How do I get ahold of st00pidfast?
10-24-2007, 06:26 PM
#21
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re: How do I get ahold of st00pidfast?
Originally Posted by b18civicEF
Ok well I was thinkin something like 660's but thats another note now, cause they are now saying they cant tune obd0 and want to charge me 1,000 to convert it to obd1 and then they could tune the obd1. This sucks, I didnt know obd0 is much harder than obd1 to tune. If someone could give me some pointers and such I could do it myself. But I would have many ?'s lol. well I have a basemap coming in from xeno anytime now so all I need is a damn tune! well then Im gonna stick with around 270whp to keep my mind at ease. Ill be all paranoid driving and thinkin Im gonna blow it up lol. Im here at work right now are there any good sites to help me understand TE or BRE better?
I can see a shop charging somewhat near that amount but obviously with HMT is doesnt cost that much if you do it yourself.
Drive it to North Carolina and have JD hook it up with a little BRE action
10-24-2007, 09:56 PM
#23
1.0 BAR
Thread Starter
Join Date: May 2007
Posts: 233
Re: How do I get ahold of st00pidfast?
Originally Posted by xenocron
Does the $1000 include tuning with OBD0?
I can see a shop charging somewhat near that amount but obviously with HMT is doesnt cost that much if you do it yourself.
Drive it to North Carolina and have JD hook it up with a little BRE action
I can see a shop charging somewhat near that amount but obviously with HMT is doesnt cost that much if you do it yourself.
Drive it to North Carolina and have JD hook it up with a little BRE action
Yes the 1,000 is supposed to be tunning too. Ive been reading and tryin to figure tunning out myself but its not for me. SNAP!, Im going to north carolina here in a couple weeks too! but he the only bad part is its 1,100 miles and Im not taking my hatch.
.
10-25-2007, 04:07 AM
#26
1.0 BAR
Thread Starter
Join Date: May 2007
Posts: 233
Re: How do I get ahold of st00pidfast?
I will link the vid when I get home, if its the right one lol. its one of a k20 getting raped with really high boost and blows up on the dyno. I cant get on the vids here at work.
10-25-2007, 01:43 PM
#27
0.0 BAR
Join Date: May 2006
Posts: 28
Re: How do I get ahold of st00pidfast?
jason tuned my gsr and it still runs great. hes tuned all of my friends cars and not one has blow up. in the video he pushed the stock k24.
hes a list of their set ups
stock gsr sc50, inline pro,ebay intercooler- 333hp@15psi
stock gsr(122k) sc34, inline pro,precison 600hp ic, skunk2 im- 356hp@12psi
stock b16(180k) gt3076r, inline pro, precison 650ic,3ic charge pipe- 309@10psi (wreaked)
stock gsr-.48 trim,ebay ic,blox im, 70mm tb,ebay manifold-303@12psi
stock b16 greddy kit with AIR im - 300@10psi
stock ls rev hard kit- 290@16psi
stock ls inline pro-.48 trim-324@16psi
built motors now
84mm endyn pistons (9.8:1) gsr endyn head ctr cams jg im, top mount 67p shousing 682@23psi
81.5 (9:1) itr cams, stock head, ineedhelp top mount,sc61e 634@25psi
81.5 9:1 stock gsr head, ineedhelp top mount,sc61s 456@18psi 93 pump
84.5 endyn pistions(9.8:1) si endyn head, gsr cams, jg im, full race ram horn (turbo?) 601@25psi
all of our cars are still running storng but the ls with rev hard kit is in the body shop, lady ran a stop lightand the gt3076r si that was wreaked.
hes a list of their set ups
stock gsr sc50, inline pro,ebay intercooler- 333hp@15psi
stock gsr(122k) sc34, inline pro,precison 600hp ic, skunk2 im- 356hp@12psi
stock b16(180k) gt3076r, inline pro, precison 650ic,3ic charge pipe- 309@10psi (wreaked)
stock gsr-.48 trim,ebay ic,blox im, 70mm tb,ebay manifold-303@12psi
stock b16 greddy kit with AIR im - 300@10psi
stock ls rev hard kit- 290@16psi
stock ls inline pro-.48 trim-324@16psi
built motors now
84mm endyn pistons (9.8:1) gsr endyn head ctr cams jg im, top mount 67p shousing 682@23psi
81.5 (9:1) itr cams, stock head, ineedhelp top mount,sc61e 634@25psi
81.5 9:1 stock gsr head, ineedhelp top mount,sc61s 456@18psi 93 pump
84.5 endyn pistions(9.8:1) si endyn head, gsr cams, jg im, full race ram horn (turbo?) 601@25psi
all of our cars are still running storng but the ls with rev hard kit is in the body shop, lady ran a stop lightand the gt3076r si that was wreaked.
10-25-2007, 06:53 PM
#28
1.0 BAR
Thread Starter
Join Date: May 2007
Posts: 233
Re: How do I get ahold of st00pidfast?
Well I talked to chris delgado, he also said its best to convert to obd1 cause he and other he knows dont mess with obd0. so Im converting over to obd1 and getting 660's he said its gonna cost around $450. And 350hp on my b16. cross your fingers I hope this goes through, he said they have a guy that goes to the dyno EVERY weekend and makes it hard for anyone else to make app so they gotta res a spot pretty early.thanks for the help everyone and thanks for the info JD.
10-25-2007, 07:27 PM
#29
1.5 BAR
Join Date: Feb 2006
Posts: 778
Re: How do I get ahold of st00pidfast?
i'm in arlington though never been to a dyno.... i think Redline off copper has a dyno and forsurly Alamo autosports http://www.alamoautosports.com/
10-25-2007, 11:19 PM
#30
1.5 BAR
Join Date: Oct 2005
Posts: 1,162
Re: How do I get ahold of st00pidfast?
Originally Posted by b18civicEF
I will link the vid when I get home, if its the right one lol. its one of a k20 getting raped with really high boost and blows up on the dyno. I cant get on the vids here at work.
