My Turbo 5.0 project!
 

Here are some pics of what I have done on the car. I have a lot still do do but it is getting close!

First time I ever pulled an engine! That was fun!

http://memimage.cardomain.net/member...39_96_full.jpg
http://memimage.cardomain.net/member...39_97_full.jpg

While it was out, I had my chance to drain the pan for the Oil drain.
http://memimage.cardomain.net/member...9_100_full.jpg
I got it back in the car and installed a new fuel pump. What a job!
http://memimage.cardomain.net/member...39_99_full.jpg
http://memimage.cardomain.net/member...9_103_full.jpg
Here is a shot of the Turbo
http://memimage.cardomain.net/member...39_92_full.jpg
Turbo Specs:
Master Power 60-1 "P" Trim
TO4 ' P ' Trim Turbine wheel - 64.5mm / 78mm
Super 70 Compressor wheel - 60.5mm / 84mm
.70a/r Compressor housing
.68a/r T4 Exhaust housing

Intercooler Mounted on the car. I got this cooler from Custom Coach, Thanks to them for the AWESOME peice!
http://memimage.cardomain.net/member...9_110_full.jpg
http://memimage.cardomain.net/member...9_111_full.jpg

I have the oil Feed and Drain done on the car. Tested this weekend and everything works Great!
http://memimage.cardomain.net/member...9_116_full.jpg
http://memimage.cardomain.net/member...9_117_full.jpg

I have the wastegate mounted and on, not hooked up yet...

Whats left to do: place the battery in the trunk, hook up all the guages, build the charge pipes, build the downpipe, install some check valves, get it on a dyno to try and tune it!


I hope you enjoy the reading and pics!
Fred

Re: My Turbo 5.0 project!
 

is the oil feed fitting nylon line? ??? other than that it looks good

Re: My Turbo 5.0 project!
 

Thanks! 3/16 brake line.

Re: My Turbo 5.0 project!
 

Looks good man O0

Re: My Turbo 5.0 project!
 

^^^^^^^^^, not that I dont love hondas but it is nice to see other turbo projects on here, good luck!

Re: My Turbo 5.0 project!
 

do you have the other side looped over to the turbo side manifold? or a v8 with a turbo on 4 cylinders?

Re: My Turbo 5.0 project!
 

Sorry, here is a pic of the crossover:

http://memimage.cardomain.net/member...9_118_full.jpg

http://memimage.cardomain.net/member...9_119_full.jpg

http://memimage.cardomain.net/member...9_120_full.jpg

You can also see where the wastegate is on the car.

Re: My Turbo 5.0 project!
 

no we can't ;) red X ALERT! :P

Re: My Turbo 5.0 project!
 

that looks really good i kinda dig those foxbody mustangs

Re: My Turbo 5.0 project!
 

man that thing is gonna fly! nice work