i just got a set of 450s i wondering how should i go about cleaning them? thanks

 

Step 1: Post in the correct forum.

Step 2: ??

Step 3: Injectors are finally clean.

 

slap them in and go
---- cleaning them this is hmt

 

word..


but someone on here did a nice l;ittle write-up on how he did it with like a tire pump or some ---- like that. maybe the guy will chime in whoever did it.

 

I did it once with a small pressure tank, put a bottle of redex in it and filled up with white spirit. Then I hooked it to the air compressor and one injector at a time with a fuel filter before the injector and then I connected power to the injector, I pulsed the injector manually by touching the wire against the terminal on my power supply. If I'd do it again I'd use an oscillator.
I drove the mixture through the injectors in both directions and once the tank was empty I'd let the injectors run on air for a few seconds and then go pour out of the glass jar I used for catching the stream back into the pressure tank.
It seemed to work out really well, I at least collected some dirt on the bottom of the jar.

 

i think im gonna get a bottle of injector cleaner and dump it in to a ultrasonic cleaner and dropp my 450s in what do u think

 

I think you think your injectors are worth more than they do.
Just runem

 

Wipe them off with a rag and slap them bitches in

 

I remember that, it was a long time ago...something about hooking them up to a powersource to keep them open and then hooking up a tube to each one and pressuring some sort of cleaner through each injector...I forgot who posted it though, like I said, it was at least 2 years ago as I recall.

 

He was using a 9 volt battery and a can of injector cleaner