Motor Mounts Wont Dry (update)
#11
Re:Motor Mounts Wont Dry
i used it before... just not to fill the whole mount.... it dries pretty good... kinda rubbery... but its just taking way to ------- long.....
Might just go out tommorow and buy a food dehydrator and put it in there for a while...
Might just go out tommorow and buy a food dehydrator and put it in there for a while...
#12
Re:Motor Mounts Wont Dry
I use 3m windo-weld. About 9.99 a tube.. 1.5 tube will do a civic. ---- dries in about 24 hours to a pretty stiff rubber consistancy. been there on my old Accord for 3 years now and even rescued some of my ---- *** split mounts!
after:
i didnt take a pics, but after that i trimmed the dried excess off with a sharp knife and it looked purdy just like the dogbone front mount up top. a lot cheaper than 300 bucks of new mounts! notable increase in interior vibration, but whatever
after:
i didnt take a pics, but after that i trimmed the dried excess off with a sharp knife and it looked purdy just like the dogbone front mount up top. a lot cheaper than 300 bucks of new mounts! notable increase in interior vibration, but whatever
#13
Re:Motor Mounts Wont Dry
Just keep heating it up and then cooling it right after... check on the bottle of the stuff you bought for more information.. u ready for the interior vibrations? why didnt u tell me u needed a mount.. i had an extra good condition one or 10
#16
Re:Motor Mounts Wont Dry
I dont know about good as new... maybe better than new... depends on how you look at it... mine was broken.. so i was getting mad wheel hop when i took off.... so im stiffening it solid.. now it shouldnt move... but theres gonna be a hell of a lot more noise coming from your interior trim.... coin in the ashtray...etc etc... but who needs all that ----?
#17
Re:Motor Mounts Wont Dry
Well if its roofing ---- its probably butyl rubber.They dont use silicone for roofing couse it deteriorates.......that chocolaty smells comfirms its rubber and not silicone.
I used tub and tile silicone for mine and it dried solid in like 48hrs.
I used tub and tile silicone for mine and it dried solid in like 48hrs.
#19
Re:Motor Mounts Wont Dry
Well about a week later and that bitch finally dried enough to be put back in the car,....
I had been driving all carefull and ---- like an old lady.... cuz i didnt want to break anything....
I bet the insides still all gushy.... so i hope it doesnt burst and come out squirting like a jelly donut....
I had been driving all carefull and ---- like an old lady.... cuz i didnt want to break anything....
I bet the insides still all gushy.... so i hope it doesnt burst and come out squirting like a jelly donut....
#20
Re:Motor Mounts Wont Dry (update)
Well took it for a test drive and it ------- feels so much better now.... no wheel hop.... smoother shifting... and no bogging on gear change.... and the tires chirp again...
and all this for just fixing 1 mount....
and all this for just fixing 1 mount....
Thread
Thread Starter
Forum
Replies
Last Post
BRIOHATCH
Turbo Parts For Sale
3
08-17-2007 05:03 AM
W O T
General Discussion
23
12-10-2005 05:16 PM
projekteg
General Discussion
9
11-02-2004 07:01 AM
DTRcivic
Turbo Parts For Sale
0
02-27-2003 06:39 PM