i cut my injector wires HELP
 

how do i tell which wire goes to which injector, i cut them to put resistors in and i cut them all at once. help me out yeah i know it was stupid you dont have to tell me twice

Re:i cut my injector wires HELP
 

the black and yellow ones don't matter. they can go to any.

what car is this for?

Re:i cut my injector wires HELP
 

read the dam manual and trace that ----, and figure it out. electrical is a real pain in the ass. :-\


chapter 4 of the haynes manual might help you out. :-\

Re:i cut my injector wires HELP
 

so is doesnt matter which wire goes to where since the power is constant right? and the other wire regulates whether the injector sees ground and fires?

Re:i cut my injector wires HELP
 

right. the black and yellow all go to the power distribution block. i assume those are the wires you cut.

Re:i cut my injector wires HELP
 

kick ass, thanks

Re:i cut my injector wires HELP
 

well.. if you cut the injector wires at the same time.. each one would be a different length. sometimes this helps to match them up when you are working with more than one wire of the same color...

but then again, if you have it solved.. there is no need for this.

Re:i cut my injector wires HELP
 

backtrack
did you cut the wires at the distribution block?
and you only cut 4 wires?

Re:i cut my injector wires HELP
 

ummmmm, either way, the power wires don't matter (yellow w/black stripe) and the other wires are all a different color (red, brown,blue and yellow) as long as you're not color blind, you should be fine ::)

Re:i cut my injector wires HELP
 

dumbass.