Re:My day at the dyno. :(
Murphy's Law: "If it can go wrong, it will."
|
Re:My day at the dyno. :(
Originally Posted by crx88Si
Murphy's Law: "If it can go wrong, it will."
i thought it was "beau's law" |
Re:My day at the dyno. :(
I know this sounds stupid but do you really need to weld a ridge? I'm thinking about making a line of jbweld around the pipe cause I don't have a welder, or maybe just duct taping a piece of wire around the pipe.
|
Re:My day at the dyno. :(
go down to your local fabrication shop and ask if they have a bead roller if so they should be able to roll a nice bead on the ends of your pipes in about 5min for a minimum charge
Beau |
Re:My day at the dyno. :(
Originally Posted by Doofnoil
I know this sounds stupid but do you really need to weld a ridge? I'm thinking about making a line of jbweld around the pipe cause I don't have a welder, or maybe just duct taping a piece of wire around the pipe.
|
Re:My day at the dyno. :(
i wouldnt use jb weld there....if little chunks come off that ---- if going into your motor
|
Re:My day at the dyno. :(
ok try this.. in theory it should work better and it costs nothing but 5 min per end...
Take a hand saw and score the surface of the tube where the coupler's connect. this will give the couplers a rougher surface to "bite" into instead of shiney steal. I'd say make the scoring about 1/2" - 1" all the way around. if that doesn't work, go get that bead weld :) |
All times are GMT -5. The time now is 06:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands