|
Jan 13 2008-update on first poste -Green machine, high boost rice
Well I told u all I blew the bitch up :'( with a ---- tone of boost and a lot of tire smoke (and no oil because of a clogged oil pickup)
Well I had the TT rods resized New block and re filled bored out 30 over decked perfectly flat micropolished crank notched block all new race bearing speced out for each pleace in the engine, nothing standard all precision And friday the new custome made 9.0:1 flat top JE pistons just showed up. The bottem end will be together this week, now I have to decide whaqt Im going to do with the head. I think it will just be a stock rebuild with new valves and springs. [http://size=20pt]----------------------------------------------------------------------------------------------[/size]http://www.youtube.com/v/bJPg-xqyW40" this is the sticker it came with its ------- awsome http://img204.imageshack.us/img204/2521/dscf0022wo0.jpg then this is the new turbo http://img205.imageshack.us/img205/6507/dscf0014vc7.jpg and then this is the mani its going on http://img409.imageshack.us/img409/2407/dscf0023xx2.jpg :6update ok well some up date picks here after doing all this stuff to the bottem and I took the head into school to clean it up. After that I was looking at it a figured if I have pulled it apart to clean it I might as well do the valve seals, but If I do the valve seals I might aswell do a full valve job? So now am waiting for a head gasket kit. Acura wanted 7.86 or that a peice(X 16), ---- that. Kit off ebay comes with full head gasket set(including valve seals)for 50 shiped. http://img133.imageshack.us/img133/7781/dscf0069if4.jpg on top of that I was able to weld the steel to the cast housing some exspensive rods. pre-heated areas, welded, place fire blanket over after to keep the heat in. work perfect and bolted back to the turbo. befor http://img262.imageshack.us/img262/5310/dscf00101dx.jpg after http://img133.imageshack.us/img133/223/dscf0070qk2.jpg will make a nice mandrel 3" downpipe with the matching flange http://img261.imageshack.us/img261/3101/dscf0073gj3.jpg and the filled block http://img132.imageshack.us/img132/1127/dscf0072hn7.jpg march 26 update got my pro seal rings today aswell as my new tail lights http://img90.imageshack.us/img90/1135/dscf0079dt6.jpg http://img86.imageshack.us/img86/6650/dscf0080hl0.jpg update apr 20 engine is together now! :6 had to cut out a ---- load of block and even shave the turbo to make the Mack truck turbo fit and still keep the full size rad but we did it! hopefully will have it in the car next weekend and on the street in 2 or 3 weeks http://img337.imageshack.us/img337/1355/dsc00012vc2.jpg http://img62.imageshack.us/img62/411/dsc00030ec2.jpg http://img337.imageshack.us/img337/7135/dsc00031sg5.jpg http://img62.imageshack.us/img62/4853/dsc00027ik0.jpg http://img478.imageshack.us/img478/3121/dsc00022ad0.jpg http://img337.imageshack.us/img337/2813/dsc00021ms4.jpg http://img389.imageshack.us/img389/3531/dsc00015hv0.jpg http://img468.imageshack.us/img468/3986/dsc00014pm3.jpg update apr 29 Well we went to install the engine today and had nothing but problems. Joe started and ended the day doing the body work, hed did a realy good job so far. me, WOT, Rishis, josh went towork on the engine. got the cluctch setup in, its so tight its bending the bracket its atached to. tranny on and we got the coilovers in, engine n but not finished. it was a pretty good day all and all. at around 6pm I figured all the guy had worked there ass's off all day and where happy to do it so it was time for a brake. we hit up thease hardcore twisty roads, a good 40min drive through 40km turns at 120 in the 2 crx's and the sir hatchback. after a nice cruz through there WOT got into it with a built Type R(N/A built) and just wooped his ass. the guy was thinking WOT had a "K20 swap" but must off been put to shame finding out that it was just a b16a1. heres some pics http://img403.imageshack.us/img403/628/dscf0087ee5.jpg http://img82.imageshack.us/img82/9555/dscf0093gg0.jpg http://img402.imageshack.us/img402/2176/dscf0094jb9.jpg http://img168.imageshack.us/img168/7042/dscf0095rs1.jpg http://img168.imageshack.us/img168/2498/dscf0098ef2.jpg http://img82.imageshack.us/img82/3048/dscf0100zk6.jpg and the end of the day http://img82.imageshack.us/img82/3527/dscf0099zy7.jpg Thanks guys you all helped a lot update july 7 well this is the problem I never told anyone but I striped on of the head bolts in my build :'( I said ---- it Iv gone this far this bitch is gonna run, and she did just fine, untill I hit 11.5psi and the head gasket let go right where that bolt goes. so I pulled the head off and put in a helicoil and shes ready to go back together. I seen one on ebay for 90+20 shipping to canada but dont know if it will be here in time or if I should just do a copper spray again? guess I have no choice but to do the copper spray again JULY 17 2007 Well she was running and I did get a video of her running but its not the greatest (Will be here soon/today) I already changed the head gasket and put in 10 1/2" grade 11 capscrews to hold the head down and also uped the head TQ to 60ft/lbs from 47 all I have to do now is new plugs and re set the timming, and put the doors on and paint the bitch |
Re: heres my new x mas set up coming together
be carefull with that mani having to hold that hevy ass turbo.
looks good |
Re: heres my new x mas set up coming together
going to make a bracket off the block to hold the weight of the turbo(under the flange of the turbo)
|
Re: heres my new x mas set up coming together
how do you guys think it will run
fully built forged D16a1 with filled block low comp TT rods, je pistons, b series wrist pins this turbo and mani in a DOHC D series in my crx turbo has a 68 on the exh and a 1 on the other side looking at 20 to 30 psi at the track after a lot of tuning |
Re: heres my new x mas set up coming together
so you took the time to build a motor, and put the money in....and then you went and bought the cheapest chinese knockoff turbo parts you could find....good move.
|
Re: heres my new x mas set up coming together
yep cheap china, But I never knew that a mack truck turbo that runs for hundreds of thousands of miles made by a very long standing company that also suplys tanks with them was that cheap of a company :1
|
Re: heres my new x mas set up coming together
Originally Posted by FooK
so you took the time to build a motor, and put the money in....and then you went and bought the cheapest chinese knockoff turbo parts you could find....good move.
|
Re: heres my new x mas set up coming together
This is a remanufactured Schwitzer Turboconveyor made for Mack Trucks. The OEM part # is 7536-X194978.
the mani may be cheap but who caes once its rewelded and portmatched |
Re: heres my new x mas set up coming together
Originally Posted by Zeniceguycrx
yep cheap china, But I never knew that a mack truck turbo that runs for hundreds of thousands of miles made by a very long standing company that also suplys tanks with them was that cheap of a company :1
the turbo pic never loaded the first time i looked at the thread. i figured since you're a cheapass you ordered the good ole t3/t4 57 xspower gookboost turbo
Originally Posted by Zeniceguycrx
the mani may be cheap but who caes once its rewelded and portmatched
|
Re: heres my new x mas set up coming together
nope, I want my rex to run for the whole summer
|
Re: heres my new x mas set up coming together
what do you guys think of the trbo spes on this setup tho
68. and 1. |
Re: heres my new x mas set up coming together
Originally Posted by Zeniceguycrx
nope, I want my rex to run for the whole summer
|
Re: heres my new x mas set up coming together
When your turbo weighs 10x as much as your manifold does theres a problem.
I wouldn't trust that manifold with much more than a 14b really. And even then I'd be iffy. Sweet turbo though. |
Re: heres my new x mas set up coming together
Originally Posted by SinisterCRX
When your turbo weighs 10x as much as your manifold does theres a problem.
I wouldn't trust that manifold with much more than a 14b really. And even then I'd be iffy. Sweet turbo though. |
Re: heres my new x mas set up coming together
lol, true story
|
Re: heres my new x mas set up coming together
well as for boost i hope you plan on reving the ---- out of your motor. i'm guessing that you wont even start making boost till 6200ish. and hit your full boost at 7k. wich means you'll have to rap it to about 9k so you can stay in your boost range inbetween gears.
|
Re: heres my new x mas set up coming together
the turbo was pretty cheap
remand was 100us, shipping to canada as low as 29us. so you coud get one for about 120shiped in the us. The guy has more of them . go on ebay and search mack turboconveyor. I plan to shift at 8 to 8500. I thought for the price o big or go hme. |
Re: heres my new x mas set up coming together
Originally Posted by Zeniceguycrx
the turbo was pretty cheap
remand was 100us, shipping to canada as low as 29us. so you coud get one for about 120shiped in the us. The guy has more of them . go on ebay and search mack turboconveyor. I plan to shift at 8 to 8500. I thought for the price o big or go hme. you can send me the turbo and ill put it to use. |
Re: heres my new x mas set up coming together
Engine is built.
D16A1 I will try this and se how it goes, If it doesnt work the way I want it to I will of course put it in the hmt el cheapo for sale thread. of honda tech for 450 |
Re: heres my new x mas set up coming together
Originally Posted by Zeniceguycrx
Engine is built.
D16A1 I will try this and se how it goes, If it doesnt work the way I want it to I will of course put it in the hmt el cheapo for sale thread. of honda tech for 450 |
Re: heres my new x mas set up coming together
the worst part is even once the set up is done then I have to wait to finiish the body work and the car wont be out till the spring
|
Re: heres my new x mas set up coming together
you have cams or any head work ??? springs and retainers ???
stock d-series wont take 8500 i found out the hard way |
Re: heres my new x mas set up coming together
Originally Posted by jagojon3
Honestly, an HF is 3 times better. Statistically proven by statistics that prove it.
That is sig material right there. |
Re: heres my new x mas set up coming together
Originally Posted by bitchasscracker
you have cams or any head work ??? springs and retainers ???
stock d-series wont take 8500 i found out the hard way |
Re: heres my new x mas set up coming together
Originally Posted by Zeniceguycrx
This is a remanufactured Schwitzer Turboconveyor made for Mack Trucks. The OEM part # is 7536-X194978.
:P |
Re: heres my new x mas set up coming together
|
Re: heres my new x mas set up coming together
Im gonna make a brace that comes off the block and goes under the turbo flange and suports the weight.
The head will be port/polished, and if time and money permit it will have cams and spring. This is all costing a fair bit of money now so the head my only be rebuilt and P/P for the bigining of te summer |
Re: heres my new x mas set up coming together
So how are you going to connect the downpipe?
Any idea why the CHRA is so big? |
Re: heres my new x mas set up coming together
not sure yet
|
Re: heres my new x mas set up coming together
looking nice there Z. will ya let me drive it next time i come up there if you dont brake it by then?
|
Re: heres my new x mas set up coming together
down the track sure,
does anyone have ideas for connecting the down pipe to this? |
Re: heres my new x mas set up coming together
Originally Posted by FooK
one time, sinister installed a chinese turbo kit on a honda accord, it was a total failure...and thats about it.
But it does run! :P |
Re: heres my new x mas set up coming together
Im trying to find out more abou it, but I know for damn sure I aint running a 1/2" feeed and a 1" drain. I want some oil in my head.
Im thinking of puttin in a smaller drain and feed so the oil will fill the enter section, it looks to hold about 1/2 litre of oil |
Re: heres my new x mas set up coming together
Originally Posted by FooK
it wont, you'll blow it up.
|
Re: heres my new x mas set up coming together
Zeniceguycrx
3.0 BAR Posts: 2000 :o Happy 2000 posts, Nignog. |
Re: heres my new x mas set up coming together
no ----, not to bad
and ondaflow....Mine is bigger then yours and my turbos bigger to |
Re: heres my new x mas set up coming together
Where did you get that turbo? And how much?
|
Re: heres my new x mas set up coming together
ebay, rebuilt 0 miles you can win them for 100us and then shipping in the states is like 19$$$
search for mack turboconveyor or http://cgi.ebay.com/Turbocharger-Tur...QQcmdZViewItem |
Re: heres my new x mas set up coming together
schwitzer seems to be part of the borg warner group. Just like KKK are. That chra is huge!
|
Re: heres my new x mas set up coming together
little info I found once I got it is that its got a T3 flange
|
| All times are GMT -5. The time now is 01:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands