How much power u guys getting from your D16 turbo's?
Hi Guys,
Just wondering at the power outputs you guys were getting with your D16 (mainlly ZC) setups. Also I know this is a vauge sort of question but i'm curious. I have a D16ZC which has been completely rebuilt. Any part which was out side manufacturer spec was changed as well as running a 11lb flywheel and completely balanced bottom end. The HG is going to get replaced with a uprated one as well as ARP head bolts. The compression ratio is aproximately 9.5:1. I will be using an SAFC-II along with prelude 345cc injectors. My question is aproximately how much power can you obtain on such a setup running at 8psi (intercooled)? Thanks. |
Re:How much power u guys getting from your D16 turbo's?
What kind of rods?
Forged or cast pistons? Lots of stock (internals) ZC's are getting 160-190ish to the wheels 7-10psi. I'am going for mid 300's with my built ZC... Jeff |
Re:How much power u guys getting from your D16 turbo's?
Abaz,
Stock internals. My goal is 200hp at the flywheel, then when i get bored dump the setup for a fully build B16 t urbo set up ;D Many people get 200 at the flywheel with a zc? Thanks |
Re:How much power u guys getting from your D16 turbo's?
so far i have gotten 302hp 251tq from my stock internal sohc motor :)
|
Re:How much power u guys getting from your D16 turbo's?
Originally Posted by BoostedED9
so far i have gotten 302hp 251tq from my stock internal sohc motor :)
you are the only exception.. ;) |
Re:How much power u guys getting from your D16 turbo's?
lol
|
Re:How much power u guys getting from your D16 turbo's?
Originally Posted by BoostedED9
so far i have gotten 302hp 251tq from my stock internal sohc motor :)
|
Re:How much power u guys getting from your D16 turbo's?
440's (some say they are 430's) vafc and a fpr.
|
Re:How much power u guys getting from your D16 turbo's?
How u doin that w/ stock internals?
|
Re:How much power u guys getting from your D16 turbo's?
Originally Posted by BoostedED9
so far i have gotten 302hp 251tq from my stock internal sohc motor :)
|
All times are GMT -5. The time now is 03:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands