injector question: can i run Ford specific injectors in my Honda?
#1
injector question: can i run Ford specific injectors in my Honda?
i can get a deal on a set of Delphi 72lbs injectors (low impedence) but they are ment to be in a Ford.
i remember reading in the past that it had been done, but dont remember how, who did it, or where i had seen it. PLEASE help me out
i remember reading in the past that it had been done, but dont remember how, who did it, or where i had seen it. PLEASE help me out
#2
Re:injector question: can i run Ford specific injectors in my Honda?
You can run any injector, as long as you can make it seal on both ends, and the impedance is a match to your ECU and/or resistor box.
Just becaue it runs, doesn't mean the performance will be great though... Depending on the style of the injector, the duty cycles, and time to open/close may be quite different from the OEM injector.
<SPECULATION> I can't imagine that a big V8 injector has been designed to operate at as high a frequency (RPM) as a small import four banger. </SPECULATION>
Just becaue it runs, doesn't mean the performance will be great though... Depending on the style of the injector, the duty cycles, and time to open/close may be quite different from the OEM injector.
<SPECULATION> I can't imagine that a big V8 injector has been designed to operate at as high a frequency (RPM) as a small import four banger. </SPECULATION>
#3
Re:injector question: can i run Ford specific injectors in my Honda?
Originally Posted by TunerToys
You can run any injector, as long as you can make it seal on both ends...
as for performace of the injector...its an aftermarket performace/racing injector, so i would assume that its up to the task of taking a beating from a ricer Honda kid
#6
Re:injector question: can i run Ford specific injectors in my Honda?
first off why do you want ot run a 5.0L injector? they aren't that big if you want #24 aka 240cc injector go ahead but its not really going to do you any good. if you want a bit bigger size find a turbo coupe or an Xr4ti they are both 2.3L turbo motors and run #35 aka 350cc injectors. or you can find some Lighning one they are like #42's.
this is only true in the mazda based motors like the probe 2.2sohc and 2.5 v6 along with the escort 1.8L and a few others i don't know specs on.
NEUMAN
Originally Posted by ghettoturbo
im pretty sure ford=dsm
NEUMAN
#7
Re:injector question: can i run Ford specific injectors in my Honda?
Originally Posted by turbohf
i can get a deal on a set of Delphi 72lbs injectors (low impedence) but they are ment to be in a Ford.
i remember reading in the past that it had been done, but dont remember how, who did it, or where i had seen it. PLEASE help me out
i remember reading in the past that it had been done, but dont remember how, who did it, or where i had seen it. PLEASE help me out
#8
Re:injector question: can i run Ford specific injectors in my Honda?
Originally Posted by neuspeedescort
first off why do you want ot run a 5.0L injector? they aren't that big if you want #24 aka 240cc injector go ahead but its not really going to do you any good. if you want a bit bigger size find a turbo coupe or an Xr4ti they are both 2.3L turbo motors and run #35 aka 350cc injectors. or you can find some Lighning one they are like #42's.
this is only true in the mazda based motors like the probe 2.2sohc and 2.5 v6 along with the escort 1.8L and a few others i don't know specs on.
NEUMAN
Originally Posted by ghettoturbo
im pretty sure ford=dsm
NEUMAN
BTW... to get from LB/HR to CC/MIN you multiply by 10.5. So 24# is 252cc, 35# is 367cc... dipshit.
Just ------' with ya.
Your VW buddy... Aaron.
#9
Re:injector question: can i run Ford specific injectors in my Honda?
my bad i missed this part....
say Ford 5.0/4.6L style injector to fit a B16A
so if they fit go for it.
you could always try to find a wrecked gen3 rx7. there secondary injectors ar 720's. but there are only 2 of them.
NEUMAN
say Ford 5.0/4.6L style injector to fit a B16A
so if they fit go for it.
you could always try to find a wrecked gen3 rx7. there secondary injectors ar 720's. but there are only 2 of them.
NEUMAN
#10
Re:injector question: can i run Ford specific injectors in my Honda?
get some dsm 450s' they're 40-$50 in www.dsmtrader.com or on ebay. unless you can get the ford ones for free and it can be done.