its my birthday bitches
#12
Re: its my birthday bitches
Originally Posted by highroller54
---- I thought you were banned already, I can hardly wait.
#16
Re: its my birthday bitches
Originally Posted by Zeniceguycrx
I hope someone helped u get that ------- car running for ur birthday
my car is gonna be down through the winter now, so im going to save up for S300 for fuel management and new injectors, after that EVERYTHING will be brand new and i'll be ------- amazed if it doesnt run, the ecu is already new but doesnt seem to like my car
#17
Re: its my birthday bitches
happy BURFFFFFFFF DAY, dan you car still not runnig ?? problems starting ?? what map sensor you runnig my roomates built z6 had a horrible time start do to a brand new xenocron 2.5 bar map senor .. swapped it out for a accel gm one and it started right up no problems but had to go through and re tune it !
#18
Re: its my birthday bitches
Originally Posted by ososlohatch
happy BURFFFFFFFF DAY, dan you car still not runnig ?? problems starting ?? what map sensor you runnig my roomates built z6 had a horrible time start do to a brand new xenocron 2.5 bar map senor .. swapped it out for a accel gm one and it started right up no problems but had to go through and re tune it !
it starts and all, but its rich as hell at idle, lean as hell above 2.5K (10AFRs and below at idle and 15-16 AFRs above 2.5K)
#20
Re: its my birthday bitches
wideband is brand new, unless i got a faulty sensor straight from the dealer
wideband is in the stock O2 position which is approximately the reccomended distance in the book i got with it (3" turbo back exhaust)
unless someone has a wideband or a ecu they can let me borrow to test mine i dunno what else it could be
i've replaced everything but the fuel filter, injectors, and ecu (ecu was bought new so technicaly i have)
i've replaced the wiring harness, all the wiring is right, the dizzy has 3 miles on it, fireing order is right, good spark, getting fuel, etc and timeing is dead on... unless the cam timeing is totaly fucked then im lost.. an i dont know exactly how to tell if my cam timeing is off, but i did what the book told me..
wideband is in the stock O2 position which is approximately the reccomended distance in the book i got with it (3" turbo back exhaust)
unless someone has a wideband or a ecu they can let me borrow to test mine i dunno what else it could be
i've replaced everything but the fuel filter, injectors, and ecu (ecu was bought new so technicaly i have)
i've replaced the wiring harness, all the wiring is right, the dizzy has 3 miles on it, fireing order is right, good spark, getting fuel, etc and timeing is dead on... unless the cam timeing is totaly fucked then im lost.. an i dont know exactly how to tell if my cam timeing is off, but i did what the book told me..