JUnkMOde Your oil lines SUCK!!!!!!!!!!!
04-11-2006, 09:54 AM
#81
3.0 BAR
Join Date: Jun 2003
Posts: 6,857
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
I knew you couldnt trust that ------- racist redneck!!!
Hey Steve by the way,whats the discount rate for a t25 oil feed kit.Pm me *****!! :P
Hey Steve by the way,whats the discount rate for a t25 oil feed kit.Pm me *****!! :P
04-11-2006, 10:01 AM
#82
1.0 BAR
Join Date: Oct 2005
Posts: 464
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Actually he was the 4th one. The one that jumped in the fire and was asking why it was so hot. :1
04-11-2006, 10:21 AM
#83
0.5 BAR
Join Date: Mar 2005
Location: mass
Posts: 166
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Originally Posted by ****
We just go to a local place called oil filter service and make them.
The issues we've had with the stealthmode products has been a huge pain in the ***. It's held us back from finishing this car 4 times now while we wait on stuff to be replaced or shipped again.
I think mike forgot to mention the problem, which was the return fitting on the turbo. Bolts were too small, and the holes in the fittings are of course going to be too small for the correct size bolt.
true, but at the same time, if you bought a complete oil line kit, why should you have to buy stuff...small point to be made. I think all-in-all the constant roadblock one oil line kit has been has just become too much of a huge pain in the ***.
3 block fittings, 1 feed line fitting, 1 return fitting, and two bolts later...we finally get a complete oil line set...i can understand the frustration.
yes it does say to go to 13 lb-ft...i was shocked really when it broke sooner, cause I usually tighten the ---- outta those things.
motor is a gsr block/b16 head and a t3/t04e sized similarly to an sc61. It's a garrett too, not some chinese ching chong ----.
The issues we've had with the stealthmode products has been a huge pain in the ***. It's held us back from finishing this car 4 times now while we wait on stuff to be replaced or shipped again.
I think mike forgot to mention the problem, which was the return fitting on the turbo. Bolts were too small, and the holes in the fittings are of course going to be too small for the correct size bolt.
true, but at the same time, if you bought a complete oil line kit, why should you have to buy stuff...small point to be made. I think all-in-all the constant roadblock one oil line kit has been has just become too much of a huge pain in the ***.
3 block fittings, 1 feed line fitting, 1 return fitting, and two bolts later...we finally get a complete oil line set...i can understand the frustration.
yes it does say to go to 13 lb-ft...i was shocked really when it broke sooner, cause I usually tighten the ---- outta those things.
motor is a gsr block/b16 head and a t3/t04e sized similarly to an sc61. It's a garrett too, not some chinese ching chong ----.
yea i had the same problem with the oil return fitting.. the bolts were to small and i had to drill out the fitting to have it fit the new bigger bolts.. but i didnt think such a small mod would make a bunch of guys who make turbo kits from junk yards mad.. i got the t3 kit from TT not stealth.. but i had the same problems
04-11-2006, 11:20 AM
#84
0.0 BAR
Thread Starter
Join Date: Feb 2004
Posts: 0
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Originally Posted by ssdelsolsi
but i didnt think such a small mod would make a bunch of guys who make turbo kits from junk yards mad..
you guys can bash me all you want. it doesnt make me sad. you can bash my setup all you want. it doesnt make me sad. its my weekend car that prolly costs more than 90 percent of your guys daily drivers that you struggle to pay for.
and for the guys that say i ordered the wrong kit. would you like a picture of the paypal receipt and all the paperwork the oil line it came with. i ordered a t3 kit.
now if some companies changed some stuff on their turbo. you would think that stealthmode would change his business to meet the requirments. nope instead he would rather still sell ---- that doesnt even fit the new ones. his website doesnt even have the option for the newer style t3's.
anyways go ahead and flame away. and have fun
04-11-2006, 11:29 AM
#85
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
me chinese, me play trick, me say you can suck my dick.
me chinese me play joke me put pee pee in your coke.
HAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAH Those are so corny but so funny! I can see that little chinese kid from Indiana Jones say that.
"Haha Mr Jones me chinese me play joke me put pee pee in your coke."
me chinese me play joke me put pee pee in your coke.
HAHAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAH Those are so corny but so funny! I can see that little chinese kid from Indiana Jones say that.
"Haha Mr Jones me chinese me play joke me put pee pee in your coke."
04-11-2006, 11:34 AM
#86
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Just wondering, did you have a problem with the oil line or just fitting? Cause I don't remember reading about the any problems with the oil lines but only the fitting but your title says oil lines. Hmmm I think you suck at hmmm everything you ------- stupid nignoob
04-11-2006, 11:37 AM
#87
3.0 BAR
Join Date: Jan 2004
Posts: 5,933
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
no comment 
04-11-2006, 12:29 PM
#88
3.0 BAR
Join Date: Jan 2004
Posts: 5,708
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Originally Posted by 88crex
you guys can bash me all you want. it doesnt make me sad. you can bash my setup all you want. it doesnt make me sad. its my weekend car that prolly costs more than 90 percent of your guys daily drivers that you struggle to pay for.
04-11-2006, 01:37 PM
#89
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Originally Posted by 88crex
yea maybe thats why i am mad. my ***** not ------ rigged from a junkyard. also yea something wasnt right about the fittings. and when one broke. i tried another. and then another. well finally i was sent the correct one and it worked. like i said. i cant say enough good things about the customer service from tunertoys. but stealthmode on the other hand. thats what i was mainly bitching about. i know ---- breaks. obviously something was wrong with the fittings if 3 broke in a row. **** and i even said they must have gotten a bad batch. we said that before i even e-mailed tunertoys.
you guys can bash me all you want. it doesnt make me sad. you can bash my setup all you want. it doesnt make me sad. its my weekend car that prolly costs more than 90 percent of your guys daily drivers that you struggle to pay for.
and for the guys that say i ordered the wrong kit. would you like a picture of the paypal receipt and all the paperwork the oil line it came with. i ordered a t3 kit.
now if some companies changed some stuff on their turbo. you would think that stealthmode would change his business to meet the requirments. nope instead he would rather still sell ---- that doesnt even fit the new ones. his website doesnt even have the option for the newer style t3's.
anyways go ahead and flame away. and have fun
you guys can bash me all you want. it doesnt make me sad. you can bash my setup all you want. it doesnt make me sad. its my weekend car that prolly costs more than 90 percent of your guys daily drivers that you struggle to pay for.
and for the guys that say i ordered the wrong kit. would you like a picture of the paypal receipt and all the paperwork the oil line it came with. i ordered a t3 kit.
now if some companies changed some stuff on their turbo. you would think that stealthmode would change his business to meet the requirments. nope instead he would rather still sell ---- that doesnt even fit the new ones. his website doesnt even have the option for the newer style t3's.
anyways go ahead and flame away. and have fun
then keep breaking off the wrong ones in it?
04-11-2006, 01:47 PM
#90
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: JUnkMOde Your oil lines SUCK!!!!!!!!!!!
Someone please lock this thing cause this guy keeps getting more stupid ever time he posts and Steve already clarrified everything. Damn Craig and his messup! To those that are actually using a torque wrench on these. Stop. Give it to someone and have them crack it over your head. 
--> 
-->
