My Single Cam EF
8 Attachment(s)
Well i figured it was time to post my set up
91 civic dx (10psi) D16Y8(stock) ported z6 intake mani W/ 70mm TB(thanks chris ;D ) Ps9(one wire vtec) Basemaped by me using TURBOEDIT DSM 450's Poly Mounts(windowWeld) JK motorsports traction bars Garrett AirResearch 42/48 Jackie chan BOV, wastegate, manifold(braced and welded to ----), intercooler yada, yada, yada you know the rest 450's ;) Attachment 18035 Dump tube :4 Attachment 18036 Attachment 18037 Attachment 18038 Minimal clearance :6 Attachment 18039 Attachment 18040 Attachment 18041 Last but not least Attachment 18042 |
Re: My Single Cam EF
your downpipe will clearance itself, what are you talking about??
|
Re: My Single Cam EF
look at the radiator and downpipe one more time
|
Re: My Single Cam EF
yeah, i have. it'll clearance :)
props on the setup, now crank it to the nog setting |
Re: My Single Cam EF
Looks nice but ditch that lip and put a EF lip on it.
|
Re: My Single Cam EF
home depot gutter guard lip ftw
|
Re: My Single Cam EF
|
Re: My Single Cam EF
i used to have a si lip on it but got tired of it :-\
|
Re: My Single Cam EF
Love it.
Lose the lip. |
Re: My Single Cam EF
ill stick with it for now like i said im tired of this si lip and you sir have the HomeDepot lip on lock
|
Re: My Single Cam EF
hahaha nice wheel covers, i had the same ones on my 97 civic :P
|
Re: My Single Cam EF
God damn, maybe you should practice alittle before you weld next time.
|
Re: My Single Cam EF
Originally Posted by 89hatchsir
God damn, maybe you should practice alittle before you weld next time.
|
Re: My Single Cam EF
I like the 70mm TB and like 2" charge pipe :P Great fab work on the DP :y
|
Re: My Single Cam EF
Better to have a 2" charge pipe dumping into a 70mm tb then a 70mm charge pipe to a 2" tb I guess.
|
Re: My Single Cam EF
Originally Posted by d-man
Better to have a 2" charge pipe dumping into a 70mm tb then a 70mm charge pipe to a 2" tb I guess.
less air to occupy the chargepipe |
Re: My Single Cam EF
Ya you really should atleast get a 2.5 pipe and run a 2.5 to 3 inch coupler aka what all the ebay intakes get. Looks good though love the ex hub cabs. Thats what I rolled my dx 90 civic on for years. Spacer plate=dope. Keep it up.
|
Re: My Single Cam EF
Originally Posted by c0mpl3x
less air to occupy the chargepipe |
Re: My Single Cam EF
civic ex hubcaps are the ----
|
Re: My Single Cam EF
yeah i figured id rock them instead of the steelies look
|
Re: My Single Cam EF
I had to stop using my EX hub caps. They were falling apart and the plastic below is some off yellow ----.
That downpipe looks like hell, but if it holds air then you're golden. |
Re: My Single Cam EF
Didnt you have a skunk2 intake manifold/throttle before I sold you the z6/spacer/70mm throttle body? Just wondering if you noticed any difference besides the fact that all skunk2 throttle bodies stick LOL
|
Re: My Single Cam EF
shitbird welds aer sexy! mucho hawt! that lip looks a bit ricey thouigh. other than that, i like!
|
Re: My Single Cam EF
yeah that whole lip thing seems to be everyones opinion lol
|
Re: My Single Cam EF
nice setup but man does that turbo sit for from the block, no wonder those manis break
|
Re: My Single Cam EF
Originally Posted by chris
Didnt you have a skunk2 intake manifold/throttle before I sold you the z6/spacer/70mm throttle body? Just wondering if you noticed any difference besides the fact that all skunk2 throttle bodies stick LOL
|
Re: My Single Cam EF
Originally Posted by rosario4124
HELL YEAH i noticed the difference chris, your TB's are the ---- man and the port job looks sweet, i noticed the real difference when i was NA for like a week or 2(feels even better with 10 PSI >:D ) . Your ported mani, TB, and spacer package completely destroys the old skank 2 set up . i would recommend everyone to buy one.
To bad skunk2 has marketed themselves to the point that everyone swears they are gods. The spacer seems to be the answer for the d16z6 manifold. I have made good power for years without the plenum spacer but with it :y.Your one of a couple guys with similar feedback I have gotten glad it worked out for ya. |
Re: My Single Cam EF
Yeah man most of their ---- sucks even their suspension isnt that great , sad to see fine work and products like yours get over looked by high priced garbage with a fancy names :3
|
Re: My Single Cam EF
Originally Posted by Racintweek
nice setup but man does that turbo sit for from the block, no wonder those manis break
|
Re: My Single Cam EF
Originally Posted by E-b0la
They're designed to have the turbo facing the other way, which tucks it closer to the block putting less force on the welds. Either way they still suck balls.
|
Re: My Single Cam EF
Originally Posted by rosario4124
Yeah man most of their ---- sucks even their suspension isnt that great , sad to see fine work and products like yours get over looked by high priced garbage with a fancy names :3
Ya they do a great job of making people think they are the best stuff out there. I mean they got famous by copying a type r manifold and throwing there name on it. The d series is just a b16a plenum on d series runners. The chance they did any r&d on that part=0 hence why it doesnt work. The z6 manifold has shown again and again with skilled port work and a properly sized throttle body to own all the aftermarket stuff out there. The spacer which gives some extra plenum volume and velocity just adds to the cause. Well back on topic ching chang bong turbo manifold is tiiite. How long did you spend on that dp? |
Re: My Single Cam EF
not very long the bends were like an OH ---- i dont have any clearence type of idea because with those mani's the turbo is supposed to face the other way but i didnt want that , i mean i could have welded it better but it was getting late and my skill was starting to diminish. but it doesnt leak and has got HMT writtten all over it lol :6
|
Re: My Single Cam EF
What no props on that dp I created
HUh welder boy |
Re: My Single Cam EF
my bad for anyone who doesnt know "Towdogg" is a buddy of mine who helped me out on all of this(thanks mang)and got me into boost , he creates most of the bends and angles for me(pretty much pulls them out of his ass lol). , for lack of better words my right hand man :6
|
Re: My Single Cam EF
I had some clearance issues with my wg dump and torching the pipe/hitting with a ball peen hammer can get you a nice 1/2 inch of clearance that wont mess up flow too badly. Just get it glowin hot
|
Re: My Single Cam EF
Radiator + downpipe=wow.
|
Re: My Single Cam EF
Originally Posted by losesomethinbra
I had some clearance issues with my wg dump and torching the pipe/hitting with a ball peen hammer can get you a nice 1/2 inch of clearance that wont mess up flow too badly. Just get it glowin hot
|
Re: My Single Cam EF
I LOVE THE DP SO Sick :o and the CDM maNI repaired gangster hell ya
|
Re: My Single Cam EF
Originally Posted by turbo4life
I LOVE THE DP SO Sick :o and the CDM maNI repaired gangster hell ya
|
Re: My Single Cam EF
I miss my EF :-[
|
All times are GMT -5. The time now is 01:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands