HMT Ontario 2007 Will be CANCELED?
06-24-2007, 06:29 PM
#271
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 2,949
Re: HMT Ontario 2007 Will be the second weekend of July. 13th, 14th and 15th!
Originally Posted by d-man
I have some experience with tuning and I have blown an engine but I'm pretty sure I know what I did wrong.
NOT ENOUGH IGNITION RETARD!!!
Anyway, as mentioned previously we can have it at my place. We can use my ostrich, lc-1 and martin's burner.
NOT ENOUGH IGNITION RETARD!!!
Anyway, as mentioned previously we can have it at my place. We can use my ostrich, lc-1 and martin's burner.
06-25-2007, 04:54 PM
#274
3.0 BAR
Join Date: Sep 2003
Posts: 3,751
Re: HMT Ontario 2007 Will be the second weekend of July. 13th, 14th and 15th!
John and I both hope to male it out. We'll bring John's Copue, and maybe the XJ as my hatch still isn't done!
As for tuning. I can help out. A lot of my equipment is out of service as I tried making everything transferable from vehicle to vehicle and never finished. Damn I got to get my act together.
As for tuning. I can help out. A lot of my equipment is out of service as I tried making everything transferable from vehicle to vehicle and never finished. Damn I got to get my act together.
06-25-2007, 05:22 PM
#275
!! UNCONFIRMED EMAIL !!
Join Date: Nov 2006
Posts: 713
Re: HMT Ontario 2007 Will be the second weekend of July. 13th, 14th and 15th!
I'm building my engine this week and next week so I'm not sure. Do you have any charge piping yet? I have some but not a whole lot. Unless you want to use some HMT PVC stuff 
06-26-2007, 06:55 AM
#277
0.5 BAR
Join Date: Dec 2005
Posts: 112
Re: HMT Ontario 2007 Will be the second weekend of July. 13th, 14th and 15th!
Originally Posted by d-man
I'm building my engine this week and next week so I'm not sure. Do you have any charge piping yet? I have some but not a whole lot. Unless you want to use some HMT PVC stuff
06-26-2007, 12:05 PM
#278
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 2,949
Re: HMT Ontario 2007 Will be the second weekend of July. 13th, 14th and 15th!
Originally Posted by JK_Motorsports
John and I both hope to male it out. We'll bring John's Copue, and maybe the XJ as my hatch still isn't done!
As for tuning. I can help out. A lot of my equipment is out of service as I tried making everything transferable from vehicle to vehicle and never finished. Damn I got to get my act together.
As for tuning. I can help out. A lot of my equipment is out of service as I tried making everything transferable from vehicle to vehicle and never finished. Damn I got to get my act together.
06-26-2007, 12:19 PM
#279
!! UNCONFIRMED EMAIL !!
Thread Starter
Join Date: Dec 2002
Posts: 2,949
Re: HMT Ontario 2007 Will be the second weekend of July. 13th, 14th and 15th!
Oh and for the record guys. I can get 2.5" OD (Just over 2" ID which is perfect for charge piping) or 2.5" ID 180 degree bends out of regular aluminized steel for around 30 each. I can get Stainless 2.5" ID (perfect for downpipes for about $50 a bend. It took 1 bend to make a downpipe for my car.
I can get straight 2.5" aluminized exhaust pipe about 10 feet in length for about $60 each.
So if you guys need proper charge piping let me know how many of the 2.5" ID bends you need. I used 2 on my coupe. You might need 3 depending on your make and model.
Also, Greg. You will need a 10 foot section of straight pipe for your exhaust and 3 or 4 180 bends depending if you already have a downpipe or not. So you can do whatever is cheaper for you, either go this route and make a full mandrel bend exhaust or get the 10 foot piece of piping and get it bent out at mufflerman or a any muffler shop which I have no idea how much it will cost you but its not cheap either.
I can get straight 2.5" aluminized exhaust pipe about 10 feet in length for about $60 each.
So if you guys need proper charge piping let me know how many of the 2.5" ID bends you need. I used 2 on my coupe. You might need 3 depending on your make and model.
Also, Greg. You will need a 10 foot section of straight pipe for your exhaust and 3 or 4 180 bends depending if you already have a downpipe or not. So you can do whatever is cheaper for you, either go this route and make a full mandrel bend exhaust or get the 10 foot piece of piping and get it bent out at mufflerman or a any muffler shop which I have no idea how much it will cost you but its not cheap either.
