A little mirror trouble. 4234 @@@
11-28-2003, 10:02 AM
#1
1.0 BAR
Thread Starter
Join Date: Oct 2003
Posts: 600
A little mirror trouble. 4234 @@@
My ------- mirror is no more, it caese to exist. I have an extra one, but I can't seem to find out how the ---- to get what's left of the last one off of the car. I looked, and can't find any ------- screws for it, just for the mirror, not the base. Any help would be great. Steathmode need not apply. 
- Matt
- Matt
11-28-2003, 10:17 AM
#4
1.5 BAR
Join Date: Jan 2003
Posts: 797
Re:A little mirror trouble. 4234 @@@
I dont know what kind of car you have, but i think you have an EF. If so, pop out the little triangle piece on the end of the lever you adjust the mirror with. The you can take off the black triangle piece that has the hole in the center. Once you have this off there are 3 phillips head screws
11-28-2003, 10:26 AM
#7
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:A little mirror trouble. 4234 @@@
Matt. this is really simple..
1. look under the housing. there is a hole.
2. stick a phillips (star) screw driver up the hole.
3. wiggle it around til you feel it fall into the slots.
4. turn counter-clockwise a few turns.
5. put a towel on the end of a flat head screwdriver.
6. wedge the screw driver between the mirror and the housing on the side of the mirror farthest from the car.
7. a little pressure and it'll pop out. if not, repeat steps 2 - 4
8. slide the mirror or a little blade like thing (you'll see)
9 install, reverse of removal! voila.
PS i have the glass part of a mirror. there are two styles tho. look on the back of the housing where the stamped id numbers and such are. there should be a 6 digit number. if that number is 007054 then we can do a trade for that crx stereo bezel if not. then we can't
1. look under the housing. there is a hole.
2. stick a phillips (star) screw driver up the hole.
3. wiggle it around til you feel it fall into the slots.
4. turn counter-clockwise a few turns.
5. put a towel on the end of a flat head screwdriver.
6. wedge the screw driver between the mirror and the housing on the side of the mirror farthest from the car.
7. a little pressure and it'll pop out. if not, repeat steps 2 - 4
8. slide the mirror or a little blade like thing (you'll see)
9 install, reverse of removal! voila.
PS i have the glass part of a mirror. there are two styles tho. look on the back of the housing where the stamped id numbers and such are. there should be a 6 digit number. if that number is 007054 then we can do a trade for that crx stereo bezel
if not. then we can't
11-28-2003, 10:34 AM
#9
1.0 BAR
Thread Starter
Join Date: Oct 2003
Posts: 600
Re:A little mirror trouble. 4234 @@@
I have a mirror, it's the kind that bends back and forth, (the other wasn't, that's why it broke ). I don't have the mirror to check and see what it isays, it laying in the road somwhere about 40 miles back. 
- Matt
). I don't have the mirror to check and see what it isays, it laying in the road somwhere about 40 miles back. - Matt
