HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   I Might As Well Introduce Myself and My Car (https://www.homemadeturbo.com/general-discussion-6/i-might-well-introduce-myself-my-car-54553/)

TurboEco 01-24-2006 11:54 PM

I Might As Well Introduce Myself and My Car
 
My name is phil and I am 23, as well as a recent graduate of college, moving into a new place this weekend..

car is a 2002 chevrolet cavalier with the ecotec motor and a custom turbo kit, not home made but I and my roomate have done a lot of work to the car including swapping manifold gasket, turbo to manifold gasket, and changing the charge pipes around and a lot of little things that have helped me learn a decent amount.

right now the car runs about 10 psi and backs off to 8.7 (wg spring, small blue) because of a blown turbo to manifold gasket. Main problem is the bolts holding my turbo on keep backing off, tried loc-tite and a few other things. (any suggestions) after the pics I will post a current mod list. I plan on painting the car all black again, building the motor and throwing a Quiafe lsd in the tranny to go along with my current dss stage 2 axles. well onto the pics

(disclaimer: one of the welds on my charge pipes was cracked and I put the duct tape on there to test to see if it was leaking boost and indeed it is, once we get setting into our new place I will be cutting the charge pipe and putting in a coupler and t-bolt clamps.)

http://img402.imageshack.us/img402/7479/dsc005990zi.jpg

http://img402.imageshack.us/img402/8190/dsc006006or.jpg

http://img402.imageshack.us/img402/5840/dsc006011zl.jpg

http://img402.imageshack.us/img402/6150/dsc006030lm.jpg

http://img402.imageshack.us/img402/1739/dsc006054ws.jpg

This is the new 3 inch exhaust

http://img402.imageshack.us/img402/8093/dsc005962nt.jpg

Bored 1 day and decided to drop 3 gears standing still.. I think it turned out nice ;D

http://img402.imageshack.us/img402/9652/dsc006065ds.jpg

http://img402.imageshack.us/img402/9193/dsc006119bi.jpg

and here is a small video

(note: the end mods arent upto date, I HAD the 3 inch side exit on, now it's off and the full catback is on, safc II I sold for MegaSquirt, I am getting a different fuel pump not the walbro, I think thats it)

http://media.putfile.com/Accelerate47

* Car Customs Upper Motor Mount
* Car Customs Lower Motor Mount
* Spec Aluminum Flywheel
* Spec Stage III Clutch
* Rk Sport underdrive Pulley
* Ac Eliminated
* Cruise Control Elminated
* RSM 62mm TB
* Cartech BEGI FMU
* Aeromotive AFPR
* Custom 2002 Fuel Rail
* Saab 370cc Injectors
* CNFX Turbo Manifold
* CNFX 2.5 Inch SS Downpipe
* CNFX Charge Pipes
* Turbonetics T3/T4 Turbo
* .48 a/r 50 trim (exhaust)
* 5o trim stage 3 wheel on intake side
* Big shaft upgrade
* Tial 38mm Wastegate
* MSD 62112 Box
* MSD Coils
* MSD Coilpacks
* MSD 8.5mm Super Conductor Wires
* Custom Tubes Inc 3 Inch Catback mandrel bent
* 2.5 Inch Cat Delete Pipe
* 02 Simulator
* HBC In car Boost Controller
* Turbonetics T-bolt Cuppler Clamps
* Johnny Race Car 6 Inch Intercooler
* Greddy Type S Blow Off Valve
* Optima Yellow Top Battery (trunk


Well I am sure some will flame, go ahead.. it's a work in progress just like anything else...


88dx 01-24-2006 11:58 PM

Re: I Might As Well Introduce Myself and My Car
 
Cool setup :y

Minor Threat 01-25-2006 12:01 AM

Re: I Might As Well Introduce Myself and My Car
 
We need better videos.

Any idea what the car is running time wise/power output?

USS 01-25-2006 12:02 AM

Re: I Might As Well Introduce Myself and My Car
 
Nice ---- man, I like it

TurboEco 01-25-2006 12:05 AM

Re: I Might As Well Introduce Myself and My Car
 

Originally Posted by Minor Threat
We need better videos.

Any idea what the car is running time wise/power output?

power output is 233 whp and 247 tq

time wise I am sure it is capable of very very low 13's if not high 12's

(assuming that I base my guesses of what cavaliers of simliar power are running, am I in NO way say that I will run that)

vsm98civic 01-25-2006 12:05 AM

Re: I Might As Well Introduce Myself and My Car
 
not one for cavaliers but clean setup

TurboEco 01-25-2006 12:08 AM

Re: I Might As Well Introduce Myself and My Car
 

Originally Posted by vsm98civic
not one for cavaliers but clean setup

suprising you said clean lol... msot people say it is really messy... this new place has a garage so we will be able to take the whole thing apart and re do everything really nicely, since I can walk to work...

Minor Threat 01-25-2006 12:09 AM

Re: I Might As Well Introduce Myself and My Car
 

Originally Posted by TurboEco
power output is 233 whp and 247 tq

time wise I am sure it is capable of very very low 13's if not high 12's

(assuming that I base my guesses of what cavaliers of simliar power are running, am I in NO way say that I will run that)

Ahh to make more torque than horsepower...

70Challenger 01-25-2006 12:38 AM

Re: I Might As Well Introduce Myself and My Car
 
Pretty clean, be sure to keep the videos coming too

SkunT 01-25-2006 12:41 AM

Re: I Might As Well Introduce Myself and My Car
 
not a bad set-up although i think i would loose that duct-tape coupler.

http://img402.imageshack.us/img402/6150/dsc006030lm.jpg

I also see you got almost 40 posts in less than 24hours. your doin great!
your taillights are gay to.



All times are GMT -5. The time now is 10:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands