HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   i cut my injector wires HELP (https://www.homemadeturbo.com/general-discussion-6/i-cut-my-injector-wires-help-28229/)

Scottsi 10-16-2004 06:19 PM

i cut my injector wires HELP
 
how do i tell which wire goes to which injector, i cut them to put resistors in and i cut them all at once. help me out yeah i know it was stupid you dont have to tell me twice

whiterice 10-16-2004 06:22 PM

Re:i cut my injector wires HELP
 
the black and yellow ones don't matter. they can go to any.

what car is this for?

SkunT 10-16-2004 06:23 PM

Re:i cut my injector wires HELP
 
read the dam manual and trace that ----, and figure it out. electrical is a real pain in the ass. :-\


chapter 4 of the haynes manual might help you out. :-\

Scottsi 10-16-2004 06:26 PM

Re:i cut my injector wires HELP
 
so is doesnt matter which wire goes to where since the power is constant right? and the other wire regulates whether the injector sees ground and fires?

whiterice 10-16-2004 06:28 PM

Re:i cut my injector wires HELP
 
right. the black and yellow all go to the power distribution block. i assume those are the wires you cut.

Scottsi 10-16-2004 06:31 PM

Re:i cut my injector wires HELP
 
kick ass, thanks

rollmodel 10-16-2004 06:35 PM

Re:i cut my injector wires HELP
 
well.. if you cut the injector wires at the same time.. each one would be a different length. sometimes this helps to match them up when you are working with more than one wire of the same color...

but then again, if you have it solved.. there is no need for this.

whiterice 10-16-2004 06:37 PM

Re:i cut my injector wires HELP
 
backtrack
did you cut the wires at the distribution block?
and you only cut 4 wires?

projekteg 10-18-2004 06:33 AM

Re:i cut my injector wires HELP
 
ummmmm, either way, the power wires don't matter (yellow w/black stripe) and the other wires are all a different color (red, brown,blue and yellow) as long as you're not color blind, you should be fine ::)

kain 10-18-2004 07:33 AM

Re:i cut my injector wires HELP
 
dumbass.

Scottsi 10-18-2004 10:27 AM

Re:i cut my injector wires HELP
 
shut the ---- up kain you worthless piece of ----, you had nothing to do with this thread so keep the ---- out of it.

projekteg 10-18-2004 10:53 AM

Re:i cut my injector wires HELP
 

Originally Posted by Scottsi
shut the ---- up kain you worthless piece of ----, you had nothing to do with this thread so keep the ---- out of it.

pwnd (again) ;D

bambooseven 10-18-2004 01:35 PM

Re:i cut my injector wires HELP
 
look up your ecu pinout and do a continuity check from the ecu pins to the wires, can't get easier then that. (well besides not having cut all the wires at once)

projekteg 10-18-2004 01:37 PM

Re:i cut my injector wires HELP
 

Originally Posted by bambooseven
look up your ecu pinout and do a continuity check from the ecu pins to the wires, can't get easier then that. (well besides not having cut all the wires at once)

doing a continuity check from one point in the car to another point under the hood is easier matching 4 different colored wires right in front of your face under the hood ???

Project CRXtacy 10-18-2004 02:57 PM

Re:i cut my injector wires HELP
 
brown = injector 1
red = injector 2
bitch baby blue = injecter 3
type r yellow (hah) = injector 4

jeez im lame )= oh well hope this helpz yah scott cuz you know the rest of the other wires


All times are GMT -5. The time now is 02:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands