how to clean injectors
i just got a set of 450s i wondering how should i go about cleaning them? thanks
|
Re: how to clean injectors
Step 1: Post in the correct forum.
Step 2: ????? Step 3: Injectors are finally clean. |
Re: how to clean injectors
slap them in and go
---- cleaning them this is hmt |
Re: how to clean injectors
Originally Posted by hotrex
slap them in and go
---- cleaning them this is hmt but someone on here did a nice l;ittle write-up on how he did it with like a tire pump or some ---- like that. maybe the guy will chime in whoever did it. |
Re: how to clean injectors
I did it once with a small pressure tank, put a bottle of redex in it and filled up with white spirit. Then I hooked it to the air compressor and one injector at a time with a fuel filter before the injector and then I connected power to the injector, I pulsed the injector manually by touching the wire against the terminal on my power supply. If I'd do it again I'd use an oscillator.
I drove the mixture through the injectors in both directions and once the tank was empty I'd let the injectors run on air for a few seconds and then go pour out of the glass jar I used for catching the stream back into the pressure tank. It seemed to work out really well, I at least collected some dirt on the bottom of the jar. |
Re: how to clean injectors
i think im gonna get a bottle of injector cleaner and dump it in to a ultrasonic cleaner and dropp my 450s in what do u think
|
Re: how to clean injectors
I think you think your injectors are worth more than they do.
Just runem |
Re: how to clean injectors
Wipe them off with a rag and slap them bitches in :y
|
Re: how to clean injectors
Originally Posted by crx2fast
word..
but someone on here did a nice l;ittle write-up on how he did it with like a tire pump or some ---- like that. maybe the guy will chime in whoever did it. |
Re: how to clean injectors
Originally Posted by Xgenturbo
I remember that, it was a long time ago...something about hooking them up to a powersource to keep them open and then hooking up a tube to each one and pressuring some sort of cleaner through each injector...I forgot who posted it though, like I said, it was at least 2 years ago as I recall.
|
All times are GMT -5. The time now is 01:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands