|
HMT Dyno Results Feb 12th <<Video Up>>
Video Up, its a bit big lol 60ish megs. A shitty 56k version is in the works.
Right-click-save as to rape Stealthmodes server: http://www.stealthmodeperformance.co...noDayFeb05.wmv Well today was a "so so" day.. Overal things went pretty well (besides the gysers of coolant on a few engines) We had the battle of "300whp" on stock engines with a few guys. Dustin was the first to start off. Turbo Ls/vtec (stock) T3/T4 (unknown specs) running 9-12psi vary Made 277whp / 180tq The next run we changed a few settings, a bit more fuel and the thing either popped a head gasket or cracked a sleeve, because it was ugly ;) Ted (cadracer) was next with Chevy Truck. SBC 350 (built 11.1 forged pistons) T04 turbo running 6psi Made 365whp / 430tq Ted's fuel pump was pretty much maxed out, stock fuel pump. We tried turning up the boost but it was leaning out pretty bad. For 6psi this thing rips! Dave (leed) also another shooting for 300whp. Stock B16a w/ GSR pistons SC61 running 13psi Made 311whp / 204tq On daves last run when he turned up the boost even higher, the spark plug was shooting coolant out like a gyser, haha. I hope you made it back home man ;) Alfy (alfaaay) running NA at the momment. GSR NA running Toda A cams, ITR Valve train. AN-R intake mani, DC 4-1 header. Made 171whp / 129tq Unknown why this thing was so low, it should bet hitting 180's. Johnny (Random-Strike) Stock Mustang 5.0 w/ Flowmasters Made 187whp / 255tq Johnny actually didnt even get one clean run in, his tranny kept coming out of gear and upshifting or downshifting. So these #'s are really inaccurate. The dyno guy calculated 228 if the tranny would have shifted right. Beau (blacksi) 88 Crx SI (race car) Stock block B16a, SRP pistons/Eagle rods block filled. 60-1 T4 turbo running 33psi! Made 467whp / 312tq Beaus car really suprised me, we didnt have any major problems other than the standard "what ------- map is loaded ?!!?!?!?" But we got things figured out, boost cranked up and it ripped pretty damn good. Beau had this big smile on his face and said "33psi" I about crapped my pants. Beau is also known for very agressive timing maps. 26.0 degrees all across the board!!! Jay (the all motor -----) running his Turbo car. EG Hatch SI Stock LS/Vtec Holset HX35 on a nice log mani (running 13psi) Made 321whp / 232tq Jay was having some problems running on 3 cylinders when he showed up, but the extra set of plugs cleared it right up. I was pretty impressed that this thing layed down those kinds of numbers. Alec (CivicZC) came up with FOOK from Oregon EF Hatch Stock ZC T3 .42/.48 w/ log mani (10psi) Made 213whp / 172tq Had some problems at first with Turboedits boost cut and a very ------ rigged HMT boost controller that spiked 20psi! Jeff (Abaz) 89 Crx SI D16a6 stock ;) Made 131whp / 115tq My first run I was almost dead on with the ass dyno 129.9whp. I figured it was going to be 130ish. What kinda sucked is I didnt have a wideband so I didnt get to see any of my air/fuels (my wideband crapped out) The race gas was a really bad idea and ran like ---- on my car. I only made 3 runs unlike everyone else who did around 5. I only changed one thing in the tune and that was take 4 degrees of timing out and gained 2whp. So basically I didnt even tune the thing. Overall I made my goal and am very happy. Leia (princess) always gotta save the best for last ;) EK Hatch Built shortblock H22 (stock head/stock cams/stock im) 62-1 Turbonetics BB turbo (21psi) Made 472whp / 365tq We made no adjustments to this thing, it ran freaking great on the dyno. We just kept turning up the boost, and going and going. The graph was really smooth. We cranked it up to 22psi and the overflow hose blew off. (meaning the coolant got pressureized somehow) Thinking the head may have lifted at high boost or the headgasket seaped slightly. But its running just fine right now, no problems. Overall it was a pretty good day.. Ya it really sucks about dustins car, and daves car. I'll get some pics up here pretty soon. I'm sure dave and fook will have some videos later on too. Jeff |
Re:HMT Dyno Results Feb 12th
holy ----!Leias car made that much power?!!!I think that will be my next project ;)
|
Re:HMT Dyno Results Feb 12th
last time i will say "pssh a girl's car"
;) i wish i had dyno time.. but then again, i really wouldnt want to find out how bad my car would do.. or if it would esplode. :( |
Re:HMT Dyno Results Feb 12th
Damn, sounds like a full day!
Good numbers on most of those cars too. :o |
Re:HMT Dyno Results Feb 12th
Holy ----, you guys have some nice numbers. It's nice to see all the stock blocks making that kind of power.
How exactly did coolant come out of the sparkplug holes? ??? That confuses me. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:HMT Dyno Results Feb 12th
Made it home. Yeee Haaaa!!
Looked over the video real quick, and theres some pretty good stuff for you guys. Cracked block or not, the CRX was still able to perform a NW style burnout for some premium bonus footage :) |
Re:HMT Dyno Results Feb 12th
Originally Posted by Dr.Boost
Holy ----, you guys have some nice numbers. It's nice to see all the stock blocks making that kind of power.
How exactly did coolant come out of the sparkplug holes? ??? That confuses me. Dustins car is the real mystery. I looked at his Uber map and actually removed a little timing for his first pull. The basemap was pretty lean on the low cam, and marginal on the high cam. I added enough fuel to get it into the low 12's, and bam, it popped. :-\ Shitty dude, hope its nothing serious. |
Re:HMT Dyno Results Feb 12th
Leed make sure you post the maps to my BIN depository when you get everythign sorted :)
|
Re:HMT Dyno Results Feb 12th
I think it's losing some coolant. :P
http://www.---------------------------/hmt/IMG_0039.JPG Looks like my POS right now. :-\ __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:HMT Dyno Results Feb 12th
Sweet cant wait to see the video
|
Re:HMT Dyno Results Feb 12th
WOW, I wish I could get My Miss' to drive a 470whp beast!!
Awsome numbers!!. Iwant my car back! |
Re:HMT Dyno Results Feb 12th
damn sucks to hear what happened dustin :-\
And jay's car is mad jaydm yO! That SBC is the ---- Leia's car looks hot on slips. beau's car, just sick. Jeff and his ass dyno, you really know how to read your ass :P RS :shrugg: don't know anything about stangs, other than those stangs look good with saleen rims :P civiczc, nice ---- looks stock I think I got in all my comments, that was off the top of my head so, if I missed anyone, oh yeah alfay(sp?) you have a dent on your fender :P but either way nice! to anyone else, nice just ------ nice :) Oh I want vid too ;D |
Re:HMT Dyno Results Feb 12th
no video ?????? :(
|
Re:HMT Dyno Results Feb 12th
http://www.---------------------------/hmt/IMG_0039.JPG
did he convert to rwd.. cause he's doin a smokey burnie right there.. ;) |
Re:HMT Dyno Results Feb 12th
Sounds like you guys had a fun day. Are any of the cars that survived the dyno, going to the track sunday?
|
Re:HMT Dyno Results Feb 12th
Jeez they just got done give them sometime. Oh those anr manis need to be portmatched to the head has the runners dont line up staright if it is anything like the skunk2 mani for the gsr. Will gain good power w/ that mod
|
Re:HMT Dyno Results Feb 12th
my car sounds and runs like ----! its fucked.... i think im done... check the classifieds... :-\
will post pics of the taredown later, but im pretty sure its fucked and im parting out the car... time for something new... :'( |
Re:HMT Dyno Results Feb 12th
go back to d series the pocket book wont car
|
Re:HMT Dyno Results Feb 12th
Originally Posted by AgentMurdoc
RS :shrugg: don't know anything about stangs, other than those stangs look good with saleen rims :P
all you need to know is foxbody AOD tranmissions = no good on teh dyn0. it wouldnt hold any gears stupid AOD ford trannies, ford is stupid for making such a dumbass shifter... 1 D OD what a joke, even the POS 305 camaros have 1 2 D OD. stock rating is 225 HP @ 4000 RPM 300 ft/lb @ 3000 RPM at the crankshaft... headers striaght exhaust k&n prob gain 15hp 20ft-lbs who knows. not a lot.. wish i could've got a good dyno run is for a baseline before the turbines. http://www.-------------------------...mt_dyno_29.jpg http://www.---------------------------/hmt/signguy1.jpg jeffs cherry bomb fell off when pat was drivin... i wanted to sport it so there it be. http://www.-------------------------...hmt_dyno_1.jpg http://www.-------------------------...hmt_dyno_2.jpg http://www.-------------------------...hmt_dyno_3.jpg http://www.-------------------------...hmt_dyno_4.jpg http://www.-------------------------...hmt_dyno_5.jpg http://www.-------------------------...hmt_dyno_6.jpg http://www.-------------------------...hmt_dyno_7.jpg http://www.-------------------------...hmt_dyno_8.jpg http://www.-------------------------...hmt_dyno_9.jpg go-kart of doom maaaaan. i wanted to ride that thing all day. http://www.-------------------------...mt_dyno_10.jpg i guess 6psi isnt enough boost to get the downpipe glowing :( http://www.-------------------------...mt_dyno_11.jpg http://www.-------------------------...mt_dyno_12.jpg http://www.-------------------------...mt_dyno_13.jpg http://www.-------------------------...mt_dyno_14.jpg http://www.-------------------------...mt_dyno_15.jpg http://www.-------------------------...mt_dyno_16.jpg http://www.-------------------------...mt_dyno_17.jpg http://www.-------------------------...mt_dyno_18.jpg http://www.-------------------------...mt_dyno_19.jpg http://www.-------------------------...mt_dyno_20.jpg http://www.-------------------------...mt_dyno_21.jpg http://www.-------------------------...mt_dyno_22.jpg http://www.-------------------------...mt_dyno_23.jpg http://www.-------------------------...mt_dyno_24.jpg i could hear a slight wheezing noise http://www.-------------------------...mt_dyno_25.jpg it got LOUDER http://www.-------------------------...mt_dyno_26.jpg http://www.-------------------------...mt_dyno_27.jpg http://www.-------------------------...mt_dyno_28.jpg |
Re:HMT Dyno Results Feb 12th
good job guys !
|
Re:HMT Dyno Results Feb 12th
tits
|
Re:HMT Dyno Results Feb 12th
Some more pics:
http://www.---------------------------/hmt/Johnny.JPG http://www.-------------------------.../JaysHatch.JPG http://www.-------------------------...uperStoked.JPG Found the secret to Beau's power, in his tool box: http://www.-------------------------...ausToolbox.JPG http://www.-------------------------...GroupShot2.JPG Videoteaser pics: The CRX was still able to lay down fatty 2nd gear burnouts :-* http://www.-------------------------...erburnout3.JPG http://www.-------------------------...erburnout2.JPG |
Re:HMT Dyno Results Feb 12th
by far the best trip to the dyno
Beau |
Re:HMT Dyno Results Feb 12th
beau ill tickle your -------
|
Re:HMT Dyno Results Feb 12th
wow you guys pulled off some ------ awesome numbers :) congrates
still waitin on that vid Dave ;) o and i ------ hate you Johnny :P http://www.-------------------------...mt_dyno_29.jpg |
Re:HMT Dyno Results Feb 12th
What a bunch of geeks. :P
http://www.---------------------------/hmt/IMG_0034.JPG __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:HMT Dyno Results Feb 12th
Hot ----, looks like a lot of dam fun
|
Re:HMT Dyno Results Feb 12th
nice middle fingers
|
Re:HMT Dyno Results Feb 12th
what was your final timing at JEff. Takin timing out made power intresting :)
|
Re:HMT Dyno Results Feb 12th
Wow, awesome time you guy's had. And is this the first time for Beau that he's been "problemless" on the dyno? You mean he got some clean runs this time? Wow :o lol
I've been lagging bigtime ever since my computers been dead, but I'll be a regular once again tomorrow :D I'm so behind on these forums... HMT NE we shouls finish up out turbo installs and hit that big "Roller of truth" sometime this spring or summer. |
Re:HMT Dyno Results Feb 12th
I just found out there is a Dynojet like 2 miles from my garage...I'm hitting them up for rates and well see what we can scheme from them ;)
|
Re:HMT Dyno Results Feb 12th
Looks like that was a fun day. cant wait to see video footage haha ;D
OT: did hotrex delete himself? |
Re:HMT Dyno Results Feb 12th
Originally Posted by AbaZ
Jay (the all motor -----) running his Turbo car.
EG Hatch SI Stock LS/Vtec Holset HX35 on a nice log mani (running 13psi) Made 321whp / 232tq
Originally Posted by AbaZ
Jeff (Abaz)
89 Crx SI D16a6 stock ;) Made 131whp / 115tq |
Re:HMT Dyno Results Feb 12th
jeff. the hp @ wheels is slightly below a b16 (stock), but the trq @ the wheels is better.
rips decent for what it is man. :thumbup: i'm eagarly awaiting the dyno vid. ;) |
Re:HMT Dyno Results Feb 12th
You guys always surprise me. I can't wait for the video! What exactly is Jay's setup (compression, head..etc)?
Stan |
Re:HMT Dyno Results Feb 12th
Originally Posted by Stan
You guys always surprise me. I can't wait for the video! What exactly is Jay's setup (compression, head..etc)?
Stan |
Re:HMT Dyno Results Feb 12th
Originally Posted by AbaZ
Alec (CivicZC) came up with FOOK from Oregon
EF Hatch Stock ZC T3 .42/.48 w/ log mani (10psi) Made 213whp / 172tq Had some problems at first with Turboedits boost cut and a very ------ rigged HMT boost controller that spiked 20psi! What a long night. 12 noon and I just got home. Someone who sold me a boost controller is getting some very unkind words. |
Re:HMT Dyno Results Feb 12th
Originally Posted by FooK
Originally Posted by AbaZ
And then it spiked again on the way home. Was holding 9psi just like on the dyno then WAM.. 16psi or so when all the rods snapped, couldnt get off the throttle fast enough.
What a long night. 12 noon and I just got home. Someone who sold me a boost controller is getting some very unkind words. |
Re:HMT Dyno Results Feb 12th
In some shitty town called nesqualie I think. Then AAA wouldn't "piggyback" the car the rest of the way. So I had to drag my dad out of bed and have him drive all the way to longview from seaside oregon to use his AAA.
It blew at like 730 and we didn't get home till like 2am. God what a long night. The thing that pisses me the most off is the car was running the best it ever has after dave tuned it. And the bastard that sold the mbc that worked great. I love the sound of engine bits flying everywhere. |
| All times are GMT -5. The time now is 02:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands