I f'ed up big time.....Need opinions
Ok so i was putting together an LS tonight, totally stock motor.... I Was taking out the headbolts one by one and replacing with ARP's. That went over smooth and then I took off the cam gears. Well I was drinking and talking with friends and one of the cam gear keys/keepers fell into the bottom of the timing cover! So I was trying to get the crank pully off and long story short the bottom end turned and the cams didn't. So basically I'm wondering if the bottom end turned almost a full revolution with the cams at TDC, do you guys think it would bend the valves? I'm hoping not, only because the low compression of the LS motor, I thought There may be enough clearance for it to happen? I just want opionions.... TIA!
|
Re: I f'ed up big time.....Need opinions
id be willing to bet you'll be ok.
id risk it, slap it all together and see what happens. |
Re: I f'ed up big time.....Need opinions
put the motor to TDC, put the cams straght up
put thebelt on easier than fuckign your motor up |
Re: I f'ed up big time.....Need opinions
Originally Posted by FooK
id be willing to bet you'll be ok.
id risk it, slap it all together and see what happens. The build should be lots of fun, I picked up a 93 LS tranny with a quaife LSD for $650 today, 0 miles since rebuild, I think thats a steal since the LSD is a grand alone lol :) |
Re: I f'ed up big time.....Need opinions
do a leakdown test and that should tell you for sure, but other than that, I think you're just drunk and worried for no reason. lol ;D
|
Re: I f'ed up big time.....Need opinions
Originally Posted by Stealthmode
do a leakdown test and that should tell you for sure, but other than that, I think you're just drunk and worried for no reason. lol ;D
|
Re: I f'ed up big time.....Need opinions
dude if you were turining the motor over by hand, you would feel if a valve hit a piston. I t would be basically a dead stop. you should be cool
|
Re: I f'ed up big time.....Need opinions
Originally Posted by fork
dude if you were turining the motor over by hand, you would feel if a valve hit a piston. I t would be basically a dead stop. you should be cool
|
Re: I f'ed up big time.....Need opinions
Originally Posted by fork
dude if you were turining the motor over by hand, you would feel if a valve hit a piston. I t would be basically a dead stop. you should be cool
|
Re: I f'ed up big time.....Need opinions
you would feel the resistance of metal on metal before the valve bent. lets just hope you werent too drunk to notice
|
All times are GMT -5. The time now is 01:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands