HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   My new best AND with a stock block (https://www.homemadeturbo.com/general-discussion-6/my-new-best-stock-block-82247/)

Bad91TSI 09-05-2007 07:03 PM

My new best AND with a stock block
 
4 Attachment(s)
It's torward the end of the racing season so I decided to buy some race gas and turn up the boost.

Last weekend at Battle Of The Imports I ran a best of 11.32 @ 130mph. It felt good. I also ran a 11.33 @ 117mph... letting off right after the 1000ft mark, because I didnt want to get disqualified for going too fast without a roll bar. The motor set-up took it well, and is still running great. The 130mph trap was with 28psi. I ran alot of 127mph traps on 26psi too. I have a stock rebuilt block consisting of 1G rods, re-used original rod bolts, 2G pistons, ARP head studs, & Mitsu 4-layer metal head gasket. It held up surprisingly well :) There were faster cars in my Class, but I got lucky... 1 car was disqualified for going too fast without a cage, one was cought sleeping at the light and got eliminated, and another missed a shift. All that along with my consistent driving allowed me to take 1st place in the Street Tuner Class, yeay:)

Here are the slips:
Attachment 24235
.
Attachment 24236
.
Attachment 24237
.
Attachment 24238

Bad91TSI 09-05-2007 07:07 PM

Re: My new best AND with a stock block
 
I run a FP3065 with FP2x cams, dual springs, Stock head, Stock parts Bottom end, & AEM EMS.

My 11.3x @ 117 probably would have been a 11.0-11.1, but I let off right after the 1000ft mark because I didnt want to get disqualified for not having a roll bar.

.....Mainly I just wanted to let you guys know what a good running stock internal bottom end is capable of ....people have been telling me a solid bottom end will hold, and now I know what they mean.:thumb: With sticky tires they would have easily been 10sec runs!;)


BIG THANKS TO PINA MOTORSPORTS FOR PUTTING THIS TOGETHER FOR ME!
Thanks Andre!

SpankedYA! 09-05-2007 07:45 PM

Re: My new best AND with a stock block
 
So someone built your car and you are posting it on HMT? ok good job.

SDRAWKCAB 09-05-2007 07:53 PM

Re: My new best AND with a stock block
 

Originally Posted by Bad91TSI
I run a FP3065 with FP2x cams, dual springs, Stock head, Stock parts Bottom end, & AEM EMS.

My 11.3x @ 117 probably would have been a 11.0-11.1, but I let off right after the 1000ft mark because I didnt want to get disqualified for not having a roll bar.

.....Mainly I just wanted to let you guys know what a good running stock internal bottom end is capable of ....people have been telling me a solid bottom end will hold, and now I know what they mean.:thumb: With sticky tires they would have easily been 10sec runs!;)


BIG THANKS TO PINA MOTORSPORTS FOR PUTTING THIS TOGETHER FOR ME!
Thanks Andre!



GET THE ---- OUT OF HERE YOU CUM GUZZLING PEICE OF ---- BEFORE I SKULL ---- YOU.

HondaTuner 09-05-2007 08:04 PM

Re: My new best AND with a stock block
 

Originally Posted by CSaddict
So someone built your car and you are posting it on HMT? ok good job.

For a second there I thought floyd posted again.

Zing!

:6

ONDUHFLO 09-05-2007 08:56 PM

Re: My new best AND with a stock block
 

Originally Posted by SDRAWKCAB


GET THE ---- OUT OF HERE YOU CUM GUZZLING PEICE OF ---- BEFORE I SKULL ---- YOU.

I'll have you know ocular penetration is illegal. Havent you ever heard of the skull------- bill? ::)

ONDUHFLO 09-05-2007 09:01 PM

Re: My new best AND with a stock block
 
DSM=Ghey, Nice job, you got to drive a "quick" car that you never built. I drove an NSX once, guess u should be sucking my nuts now? :l

udaredme 09-05-2007 09:08 PM

Re: My new best AND with a stock block
 
regardless..quick car..even if you had NOTHING to do with the build other than forkin out the cash to have it done.. :1

BigD 09-05-2007 09:31 PM

Re: My new best AND with a stock block
 

Originally Posted by ONDUHFLO
DSM=Ghey,

Judging by what's in your avatar you have no room to talk.

ososlohatch 09-05-2007 09:33 PM

Re: My new best AND with a stock block
 
if i were driving it'd run 10's ;)


All times are GMT -5. The time now is 08:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands