HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   hw-itb (https://www.homemadeturbo.com/general-discussion-6/hw-itb-25131/)

EGYSOL 08-20-2004 09:40 AM

hw-itb
 
if i want to make athe hw-itb https://www.homemadeturbo.com/tech_p...itb/index.html
what do i need to upgrade in my engine it's a stock b16a2

projekteg 08-20-2004 09:46 AM

Re:hw-itb
 
nothing internally, just do as the write up says, you may want to get a vafc or some way to tune it

SkunT 08-20-2004 10:09 AM

Re:hw-itb
 
accually i just completed a HMT ITB set-up on a B16. it was very very simple, and no tuning was required. we also used honda 954 throttle bodies, which was in a sense a plug and play system. if you need any furthrur help, ask.

but, yeah, most everything you need to know is in the link above. the MAP sensor is plug and play, if you use honda TB. BTW, we did also make our own manifold. the stock IM worked, but we had a SMALL vacume leak. nothing big, but it was minor. we just tried to perfect it a little with the homemade manifold.

projekteg 08-20-2004 10:11 AM

Re:hw-itb
 
no tuning is required, but to get the pull potential of the itb's you would want to get it tuned, it's taking in a lot more air than your regular cai.

SkunT 08-20-2004 10:30 AM

Re:hw-itb
 

Originally Posted by projekteg
no tuning is required, but to get the pull potential of the itb's you would want to get it tuned, it's taking in a lot more air than your regular cai.


yeah, your right, but my point was no tuning was really necessary. It did run a little rich, but it wasnt to much. We didnt hook any A/F meters on it, but it seemed to run just fine.


I had a D16 ITB set-up that was almost complete....long story. :'(

88dx 08-20-2004 01:01 PM

Re:hw-itb
 
If I was going to do a ITB setup on my b16 i would put a set of ITR cam's in. It would make for a decent All motor setup.
steve

SkunT 08-20-2004 01:48 PM

Re:hw-itb
 

Originally Posted by 88dx
If I was going to do a ITB setup on my b16 i would put a set of ITR cam's in. It would make for a decent All motor setup.
steve


steve. i have been told and read many times that ITR cams are useless unless you have the valve train to go with them.

juli0_bustamante 08-20-2004 01:52 PM

Re:hw-itb
 
im gonna have to punk some frona bike next time i go to the junk yard... ;D

88dx 08-20-2004 01:59 PM

Re:hw-itb
 
Lots of people make good power with ITR cams and stock valve train. ITR cams arnt aggressive enough to need aftermarket valve train.
steve

SkunT 08-20-2004 02:05 PM

Re:hw-itb
 
here was my ITB set-up.

https://www.homemadeturbo.com/forum/...8150#msg248150

I had in it what I sold it for.

I think was $150, dont remeber.....

I got the ITB's from Ebay, everything else came from Napa.
I had the honda CBR600 F4i throttle bodies.


edit
check out my HM vacume log...LOL. it was ghetto, but worked exelent!


All times are GMT -5. The time now is 12:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands