I got the comp. tester stuck (I GOT IT MORE STUCK)
I got the adapter piece of a compression tester stuck in cyl. #1 there is a hex nut on the outside of it, but the socket for that size will not fit in the spark plug tube. all there is is the female threads of the adapter to work with. any suggestions on getting it out?
BTW my compression was 185, 184, 177, 190 the standard is 184 should #1 and #4 be a problem? why would the compression be HIGHER then normal? (read the update) |
Re:I got the comp. tester stuck
Dude how did you get it stuck :-X wow never hear of this before, just twist as hard as you can :-\
steve |
Re:I got the comp. tester stuck
hahaha, isn't that steve comp tester :-X
|
Re:I got the comp. tester stuck
I have done this b4. Im pretty sure I found a long screwdriver that jammed into it well, and slowly unscrewed it.
Good luck |
Re:I got the comp. tester stuck
Ok, you could apply some sort of thread locker to the threads of the hose piece of the compression tester, then screw it into the adapter piece. Wait a little bit and slowly twist it out.
|
Re:I got the comp. tester stuck
Originally Posted by quadnie
Ok, you could apply some sort of thread locker to the threads of the hose piece of the compression tester, then screw it into the adapter piece. Wait a little bit and slowly twist it out.
|
Re:I got the comp. tester stuck
btw compression #'s look fine.
|
Re:I got the comp. tester stuck
Originally Posted by sohcrxsi
Originally Posted by quadnie
Ok, you could apply some sort of thread locker to the threads of the hose piece of the compression tester, then screw it into the adapter piece. Wait a little bit and slowly twist it out.
-Tim |
Re:I got the comp. tester stuck
Originally Posted by AgentMurdoc
hahaha, isn't that steve comp tester :-X
Originally Posted by quadnie
Ok, you could apply some sort of thread locker to the threads of the hose piece of the compression tester, then screw it into the adapter piece. Wait a little bit and slowly twist it out.
carbon build up for that high CR? |
Re:I got the comp. tester stuck
you obviously went in more than 2 or 3 turns :)
i did the same thing 2 weeks ago, the screwdriver trick worked for me. |
All times are GMT -5. The time now is 04:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands