HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   How much power u guys getting from your D16 turbo's? (https://www.homemadeturbo.com/general-discussion-6/how-much-power-u-guys-getting-your-d16-turbos-2659/)

cel_912 03-09-2003 03:20 PM
How much power u guys getting from your D16 turbo's?
 
Hi Guys,

Just wondering at the power outputs you guys were getting with your D16 (mainlly ZC) setups.

Also I know this is a vauge sort of question but i'm curious. I have a D16ZC which has been completely rebuilt. Any part which was out side manufacturer spec was changed as well as running a 11lb flywheel and completely balanced bottom end. The HG is going to get replaced with a uprated one as well as ARP head bolts. The compression ratio is aproximately 9.5:1. I will be using an SAFC-II along with prelude 345cc injectors.

My question is aproximately how much power can you obtain on such a setup running at 8psi (intercooled)?

Thanks.

HMT-Admin 03-09-2003 03:33 PM
Re:How much power u guys getting from your D16 turbo's?
 
What kind of rods?

Forged or cast pistons?

Lots of stock (internals) ZC's are getting 160-190ish to the wheels

7-10psi.

I'am going for mid 300's with my built ZC...

Jeff

cel_912 03-09-2003 03:38 PM
Re:How much power u guys getting from your D16 turbo's?
 
Abaz,

Stock internals.

My goal is 200hp at the flywheel, then when i get bored dump the setup for a fully build B16 t urbo set up ;D

Many people get 200 at the flywheel with a zc?

Thanks

BoostedED9 03-09-2003 03:54 PM
Re:How much power u guys getting from your D16 turbo's?
 
so far i have gotten 302hp 251tq from my stock internal sohc motor :)

HMT-Admin 03-09-2003 03:59 PM
Re:How much power u guys getting from your D16 turbo's?
 
Originally Posted by BoostedED9
so far i have gotten 302hp 251tq from my stock internal sohc motor :)

you are the only exception.. ;)

BoostedED9 03-09-2003 05:04 PM
Re:How much power u guys getting from your D16 turbo's?
 
lol

TurboEF9 03-09-2003 05:29 PM
Re:How much power u guys getting from your D16 turbo's?
 
Originally Posted by BoostedED9
so far i have gotten 302hp 251tq from my stock internal sohc motor :)
Ya.. you don't count! ..BTW, what fuel management are you running that crazy time bomb on?

BoostedED9 03-09-2003 06:11 PM
Re:How much power u guys getting from your D16 turbo's?
 
440's (some say they are 430's) vafc and a fpr.

Turbodelsolman 03-10-2003 02:09 PM
Re:How much power u guys getting from your D16 turbo's?
 
How u doin that w/ stock internals?

RENR 03-10-2003 02:41 PM
Re:How much power u guys getting from your D16 turbo's?
 
Originally Posted by BoostedED9
so far i have gotten 302hp 251tq from my stock internal sohc motor :)
wow!! is that thing daily driven???? :o

TurboEF9 03-10-2003 02:42 PM
Re:How much power u guys getting from your D16 turbo's?
 
Race gas, and good ignition..

BoostedED9 03-14-2003 06:38 PM
Re:How much power u guys getting from your D16 turbo's?
 
110 octane, and balls of steel..hehe... it got driven around town every now and hten but now it is done for... for some reason the rod snapped when i went over 20+psi

Semnos 03-14-2003 06:52 PM
Re:How much power u guys getting from your D16 turbo's?
 
For some reason????
hahhahahahah
You're funny
Those rod's should have snapped ever since you put more then 12 psi on them..

BoostedED9 03-14-2003 06:55 PM
Re:How much power u guys getting from your D16 turbo's?
 
well i guess you need to quit believing the internet and try things for yourself... the reason i did this is to proove that they cna hadle some beating as well as make power...

Semnos 03-14-2003 07:09 PM
Re:How much power u guys getting from your D16 turbo's?
 
True that.
That's why I'm going to try it out too


All times are GMT -5. The time now is 11:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands