The "Ls/Vtec" Turbo Setup.. that Blew ass
Last night me and beau put on his old Turbo B16a setup onto my daily driver LS/Vtec crx. It was a huge pain in the ass. Mainly due to resources (where we were at) The LS/vtec sits a bit higher than the b16a so the downpipe had to be modified. My crx has been totalled so the front end was a complete bitch to work with. Beau was bending my frame with his bare hands HAHAH.. j/k But we did bend the ---- out of the front supports to get the radiator in their. Once that was in, the hood would not shut.. Problems after problems last night..
Then once we leave the damn downpipe is like dragging on the ground (good job beau) ;) So I didnt have any forced inducted tunes, so I uploaded them this morning, and go spin around the block, with a huge ass cloud of smoke.. I come back and I look in the engine bay, and his ------- turbo is just puking oil from the exhaust housing.. Now back to the drawing board... :o https://www.homemadeturbo.com/turbo/lsvtec/bay1.jpg Oh how sexy.. even with a fresh coat of black paint on the manifold.. https://www.homemadeturbo.com/turbo/lsvtec/fmic.jpg Everything was fucked up on the front end... just a complete mess, the intercooler sits funny.. beau cut the ---- out of my front end, hahaha, I didnt take any pics of the hood line because it was tooo embarresing, it has like a 3 inch gap! https://www.homemadeturbo.com/turbo/lsvtec/oil.jpg Nice oil all over the front cross memember.. laskjdfals;kfnu;ah fuk |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Good work guys.. lol
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Is that expandable foam holding the passenger side headlight in place? Gotta love the ghetto-rigging ;D.
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Originally Posted by pbwiz
Is that expandable foam holding the passenger side headlight in place? Gotta love the ghetto-rigging ;D.
shhhhh, your not suppose to see that.. haha, that is the newest trick ---- on the market... its called folded up cardboard (perfect for headlight adjustments) 8) Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
"Good work guys.. lol "
heh only the highest quality ---- for hmt ::) Ithink there might be a problem with the oil return i guess well find out soon. Beau |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Hey, I'm with ya. I was in an accident in my first crx and used the foam corner protectors from the replacement hood to stop the headlight from jiggling around :D. I don't even want to get into how many zip-ties I used to put that car back together.
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
The oil issue was fixed, oil return had a kink. Still need to do some fine tuning, now more than ever.. since I lost my ls/vtec map for my ecu.. ----.
Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
and i even fixed the down pipe since im such a nice guy 8)
Beau |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Well it was a comeback, so you had to fix it :P
nothing like a spark show down highway 2 at 2am.. haha Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
;D 8) ::)
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Well after some slight modifcations last night, the car seems to be running pretty decently.. No boost gauge ??? or air fuel.. the wastegate is set as low as it can go, so roughly 5 psi. It pulls pretty good especially the bottom end. I am gonna keep this setup on for awhile until I can find a good small t3 turbo to use in conjunction with the manifold beau made me.
Must say its nice to drive a boosted B-series.. Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
how do you guys like the JG manifold? Notice big improvements?
I want one soooo bad >:( |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Well I dont have anything to compare it to, since it was the first manifold I put on this car... :-\
So far seems pretty good Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Say how much did you pay for that intake I wonder if you can get me the same discount you guys got...
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Originally Posted by badmuhfuka
Say how much did you pay for that intake I wonder if you can get me the same discount you guys got...
::) |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Mmmmm.... Ls Vtec Turbo. Now that would be sweet. :'(
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
Oh man That is Real Home made stuff.
Looks good though. |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
pretty sick. What are you doing for fuel?
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
450cc dsm injectors, controlled by Zdyne gold Secu.
Need more boost... badly actually, I need tires, because the cords are showing now, lol Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
love the homemade JDM corner lights HAHAHA! 8)
I won't tell nobody about this talk ;) ;) |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
lol i got the hook up on tires bro what size u need? i can get them for u at little or no cost
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
you can have the tires that came on my car ;D the white ones ::)
|
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
I found some at work that will do for the time being..
anyhow.. its free beef at les schwab this month.. lol Jeff |
Re:The "Ls/Vtec" Turbo Setup.. that Blew ass
when are you gunna take it to the track... i wanna know some times!!!! my front end is also moved back....my freakin stock exhaust touches the front crossmember....i dont think i can fit a downpipe....that means no turbo...that means i suck!!!! i guess i can start a new site called homemade supercharger :o!!! YAY ME!!! :D
Dane |
All times are GMT -5. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands