HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   A little mirror trouble. 4234 @@@ (https://www.homemadeturbo.com/general-discussion-6/little-mirror-trouble-4234-%40%40%40-12546/)

smokey_civic 11-28-2003 10:02 AM

A little mirror trouble. 4234 @@@
 
My ------- mirror is no more, it caese to exist. I have an extra one, but I can't seem to find out how the ---- to get what's left of the last one off of the car. I looked, and can't find any ------- screws for it, just for the mirror, not the base. Any help would be great. Steathmode need not apply. ;) - Matt

rexracer 11-28-2003 10:12 AM

Re:A little mirror trouble. 4234 @@@
 
rearview? If so, you can just reuse the mounting base

smokey_civic 11-28-2003 10:15 AM

Re:A little mirror trouble. 4234 @@@
 
*laughs* Haha .... goddamn, I'm an idiot. It's my driver's side side mirror. It's gone. Sorry for being a fucktard. - Matt

rexracer 11-28-2003 10:17 AM

Re:A little mirror trouble. 4234 @@@
 
I dont know what kind of car you have, but i think you have an EF. If so, pop out the little triangle piece on the end of the lever you adjust the mirror with. The you can take off the black triangle piece that has the hole in the center. Once you have this off there are 3 phillips head screws

smokey_civic 11-28-2003 10:21 AM

Re:A little mirror trouble. 4234 @@@
 
I'll try that. Thanks for the help KVH. I'll let you know. - Matt

rexracer 11-28-2003 10:23 AM

Re:A little mirror trouble. 4234 @@@
 
Sorry, there is a screw that holds the adjusting knob on. You'll see it when you pop off the triangle adjusting cover

88crxSi 11-28-2003 10:26 AM

Re:A little mirror trouble. 4234 @@@
 
Matt. this is really simple..

1. look under the housing. there is a hole.
2. stick a phillips (star) screw driver up the hole.
3. wiggle it around til you feel it fall into the slots.
4. turn counter-clockwise a few turns.
5. put a towel on the end of a flat head screwdriver.
6. wedge the screw driver between the mirror and the housing on the side of the mirror farthest from the car.
7. a little pressure and it'll pop out. if not, repeat steps 2 - 4
8. slide the mirror or a little blade like thing (you'll see)
9 install, reverse of removal! voila.

PS i have the glass part of a mirror. there are two styles tho. look on the back of the housing where the stamped id numbers and such are. there should be a 6 digit number. if that number is 007054 then we can do a trade for that crx stereo bezel ;) if not. then we can't ;)

88crxSi 11-28-2003 10:27 AM

Re:A little mirror trouble. 4234 @@@
 
is this just the glass or the entire mirror?

i have the housing too (007054) but it doesnt adjust. the mirror can be adjusted by hand and its sturdy enough to stay in place.

smokey_civic 11-28-2003 10:34 AM

Re:A little mirror trouble. 4234 @@@
 
I have a mirror, it's the kind that bends back and forth, (the other wasn't, that's why it broke ;) ). I don't have the mirror to check and see what it isays, it laying in the road somwhere about 40 miles back. :) - Matt

88crxSi 11-28-2003 10:55 AM

Re:A little mirror trouble. 4234 @@@
 
ok.. well i have a housing compelte w/ mirror if u wanna swap for something. it came off a civic std 89


All times are GMT -5. The time now is 11:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands