain, and fabricate driver's mount and B-intermediate shaft mount bracket. Takes about 5 hours if you can weld and stuff. |
Re: New flanges just came in
[img width=3000 height=4000]https://www.homemadeturbo.com/kjalsdka[/img]
|
Re: New flanges just came in
nice blanknesss... was that a thought?????
|
Re: New flanges just came in
Looks like you had a thought, also looksl ike you lost it johnny
|
Re: New flanges just came in
Hey Josh, I'll trade you one of those flanges for the drain flanges you never sent back, you pile of ------. :X
|
Re: New flanges just came in
wow, that accord is gona be quick
|
All times are GMT -5. The time now is 02:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands